Top Cable Bracket Mount Reviews

VESA Mount Adapter Bracket for Dell ST-Series Monitors - ST2420L, ST2421L/LB, ST2220M/LC, ST2321L/LF, ST2320L (V3) - by HumanCentric

  • FITS DELL ST-SERIES MONITORS: This bracket is ONLY tested and guaranteed to work with: Dell ST2420L, ST2421L, ST2421LB, ST2220L, ST2220LC, ST2220M, ST2321L, ST2321LF, and ST2320L - V3 is stronger with less flex, plus pre-installed hardware! (WILL NOT WORK WITH OTHER MODELS).
  • MOUNT YOUR DELL ST-SERIES MONITOR ON A STANDARD VESA MOUNT - Even though these monitors weren’t made with mounting holes, our convenient bracket enables you to connect your Dell ST-series monitor anyway! Whether you’re looking to mount it on the wall or just get it off your desk, this bracket will let you connect your monitor in seconds. Works with double and triple (and more) mounts too!.
  • EASY INSTALLATION - You’ll be able to install this bracket in less than two minutes with nothing more than a screwdriver! Just remove the existing base and snap ours in place instead - then connect it right to the VESA mount. We’ve tested our mount extensively to make sure it fits your monitor just right..
  • TAME THE CABLE MONSTER - Our handy cable slot is the perfect way to keep your cables organized. Rather than having them hang out the back of the monitor, just slip them right through the slot and run them back along your mounting arm..
  • SATISFACTION GUARANTEED - If you have any proble....
Check Stock

SMA Male Antenna Dual Band 2m/70cm Whip Handheld Radio Antenna Portable Replacement for YAESU/Vertex VX-110 VX-130-132 TYT TH-2R TH-F5 TH-F8

  • 144/430Mhz NMO Antenna Work for Motorola Kenwood Icom Vertex Blackbox HYT Hytera Mobile Radios. NMO to PL259 working for so239/uhf female Dual Band Radio..
  • The mount is a "trunk lid" mount with 13'/about 4m RG-58U cable. This requires a small (typically 3/8" to 3/4" ) hole be drilled through the surface hosting the mount, and is the best choice for an extremely rugged installation..
  • L-Bracket Hole Stainless Steel 3/4" NMO Hole Mount, L Bracket for HYS TCJ-N1 Coax NMO Mount Cable Mobile Antennas Car Truck Hood install. Stainless Steel L-bracket for Trunk Groove Or Side Mounting..
Check Stock

VESA Mount Adapter for Acer Monitor XG270HU G247HYU G277HU R240HY Abmidx Does not fit R240HY bidx [Patent Pending] - by HumanCentric

  • FITS SPECIFIC ACER MONITORS: This bracket is tested and guaranteed to work with: Acer XG270HU, G247HYU, G277HU, R240HY Abmidx (Does not fit R240HY....
  • MOUNT YOUR ACER MONITOR ON A STANDARD VESA MOUNT - Remove the ENTIRE stand and snap this custom bracket right into your monitor. Even though these....
  • EASY INSTALLATION - You’ll be able to install this bracket in less than two minutes with nothing more than a screwdriver! Just remove the existing....
  • TAME THE CABLE MONSTER - Our handy cable slot is the perfect way to keep your cables organized. Rather than having them hang out the back of the....
  • SATISFACTION GUARANTEED - If you have any problems with your mount, send it right back to us - no questions asked. Our bracket is guaranteed to fit....
Check Stock

Bingfu Vehicle Ham Radio Mobile Radio Antenna VHF UHF 136-174MHz 400-470MHz Car Truck Amateur Radio NMO Mount Low Profile Antenna with Lip Mount Fixed Bracket PL259 Male 5m 16.5 feet RG58 Cable

  • Compatible with: Cobra, Uniden, Midland, Galaxy, AnyTone, SAMCOM, Stryker, President, Tram, Radioddity, Pro Trucker, Vehicle Car SUV Truck Ham Radio,....
  • Feature: with Through Hole Mounting Fixed Bracket Lip Mount.
  • Antenna Mounting Connector: NMO Mount 50 Ohm Connector.
  • Cable Connector: UHF PL259 Male 50 Ohm Connector.
  • Package List: 1 x Lip Mount Bracket with Cable (including Hexagon Wrench) (As the Picture Shown).
Check Stock

