Top C glass Fiber Reviews

LEKUSHA 12ft Balloon Arch Kit with 1.9 Jaw Opening Clamp Fits for 5-8 Feet Long Table Great for Birthday Baby Shower Graduation Wedding Christmas Indoor Outdoor Party Supplies Decoration

  • 12 feet table balloon arch kit fits up to 1.9" thick table, can securely hold on 5-7 feet long table. | NOTICE: The glass fiber poles have some....
  • Package included: The kit comes with 10 durable glass fiber poles with shock cord inside, 2 solid C-clamps, and 30pcs balloon clips..
  • Long Time Use: Glassfiber poles are sturdy and flexible, easy to bend but will not crack easily like plastic tubes. solid C-clamp with an adjustable....
  • Easy to Use with Short Time: 1. Connect the poles together.
  • 3.Put the end of arch into the hole of clamp.
  • Versatile - This balloon arch kit is a necessory for birthday party, baby shower party, graduation party, wedding, Christmas or other holiday events.....
Check Stock

3DXTECH FibreX PA6-GF30 Glass Fiber Reinforced Nylon, 1.75mm, 500G 3D Printing Filament

  • 30% glass fiber reinforced Nylon 6 Copolymer.
Check Stock

Table Saw Dust Collector Bag for Bosch/Rigid/Ryobi/DeWalt/Kobalt/Skilsaw/Craftsman/Porter/Cable/Delta/Makita/Metabo 10\ TableSaws | Universal 2.5\ inch Dust Port (2 Pack)

  • 003cb003eOFFSET HANDLE003c/b003e to move hand farther away from spinning blade or router bit..
  • 003cb003eMANUFACTURED OF GLASS FIBER-REINFORCED NYLON003c/b003e for stiffness and shatter-resistance..
  • 003cb003e3/8 INCH WIDE003c/b003e for safely making those skinny cuts..
  • 003cb003eNEOPRENE STRIP003c/b003e on bottom for better grip and control..
  • 003cb003e1/4-in HEEL003c/b003e for securely hooking boards..
Check Stock

Table Balloon Arch Stand Kit, 13Ft Adjustable Reusable Table Balloon Arch Kit with Base High Strength Glass Fiber Pole for DIY Party Wedding Birthday Baby Shower Xmas Festival Merry Christmas Decorations

  • 【13FT TABLE BALLOON ARCH KIT】 The Balloon garland stand the total length of the poles is 13 feet. 10 flexible fiberglass poles, Each pole measures 15.5 inches, The poles are built with high strength Glass Fiber, Quality to strengthen More durable, Appearance optimization smoother. Added balloon arch holder stand connection improve strong shock cord internal, Folding part open for direct use..
  • 【EASY TO ASSEMBLE】The table arch holder Kit Reduce the time of the splice bar, Only 2 Minutes, Take it out and pull it straight Then just link the base on both sides, 2 steps to build the tabletop balloon stand kit! (Tip: Need Two people are required to pick up the straightened pole at the same time and arch it into the C-clamp.).
  • 【ALUMINUM ALLOY C-CLAMP】 Strengthen design The C-clamp wide adjustable range can 6Cm/2.36Inch fit most of the tables, The C-clamp mounts are made from strong engineering aluminum alloy with a sponge pad, will not hurt the table. There is an auxiliary screw tool under the clip, no other tools are needed. (Tip: The clamp fits in a 6cm thickness table, Please check the thickness of your table before you purchase.).
  • 【PACKAGE INCLUDED】The balloon arch stand comes with 10 poles Total length 13Ft glass fiber poles with Bold shock....
Check Stock

Soundsulate Acoustical Ceiling Tile Sound Barrier, Foil Faced Mass Loaded Vinyl Soundproofing with 1″ Duct Liner Decoupler, 16″ X 30″

  • Combines 1lb/sf, 1/8″ thick foil-faced mass loaded vinyl with a 1″ thick Bonded Glass Fiber Blanket Decoupler..
  • Use as a ceiling tile noise barrier or anywhere that you would install fiberglass insulation and require sound control.
  • Significantly higher performance than 1 LB MLV. Excellent thermal and acoustical performance, STC rating of 29, R-Value: 4.1.
  • Fire Rating: Class 1 or A per ASTM E84, ASTM C1338-00, ASTM CM411-05, ASTM C665, ASTM C795, ASTM 1304 and UL723.
  • Sold in lots of ten 16″ x 30″ pieces.
Check Stock

CZH-LABS DSUB DB62HD Male/Female Header Breakout Board D-SUB Breakout Moudle.

  • Standard DB62HD Male/Female header connectors. Male header, female header and screw terminal 1:1:1 connects for per line..
  • Rated voltage: 60V. Rated current: 1A / per pin. Operating Temperature: -20ºC to 50ºC.
  • Terminal block: Pitch 3.81mm/0.15" miniaturization screw terminal block. Wire range - 26-16AWG. Strip length - 5mm. Screws - M2,steel,Cr3+ Zn plated.....
  • FR-4 fiber glass PCB, dual copper layers..
Check Stock

Mophorn Heating Mantle 2000ml Electric Magnetic Stirring Heating Mantle 600W Digital Magnetic Stirrer Mantle, Max Temp 450 ° C Digital Magnetic Heating Mantle Kit 2000ml

