Top Cable Cutter Aerowave Antennas Reviews

MIHAO Steel Cable Cutter - Wire Rope Cutter - Bicycle Cable Cutter for Cable Railing,Up to 5/32 inch Copper Cable Cutter with 10Pcs Bike Brake Cable Cap End Tips, Red&Black, 7.7 x 2.2 x 1.2 inches

【EXCELLENT DESIGN】Mihao cutter heavy duty is designed for cutting steel wire, It can cut less than 5/32" hard steel cable, wire rope, spring wire, aluminum cable etc. Mihao Wire Cutter is very sharp and clean cut.
【HIGH QUALITY MATERIAL】 Mihao Wire Cutter is made of Chrome-Vanadium Steel, durable, cut quick. Knife edge had a heat treatment, so which made the blade hard enough to cutter.
【SIMPLICITY OF OPERATOR AND WORKS WELL】 Mihao cable wire cutter use to operate easily with one hand, Because Mihao wire cutters has a Labor-saving spring. Practical and durable-make very precise, very clean cuts without fraying or smashing the ends, it not only cut the cutaway cables and ripcords perfectly also great for grommet removal.
【APPLICATION】 Recommended for installing less than 5/32”cable railing projects, bicycle Cable, stainless steel wire rope, aircraft cable, copper cable, aluminum cable etc.
【PACKAGE DETAIL】 Cable Cutters includes a 8 inch stainless steel wire cutter for cutting steel wire which up to 5/32”, with 10pcs bike brake cable end caps, ST:Stainless Steel Wire Rope Cutter Bicycle Cable Cutter for Cable Railing Deck Copper Steel Cable Cutter.

Check Stock

ANLI TA-1UHF Antenna Trunk Mount For SO-239 Thread Antennas

UHF or SO-239 Thread Trunk mount accepts Optional Antennas having a PL-259 " UHF , M or PO " base thread..
For Standard Sedan type Trunks. Includes 15ft RG-58A/U Coax cable with PL-259 Connector..
Great for Amateur radio & Two way mobile antennas having an UHF base thread..
Fits ANLI WH-713 and WH-717 DualBand antennas, & other " UHF" ( SO-239 ) type base thread antennas..
Heavy Duty with 4 Allen bolt connecton and Ability for slight angle Adjustment.

Check Stock

SiriusXM Satellite Radio Antenna Signal Combiner, Combine Two Sirius or XM Antennas Into One Cable for Better Signal

Satellite Radio Antenna Signal CombinerSirius XM Radio Antenna Signal Combiner.
Combine the Output of 2 Different Satellite Radio Antennas into One Cable.
Helps to Increase Signal Strength for Installations Where 2 Antennas are Able to be Installed.
Includes Antenna Converters, Inline Amp, Combiner, and 3 Foot Whip Cable.
RG6 Coax Cable can be Used to Increase the Cable Run on the Combined End After the Inline Amplifier.

Check Stock

Heavy Duty NMO 5' Antenna Magnet Mount w/ 15ft Cable - ANLI JM-100NMO

Super High Quality, Heavy Duty Black large 5 inch diameter Magnetic mount accepts Optional Antennas having an " NMO " base thread..
The Genuine ANLI JM-100 in ANLI Package! Includes 15ft RG-58A/U Coax cable with PL-259 Connector..
Great for Amateur radio & Two way mobile antennas having an NMO base thread..
Fits ANLI DC-124H Triband antenna, & other " nmo" ( motorola) type base thread antennas..
Optional Adapters available for conversion to PL/SO or 3/8-24 antennas too..

Check Stock

Sirius XM High Gain Interoperable Magnetic Satellite Radio Car Antenna

XM Satellite Radio magnetic roof mount antenna.
This antenna leaves a small footprint on your vehicle, allowing for a clean and professional-looking install.
This 23-foot Antenna Cable will work on even the largest cars and SUVs.
All of our antennas are direct OEM, XM Approved replacement antennas.

Check Stock

Knipex 74 21 250 High Leverage Diagonal Cutters 9,84\ 12° angled

Material--The Cable Cutter is manufactured from 55# steel and is hardened for durability and strength..
Special Design--Cable Cutters Heavy Duty with optimal geometry blade geometry ensures that the cable stays round during the cutting process so connectors are easy to affix to the cable.
Convenient--Cable wire cutter is easy cutting with one hand operation.
Comfortable Handle--Compact cable cutter comfort grip handles for extra comfort and grip during use..
Application--Cable cutter stripper provides outstanding cutting performance on solid copper wire, twisted pair and coax cables..

Check Stock

Poodle Clipping and Grooming: The International Reference

High Quality Cable Cutter - This cable cutter works excellent in cutting up to 5/32" wire rope cable of all kinds. It is widely used in industrial and home applications like cable railing, fencing, bike brakes, and other DIY projects. Recommend using with 1/8" stainless steel wire rope WR01 and hydraulic crimper CR09. Package includes: 1pcs cable cutter.
Clean Cut - The blade of this wire rope cutter is quite sharp and durable since the blade is made of manganese steel and has been hardened by high-frequency quenching. This steel wire cable cutter can make exact and clean cuts without fraying or smashing the cable ends.
Safe and Easy - The safety lock prevents accidental opens and cuts that might hurt you. The ergonomic one-hand operation and non-slip rubber grips make it work easily. With telescopic spring and lightweight design , it is beginner-friendly and portable.
Pre-Designed System - We pre-designed a NightScape cable railing system to help you get a fully customized project, including black cable railing kit CB05, adhesive washer CR86, stainless steel cable WR17, cable cutter CR12, socket wrench CT16, dril....