Full Motion TV Wall Mount Brackets for Most 26-55 Inch LED LCD Flat Curved Screen Monitors TVs, Single Articulating Arm TV Mount Swivel Tilt Extension, Max VESA 400x400mm Up to 88lbs by Pipishell

  • ...e ! this full motion tv wall mount satisfies all your needs. Swiveling 180 degrees from left to right while Tilting +6.3°/-16.6°enhance your viewing experience. Extends out 19.69″ from wall for cable plugging and sitting flush against wall. 3 degree level adjustment for perfect leveling..
  • Universal Wall Mount TV Bracket Design – This single stud mount fits TVs with 26, 28, 32, 36, 37, 42, 46, 47, 48, 49, 50, 55 inch flat/curved screens weighing up to 88 LBS. Check that your TV is VESA-compliant with screws 75mm x 75mm to 400mm x 400mm apart. Be sure also that you install this corner tv mount on a concrete wall /brick wall or wood studs..
  • Solidly Built Wall Mount Protect TV From Falling – Four upgraded and thickened extender brackets give your TV under 55” the greatest support on the wall. Structure of slim and sleek one piece wall plate with exquisite hollow panel space for threading, our tv wall mount bracket offers enough room for cable organization and adequate ventilation..
  • Easy to Hang tv mount On Wall – Comes with a universal hardware pack and a detailed installation instruction, it will be painless for you to mount this tv mount 55 inch on the wall. To make things even better, this swivel TV mount makes wire management simple. Cables ....
Check Stock

Mounting Dream TV Wall Mount for Most 26-55 TVs TV Mount Full Motion with Swivel Articulating Arm Perfect Center Design Wall Mount TV Bracket up to VESA 400x400mm and 77 lbs Loading MD2418-MX

  • [Universal TV Mounting Bracket]: Versatile TV wall mount fits most 26-55" LED, LCD, OLED, 4K, flat screen or curved, TVs or monitors up to 77lbs, with VESA ranging from 75x75 to 400x400mm. Articulating TV mount is designed for single wood stud, ok for concrete/brick wall as well..
  • [Corner TV Wall Mount with Cable hider]: Upgraded from previous model MD2413-MX swivel mount, this TV mounting bracket MD2418-MX comes with self-stick EVA pad for the articulating arms to reduce any scratch or crash on TV. Three cable clips will manage any cables behind TV, which makes the viewing environment neat and more comfortable..
  • [Long Extension TV Mount with Swivel and Tilt]: This swivel TV mount brackets with articulating arms provides +5°/-15° tilt, +/-90° swivel, +/-4° level, which help reduce glare and optimize your special viewing experience. The adjustable TV wall mount can extend up to 16.7" and retract back to 2.7" to save space for a sleek and tidy appearance and pivot TVs left or right..
  • [Easy TV Mount]: Coming with mounting template and instruction, complete mounting wall mount with TV bracket in less than 30 minutes. Also, most of necessary hardware, like TV screws, bolts, washers, spacers and etc., is in pre-labeled bag, and the bubble level will ....
Check Stock

HYS Dual Band NMO Antenna, VHF/UHF Pre Tuned Amateur, W/13ft Low-Loss RG58/U Coaxial Cable with UHF-Male(PL259), Stainless Steel L Bracket, Trunk/Hole Mount for Car

