Top Cable Gland Nut Reviews

Tnuocke 2 PCS Nylon Cable Glands 1\ NPT,Waterproof Adjustable Diameter 13-25.5mm Cable Connectors,Plastic Cable Gland Joints with Gaskets 1 NPT-BK

  • Scientific Design:Inside of each grommet have rubber boot sealing ring to tight the connector, waterproof design.Wide clamping range with strong durable stretching resistance, cause no damage to cables or devices.
  • Cable glands adjustable: 13 - 25mm/0.51" - 1.0".
  • High Quality Materials:Made of high-level tensile strength & toughness, which won’t crack after used a long time in harsh environments.
  • Easy to install:You just need to thread the cable through the cable gland then tight up the sealing nut and lock nut, the cable will be tightly fixed but no need to disassemble.
  • Wide Applications:The cable glands are Wildly use to cable fixing, wire splices, machinery control boxes, distribution panels, and electrical appliances etc.
Check Stock

AMPELE Cable Gland 50 Pack Waterproof Adjustable 3-16mm PG7 PG9 PG11 PG13.5 PG16 PG19 Nylon Cable Glands Joints With Gaskets

  • 「MULTI SIZES」- 6 cable gland models from PG7, PG9, PG11, PG13.5, PG16, PG19, 50 pack in total, enough to meet various needs of cable connections..
  • 「HIGH QUALITY」- Made from high-level tensile strength & toughness PA66 material, effectively resistant to UV, moisture, water and common solvency, providing long term protection for indoor and outdoor applications..
  • 「IP68 WATERPROOF」- IP68 tested certificate cable glands come with an extra single piece of gasket, which can be used for a tighter bundle on the cable, better protecting your electrical equipment..
  • 「WIDE APPLICATION」- Wide cable range from 3-16mm/0.12-0.63inch, allowed to use in various electrical projects such as cable fixing, machinery control boxes, instrumentation and electrical appliances..
  • 「EASY INSTALLATION」- Simple steps to install: put the thread side into the hole, screw tight the lock nut, insert the cable, screw tight the sealing nut..
Check Stock

FIT Nylon Air Brake Nut, OD (1/4\ 10pcs 3/8\ 10pcs 1/2\ 10pcs) Brass Compression Tube Fitting, Nut (4G-FA-614 10pcs/4G-FA-616 10pcs/4G-FA-618 10pcs)

  • Heyco Liquid Tight Cordgrip Straight-Thru, NPT Hubs for Flexible Cords..
  • .170" Minimum Cable Diameter, .450" Maximum Cable Diameter, .875" Clearance Hole.
  • 1.72" Maximum O.A. Length, .62" Thread Length, .20" Wrenching Nut Thickness, .95" Wrenching Flat.
  • All nylon construction with TPE Sealing Gland resists salt water, weak acids and common solvents.
  • No Nut Included. Use Locknut 8461 (purchased separately).
Check Stock

OTC 7463 Fully Adjustable Gland Nut Wrench

  • Fully adjustable Gland Nut Wrench fits hydraulic cylinders on vehicles having gland nuts from 1 inch to 3-3/4 inches in diameter.
  • Reverses to work on either 7/32 or 1/4 inch pinholes.
  • Designed for use with a 1/2 inch drive ratchet or breaker bar.
  • High-grade materials ensure quality performance over the lifetime of the tool.
Check Stock

3-1/4 Shaft Packing Wrench for Hatteras Stuffing Box Packing Gland

  • 3-1/4" Shaft Packing Wrench for "Hatteras" Stuffing Box Packing Gland.
  • Leaking Packing Nut Wrench, 3-1/4" Stub Wrench.
  • Stuffing Box, Packing Gland, 3-1/4" Open Ended Wrench.
Check Stock

3' Shaft Packing Wrench for'Rudder' Stuffing Box Packing Gland

  • 3" Shaft Packing Wrench for "Rudder" Stuffing Box Packing Gland.
  • Leaking Packing Nut Wrench, 3" Stub Wrench.
  • Stuffing Box, Packing Gland, 3" Open Ended Wrench.
Check Stock

APW Wyott 21880303 Valve, Off-Hi-Lo, Gas

  • Degree of Protection : IP67 (Water Proof).
  • Total Size : 26 x 35mm / 1" x 1.4" (D*H).
Check Stock

Cable Gland -LOKMAN 34 Pack Plastic Waterproof Adjustable 3-16mm Cable Connectors Cable Gland Joints With Gaskets, PG7, PG9, PG11, PG13.5, PG16,PG19 With Durable PP Storage Case (Cable gland kit)