  • Product Parameter: Stirring volume: 2000ML.
  • Stirring speed: 0-2000 R/MIN, Frequency: 60Hz..
  • Alkali-free Glass Fiber: Alkali-free glass fiber is used as insulation materials, wire of nickel-chrome material is sealed in the insulation layer and weaved into semisphere internal heater..
  • Stirring & Heating Function: Electronic heating mode and magnetic stirring feature large heating area, fast warm-up, high-temperature evenness, and adjustable heating power..
  • Accurate Digital Display: Intelligent digital display is convenient to control temperature, accurate and intuitive. Stepless speed regulation is characterized by fast warm-up, high-temperature evenness, and accurate control..
  • Multiple Application: Ideal equipment for liquid heating and stirring used in the experimental analysis, and education & research development field..
Check Stock

KDP Automotive Elbow Heater Hose Connector (L-1/2“X1/2\(Elbow: 13X13MM), pack of 2

  • Usage: Universal and widely used for conectors of the vacuum line and rubber heater hose in engine bay,also can use as the connector of coolant hose.
  • High Quality Material:PA66-GF33 nylon with 35% glass fiber, high temperature resistant and durable.
  • High Temperature Resistance: -40 Deg. F to +257 Deg. F (-40 Deg. C to +125 Deg. C).
  • Maximum Pressure: 150 pounds_per_square_inch.
  • ECONOMICAL: Compared to other types of fitting, this one is considered more economical with high value system component options..
Check Stock

YaeTek Professional Microwave Kiln Glass Jewelry DIY Tools with kiln Paper Small

  • Including 1 Small Microwave Kiln, 1 bag(8pcs-10pcs/bag) kiln paper.
  • Microwave kiln outter size: 4.72*3.26 inch (12*8.3cm),inner size: 3.15*1.77 inch (8*4.5cm),weight:1.1 lb (0.5kg), Material: Ceramic fiber.
  • Microwave kiln is a new type of high temperature oven for glass melting or softening and it is popular in Europe and the United States areas.It can....
  • Microwave kiln material for high temperature heat-resistant fiber, although the maximum temperature inside the kiln up to 900°C (1650 °F), but the....
  • As long as a set of microwave kiln sets and a home microwave oven, you can become jewelry designer. Simple operation, just 6 minutes to complete a....
Check Stock

SSLC MR16 Halogen Bulbs 20W 12V Light Bulbs GU5.3 Bi Pin Base 2700K Warm White Dimmable for Landscape Track Lights Fiber Optics Desk Lamps BAB C Spotlights with Glass Cover

  • ENERGY SAVING HIGH OUTPUT: 20 Watts BAB, 260 Lumens. Low Voltage: 12 Volts A/C or D/C. Average Household Energy Costs is 2.4 per Year..
  • EXCELLENT AND SAFE LIGHTING OUTPUT: High Quality Eco-Halogen. Narrow 38 degree Beam Angle. 2700K Warm White / Soft White (Yellowish), CRI>99, No....
  • MANY LIGHTING APPLICATIONS: Often used for Indoor and Outdoor Accent Lighting, Track Lighting, Landscape Lighting, Desk and Floor Lamps, Fiber Optics....
  • DURABLE AND STANDARD SIZE: Glass Body with Glass Cover. Diameter: 2 inch (5cm), Length: 1.75 inch (4.5cm), Shape: MR 16 Reflector, Base: GU5.3 Bipin 2....
Check Stock

ITT CANNON CIET-20-HD INSERTION/EXTRACTION TOOL, D CONNECTOR

  • 003cb003ePrice For:003c/b003e Each 003cb003eNumber of Pieces003c/b003e: 1 003cb003eContact Type003c/b003e: Manual Lever 003cb003eMaterial003c/b003e: Plastic Tool Body 003cb003eIncludes003c/b003e: Integrated Flashlight, Batteries And Tool Pouch 003cb003eFeatures003c/b003e: Eliminates Disturbing Delicate Fiber Optic Cables 003cb003eApplication003c/b003e: Inserts And Removes SC, SC2, MU, LC, And MTRJ Connectors 003cb003eColor Code003c/b003e: Blue 003cb003eType003c/b003e: Fiber Optic 003cb003eLength (In.)003c/b003e: 8 003cb003eItem003c/b003e: Connector Insertion and Removal Tool.
  • 003cb003eCountry of Origin (subject to change)003c/b003e: United States.
Check Stock

CZH-LABS DIN Rail Mount DSUB DB50 Male/Female Header Interface Module D-SUB Breakout Board.

  • Standard DB50 Male/Female header connectors. Male header, female header and screw terminal 1:1:1 connects for per line..
  • Rated voltage: 60V. Rated current: 1A / per pin. Operating Temperature: -20ºC to 50ºC.
  • Terminal block: Pitch 3.81mm/0.15" miniaturization screw terminal block. Wire range - 26-16AWG. Strip length - 5mm. Screws - M2,steel,Cr3+ Zn plated.....
  • FR-4 fiber glass PCB, dual copper layers..
  • High quality fireproof nylon material DIN rail mount carrier (not China low quality carrier), can support width 35mm / 32mm / 15mm rail, and the....
Check Stock

Pall 64798 METRIGARD Glass Fiber Filter, 47mm Diameter, Typical Thickness 330 um, Pack of 100

  • Material: Ultrafine glass fiber with acrylic binder.
  • Air flow rate(0.7 bar(70 kPa,10 psi): 21 L/min/cm² and Maximum Operating Temperature (Metric): 135 °C.
Check Stock