  • [High Frequency] The HYS antenna features VHF of 144/430 MHz (136-174MHz and 400-470Mhz) with VSWR:< 1.5, Gain: VHF 2.15/ UHF 3.15 dBi for better TX and RX..
  • [Efficient Performance] The antenna exhibits a maximum input power of 150W that works for all 2 meter 70 centimeters mobile radios..
  • [Durable] The mount is a “trunk lid” mount with 13 ft low-loss RG58U coaxial cable with UHF-male(PL259) connector installed. This is a high quality, low profile base mount that does the job very well..
  • [Easy Installation] The HYS antenna is equipped with 13 ft NMO cable that is connected easily with the antenna and still have plenty cable left to reach the antenna mount practically anywhere on your car or another other vehicle. For a rugged installation, all you require is a small, typically 3/8 inch 3/4 inch, hole to be drilled through the surface that will host the mount..
  • [Package Contents] The HYS package includes L-bracket hole stainless steel for trunk groove or side mounting, 3/4″ NMO hole mount with screws and L-bracket HYS TCJ-N1 coax NMO mount cable, mobile antennas perfect for car and truck’s hood..
Check Stock

Soundbar Mount for Sonos Beam Wall Mount Bracket Compatible with Sonos Beam Sound Bar Mounts Mounting Bracket, Black

  • ...t stability and ensures a vibration free setup, it can give you a wonderful music experience. Two sturdy latch bolts securely lock your soundbar, the exact fit distance between two mounting points of the soundbar..
  • Easy Port Access: The backspace of this sound bar mounting bracket is designed for cable connecting to the soundbar, which allows convenient placement for power cords, hdmi, or ethernet cables..
  • Save Space: This wall bracket is easy to install and is ideal for mounting on the edge of the wall to get enough space, then you don't worry about the soundbar taking up your space anymore. This soundbar bracket can mount your soundbar above or below your TV, creating an attractive visual display and enhanced sound..
  • Easy to Install: The sound bar shelf mount comes with a comprehensive mounting hardware kit and detailed installation instructions, the installation takes just 15 minutes. You can mount this sound bar mount bracket on wood studs, brick or concrete wall..
Check Stock

Mount-It! Low-Profile TV Mount | Flush Large TV Wall Mount | Slim Fixed TV Mount for 42-70 in. Screen TVs | VESA Compatibility up to 850x450 | 220 lbs Capacity

  • FIXED LOW PROFILE TV MOUNT - Big Screen TV mounting bracket designed for large screen TV's & monitors ranging between 42 - 70 inches. Ultra-slim TV mount design sits a mere 1 inches off the wall with cable management cutouts.
  • SECURE TV WALL MOUNT - The lower bar mount and TV VESA bracket can be pad-locked (not included) together after the TV is set and centered along the bracket to secure the perfect placement and positioning. Wall mount can be anchored to 8, 16 or 24 inch spaced studs.
  • HEAVY DUTY STEEL WIDE BRACKET - Flush mount Large TV bracket attaches to the included VESA pattern. Compatible VESA measurements: 850x450, 800x400, 750x450, 700x400, 600x400, 600x300, 600x200, 400x400, 400x300, 400x200, 300x300, 300x200, 200x200, 200x100, 100x100. The mount can hold a maximum weight capacity of 220 Lbs.
  • QUICK & EASY INSTALLATION - The included mounting kit comes complete with simple instructions, integrated bubble level and hardware..
  • TRUSTED U.S. BRAND - Backed by a multi-year warranty and supported by our expert, US-based, customer satisfaction team we will be happy to answer any of your mounting questions.
Check Stock

MEKNIC Dual Cold Shoe Mount Plate Adapter,Dual Hot Shoe Extension Bar for Monitor Microphone LED Video Light Compatible with Sony Canon Nikon DSLR Compact Camera Vlog Film

  • ...se adapter with a special corner design can prevent devices from slipping..
  • ✅Hot Shoe Mount Attach Base: 1/4” thread hole with hot shoe adapter design in the bottom for your tripod,handle grip and other camera support and compatible with all hot shoe/cold shoe mounting devices..
  • ✅Multifunctional Cold Shoe Mount Bracket: Built-in Cable Slot Bayonet:Slot width 4mm,depth 3.5mm,prevent cable from loosening and falling off.
  • Extra Two Standard 1/4’’ Threaded Holes can attach other device as per your need.Perfect for filming maker/youtuber/ vloggers to finish video recording..
  • ✅Detachable Shoe Extension Plate Design: Can be remove as two parts for different use.1/4’’ thread hot shoe cold mount can use with extension bar mount like magic arm to DSLR camera.
  • Dual cold shoe bracket can use with other camera brackets like L bracket..
  • ✅Durable Metal Construction Dual Cold Shoe Mount : Precise CNC machined,Made of whole aluminum alloy with Black anodized won't be easy to suffer corrosion or breakage and enhance higher durability and Stability when shooting.Made of Aluminum alloy, very stable and durable.
  • weight only 48g / 1.69oz, easy to carry around..
Check Stock