  • 「HEALTH & SAFTY」- All the materials passed the REACH test, which means our cable glands are super environmentally friendly, because we also care about your health, safety and the environment you are living..
  • 「SUPERIOR DURABLE」- Made of high-level tensile strength & toughness PA66 material(nylon 66 plastic), which won’t crack after used a long time in harsh environments. Please note that we use the REAL PA66 material and time will prove it..
  • 「IP68 GRADE」- The washer is the most important part for IP68 grade, it made of the extremely durable rubber – EPDM, can effectively block salt water, weak acid, UV, alcohol, oil, grease, common solvency, etc., provide long time protection for your indoor and outdoor applications..
  • 「EASY TO INSTALL」- You just need to thread the cable through the cable gland then tight up the sealing nut and lock nut, the cable will be tightly fixed but no need to disassemble..
  • 「EXTENDED WARRANTY」- QILIPSU is a trustworthy brand who always consider “CUSTOMER FIRST”, so please don’t hesitate to contact us through Amazon message if you have any questions, our after-sale team will always provide the prompt response to solve your issues until you are satisfied..
Check Stock

OTC 1266 Fully Adjustable Gland Nut Wrench for Farm and Construction Equipment

  • Fully adjustable, 2 to 6 inch (pin to pin) capacity, Gland Nut Wrench fits hydraulic cylinder gland nuts on most farm and construction equipment.
  • Reversible pins are sized at 1/4 inch and 5/16 inch to accommodate most applications.
  • Designed for use with a 3/4 inch drive ratchet or breaker bar, this tool can take the torque you dish out.
  • High-grade materials ensure quality performance over the lifetime of the tool.
  • Replacement pins (No. 204928) are available separately.
Check Stock

Baomain TZ-6 Sealed Limit Switch TZ-6001 AC 250V 15A Plunger Only for Push & Pull Door/Roll-up Door - Fits for Maxwell Pioneer Aerial Awoco Mars Air Curtains and Welbon IP65 CE Listed

  • Built-in TM miniature limit switch, strong aluminum cast shell, design for water-proof and oil-proof.
  • It is the same as TM micro switch in the rated value and characteristics.
  • Various of actuators that are taken convenience for using.
  • Each switch is equipped with cable fixator, including rubber boot, metallic washer, plastic screw nut.
  • M20x1.5 cable gland that can be equipped.
Check Stock

1266 Adjustable Gland Nut Wrench & 7463 Universal Hydraulic Cylinder Spanner Wrench For Most Farm and Construction Equipment (set of 2)

  • WORKS ON -- Alternative to OTC 1266 & 7463. For use on hydraulic cylinders with nuts from 2" to 6" (51mm to 152mm) and 1" to 3-3/4" (25 - 95mm)..
  • NICE DESIGN -- 1266 Reversible to fit 1/4” & 5/16” diameter pin holes, 7463 Reversible to fit 1/4 & 7/32" diameter pin holes. Both are manufactured from quality steel..
  • COMPATIBLE WITH -- Specially designed to fit hydraulic cylinders on most farm and construction equipment. Repair tool for backhoe and other heavy equipment / farm machines / hydraulic machinery..
  • BENEFIT -- Heavy duty wrench features a 3/4”(1266) / 1/2"(7463) square drive to tackle even the most stubbom gland nuts..
  • A MUST HAVE -- The ability of these tools to work on gland nut from 2" to 6" / 1" to 3-3/4" is a valuable quality, enabling it to be used in a variety of ways..
Check Stock

Compatible Schiller 10 Leads Cable Banana 4.0mm 15 Pins 9.8 ft AT10, AT10 Plus, AT101, AT102, AT102-Plus, AT104, AT110, AT3, AT5, AT6, AT60, C6, CS6, MS2010, MS2015

  • Total Size : 24 x 34mm / 0.9" x 1.34" (Max.D*H).
Check Stock

OTC 6613 Variable Pin Spanner Wrench & OTC 7463 Fully Adjustable Gland Nut Wrench

  • Product 1: OTC's Variable Pin Scanner Wrench features a universal design that fits many different types of pulleys having slots or holes, including camshaft pulleys, crankshaft pulleys, and more.
  • Product 1: Wrench is adjustable from 1-1/4 inches to 5 inches by loosening single adjustment bolt.
  • Product 1: Use wrench as-is with it's approximate 12 inch overall length, or for more leverage, use with a 1/2 inch drive ratchet or breaker bar.
  • Product 1: Set includes the following pairs of high-strength steel pin sizes: 3.5 mm, 4 mm, 4.5 mm, 5 mm, 6 mm, 7 mm, 10 mm plus a heavy-duty steel handle assembly.
  • Product 2: Fully adjustable Gland Nut Wrench fits hydraulic cylinders on vehicles having gland nuts from 1 inch to 3-3/4 inches in diameter.
  • Product 2: Reverses to work on either 7/32 or 1/4 inch pinholes.
  • Product 2: Designed for use with a 1/2 inch drive ratchet or breaker bar.
  • Product 2: High-grade materials ensure quality performance over the lifetime of the tool.
Check Stock