Check Stock

kesoto 4Pieces Antenna Transformer Coaxial Antenna Adapter Antenna Balun 300 Ohm to 75 Ohm Converter UHF VHF FM Matching Transformer Black

Converts receiver connection to cable or wire..
Compatible with all Channel Master outdoor TV antennas..
Crimped, soldered spade lugs for signal integrity and durability..
Convert outdoor antenna connection to coaxial cable input..
Transforms signal impedance from 300 Ohms used in coaxial cable to 75 Ohms used in antennas..

Check Stock

Ruiling 2pcs TV Antenna Connector Coaxial Cable Matching Transformer UHF/VHF/FM Model TV Converter 300 to 75 Ohm

Transforms signal impedance from 75 Ohm used in coaxial cable to 300 Ohm used in antennas.
Compatible with all Channel Master outdoor TV antennas, convert outdoor antenna connection to coaxial cable input.
Matches an unbalanced, coaxial F-type cable with balanced twin leads, connect 75 ohm cable to 300 ohm TV antenna terminals.
Crimped, soldered spade lugs, integrate and durable signal.
There is no requirement or need to ground either lead this would remove the balance from the system because the left and right twin leads connect to a....

Check Stock

ZAOTOTO Cable Cutter Heavy Duty Wire Rope Cutter for DIY Projects Railing Decking Wire Seals & Bicycle Cable | Sharp & Precise One-Hand Operation Steel Cable Cutter

This cable cutter is designed for cutting steel wire which up to 5/32', If you want to cut the steel cable seals, single strand wire, like the fencing wire, any bolt cutter should do. after 200 cuts off the 1/8'' 7x7 assemble coated steel security cable it still very sharp and clean cut.
wire Cutter is an excellent Cutter for both soft and hard steel cable or wire rope:Labor-Saving Spring-loaded Design.
Durable PVC Dipped handles for added grip..
SAFTEY LOCK DESIGN - The thumb catch designed for one-handed operatio, which make it more safe, durable and rustproof. Labor-saving spring roll designed for easy operation. An excellent tool for cutting stainless steel wire rope..
NON-SLIP RUBBER HANDLE - cable cutter handle is vinyl coated, which made it non-slip. The bright red handle made it easy to be found out in a crowded toolbox..
DIMENSION & PACKAGE- LuckIn cable cutter length 7.6 inch , width 2.2'. Package includes 1 x Cable Cutter..

Check Stock

Sanuke Cable Cutters, 6-Inch High Leverage Cable Cutter Heavy Duty---Multifunctional Compact Sharp Cutting for Aluminum, Copper, Wire, Communications Cable

【High Quality Wire Cutter】6-inch cable cutter is forged with chrome vanadium steel through heat treatment, high hardness, durable and wear-resistant. The inclined surface design of the jaw can avoid the collision and damage of the two cutting edges during operation..
【Sharp and Smooth Cuts】Through high-frequency quenching, polished and hardened, the jaw of cable cutter is really sharp. The shear force is strong, durable and the cutting is smooth, performing well even in confined spaces..
【Multifunctional Cable Cutter】Double-blade design, one-cut for two purposes. The small blade can be used for stripping thin wires while big blade is used to cut large wires..
【PVC Non-slip Handle】Non-slip PVC material and matte sense handle, is comfortable to grip. PLEASE NOTE: the handle is not insulated, do not cut live wires..
【Cutting Rang】This cable cutter is suitable for cutting soft wire like copper, aluminum or communication cables. PLEASE DO NOT cut steel, iron wires, steel strands, steel core cables, and hard steel wires..
【Compact Cable Cutter】6-inch cable cutter looks compact. It’s convenient to carry that you can put in your pocket easily..

Check Stock

AudioVox SRB-MM Truck Mirror Mount Bracket

The Terk SRBMM antenna bracket is a perfect accessory for your magnetic mount antennas. Enjoy either brand of your magnetic base satellite receivers, Sirius or XM..
SRBMM's chrome plated weatherproof design has made it a perfect antenna mount for outside use..
It also features a 3-foot cable protector and adhesive pad for ease of installation..
You don't need any tool to install antenna using SRBMM..
SRBMM features a 3-foot cable protector and adhesive pad for ease of installation. It clamps easily to a mirror support bar that is up to 0.75-Inch diameter. You don't need any tool to install antenna using SRBMM..
Compatible with SIRIUS and XM magnetic mount antennas.
Comes with 3' cable protector and adhesive pad for semi-permanent antenna installation, no tools needed.
Fits 1/2" - 3/4" diameter side mirror supports.
Includes 3 cable protectors and adhesive pad for semi permanent antenna installation.

Check Stock

E-outstanding 2-Pack TV Antenna Connector 300 Ohm to 75 Ohm Coaxial Cable Matching Transformer UHF/VHF/FM Model TV Converter

Transforms signal impedance from 300 Ohms used in coaxial cable to 75 Ohms used in antennas.
Compatible with all Channel Master outdoor TV antennas,Convert outdoor antenna connection to coaxial cable input.
Matches an unbalanced, coaxial F-type cable to balanced twin leads,Connect your 75 ohm cable to your 300 ohm TV antenna terminals.
Crimped, soldered spade lugs for signal integrity and durability.
As the left and right twin leads connect to a balanced antenna or set of terminals, there is no requirement or need to ground either lead this would....

Check Stock