Bingfu Vehicle Ham Radio Mobile Radio Antenna Dual Band VHF UHF 136-174MHz 400-470MHz Amateur Radio Antenna Car Truck Lip Mount Fixed Bracket NMO Mount Low Profile Antenna with 5m 16.5 feet Cable

  • Frequency Range: VHF 136-174MHz, UHF 400-470MHz.
  • Cable Connector: UHF PL259 Male Connector.
  • Compatible with Amateur Mobile Radio, Ham Radio, FRS GMRS Two Way Radio: BTECH, ICOM, Kenwood, Midland, Yaesu, TYT, AnyTone, Radioddity, Cobra, Uniden, President, Galaxy Audio, Pro Trucker, Stryker.
  • Compatible with: Marine Boat VHF Radio, Ham Radio, Two Way Radio, Amateur Radio, FRS GMRS MURS Radio, Walkie Talkies.
  • Package List: 1 x Antenna, 1 x Lip Mount Bracket with 5m Cable(including Hexagon Wrench) (As the Picture Shown).
Check Stock

Bingfu Vehicle Mobile Radio Antenna Fix Bracket Mounting Lip Mount with 5m 16.5 feet UHF PL259 Male to SO239 Female Bulkhead Mount RG58 Cable for Car Truck Ham Radio Amateur Radio

  • Compatible with Amateur Mobile Radio, Ham Radio, FRS GMRS Two Way Radio: BTECH, ICOM, Kenwood, Midland, Yaesu, TYT, AnyTone, Radioddity, Cobra,....
  • Feature: with Through Hole Mounting Fixed Bracket Lip Mount.
  • Connector: UHF PL259 Male 50 Ohm Connector.
  • Connector: UHF SO239 Female Right Angle Bulkhead Mount 50 Ohm Connector.
  • Package List: 1 x Cable, 1 x Lip Mount Bracket(including Hexagon Wrench) (As the Picture Shown).
Check Stock

Mount-It! Low-Profile Large TV Mount | Flush TV Wall Mount | Ultra-Slim Fixed TV Mount for 42-70 in. Screen TVs | VESA Compatibility up to 800x400 | 220 lbs Capacity

  • FIXED LOW PROFILE TV MOUNT - Big Screen TV mounting bracket designed for large screen TV's & monitors ranging between 42 - 70 inches. Ultra-slim TV mount design sits a mere 1 inches off the wall with cable management cutouts.
  • SECURE TV WALL MOUNT - The lower bar mount and TV VESA bracket can be pad-locked (not included) together after the TV is set and centered along the bracket to secure the perfect placement and positioning. Wall mount can be anchored to 8, 16 or 24 inch spaced studs.
  • HEAVY DUTY STEEL WIDE BRACKET - Flush mount Large TV bracket attaches to the included VESA pattern. Compatible VESA measurements: 850x450, 800x400, 750x450, 700x400, 600x400, 600x300, 600x200, 400x400, 400x300, 400x200, 300x300, 300x200, 200x200, 200x100, 100x100. The mount can hold a maximum weight capacity of 220 Lbs.
  • QUICK & EASY INSTALLATION - The included mounting kit comes complete with simple instructions, integrated bubble level and hardware. Mount-It! TV mounts work with all major TV brands including Samsung, Sony, TCL, Vizio, Hisense & more.
  • TRUSTED U.S. BRAND - Backed by a multi-year warranty and supported by our expert, US-based, customer satisfaction team we will be happy to answer any....
Check Stock