Top Butyl Surrounds Reviews

2Way Custom Component Speaker System 6.5” 400 Watt Component with Electroplated Plastic Basket, Butyl Rubber Surround & 40 Oz Magnet Structure Wire Installation Hardware Set Included Pyle PLG6C

...pensates the undersized wire found in many of today’s cars. Includes grills, wires, and mounting hardware. Midrange tweeter helps to provide smooth & loud sound.
400watt 2way custom component system includes pair of woofers, tweeters, and crossovers.
6.5inch woofers with yellow poly injection cones and butyl rubber surrounds.
0.5inch silk dome tweeters with neodymium magnets and multiple mounting options.
Pair of passive crossover networks with 12 dB/octave slope.

360 MAXIMUM WATTAGE: Upgrade your vehicle’s speakers and blast your music with this two-way component speaker system’s maximum wattage of 360 watts! It also features butyl rubber surrounds, providing durability & deeper mid-bass impact.
FLUSH AND SURFACE MOUNT CAPABILITY: Whether you want this flushed or just on the surface of your system, you can mount it with this two-way system’s included mounting hardware. These speakers have a mounting depth of 2.32”.
ENSURES LOW DISTORTION: With this speaker system’s non-fatiguing butyl rubber surrounds combined with its 1” high-temperature ASV Voice coil,you can be sure that the sound quality it produces is still amazing even when you utilize its maximum wattage.
AMAZING SOUND QUALITY: With 2 included mid-woofers, 2 tweeters, and 2 crossover networks, this two-way component speaker system gives off a clear sound and emphasizes high frequencies.
SPEAKER DIMENSIONS: This two-way component speaker system is measured at 6.56” x 6.56” x 2.95” and 7.01” x 7.01” x 3.15” with the grilles attach and features a blue poly injection cone. It also includes a 10 ft. Power Cable.

Eight 3 inch High Energy Specialized High Efficiency Drivers with poly composite cones and Butyl rubber surrounds that produce more volume over....

MB Quart Formula 6.5 inch 3-way coaxial car speakers with aluminum dome tweeters and Butyl rubber surrounds..
1" Aluminum Dome Tweeter, Frequency: 40Hz - 22kHz, Impedance: 4 Ohms, Sensitivity: 88dB,.
Mounting Diameter Cutout: 5.59, Outside Diameter: 7.01, Mounting Depth: 2.13.

WIDESHERE creates a large "sweet spot" for all listeners, even from the smallest speakers.
Aluminum dome tweeters deliver high output, extended frequency response & natural music reproduction.
Butyl rubber surrounds provide durability & deeper mid-bass impact.
Textured ABS gasket assures a rigid linear seal to the mounting surface.
Pure copper voice coil creates a strong magnetic field with a very thin extrusion.

2.5-Way bass reflex system with 2 x 6.5” Woven Kevlar bass driver and a high performance 1” Anodized Aluminum tweeter with a linear response faceplate.
Butyl rubber surrounds and braided tinsel leads on all drivers.
Frequency response: 28Hz-23KHz+/- 3dB - Power handling: 225 watts.
Chrome plated steel spikes OR rubber feet for proper decoupling.
Magnetic Grilles featuring a custom honeycomb design with NO visible fasteners for durability & a flawless appearance.

Includes 2 KLH Concord Floorstanding Loudspeaker, 2.5-Way Bass Reflex with Woven Kevlar Drivers - European Walnut.
2.5-Way bass reflex system with 2 x 6.5” Woven Kevlar bass driver, and a high performance 1” Anodized Aluminum tweeter with a linear response faceplate..
Butyl rubber surrounds and braided tinsel leads on all drivers..
MDF construction featuring custom designed internal low resonance driver chambers and bracing optimized through finite element analysis..
Stamped steel driver baskets, featuring oversized magnets for superior control and output..

New Polymer Woofer Cones and Butyl Rubber Surrounds will not break down over time and will survive the rigors of harsh automotive environments.
High Temperature Copper Voice Coil (51 millimeter) and Polyamide Former withstands the most rigorous use while maintaining extremely low distortion for bass punch and output.
Available in Single and Dual Voice Coil Configurations allowing flexible wiring options.
Nickel Plated Heavy Duty Input Terminals accommodate speaker wire up to 8 AWG or twisted pairs of 12 AWG.
Available Matching Grilles complement the wheel spoke design.

Acoustic Audio CSic83 in ceiling speakers, recommended power is 20-350 watts per speaker, frequency response is 40hz-20 kHz, efficiency is 95dB, 8ohm, 3-way design and functionality.
8" Woofers, high rigidity polypropylene cones with progressive spiders, Butyl rubber Surrounds, poly mica midranges, 13mm soft dome tweeters, 3-way passive crossovers for greater fidelity.
Spring loaded speaker wire terminals, paintable grills and frames, cut out is 9.45.

Aluminum dome tweeters deliver great sound with increased reliability.
Butyl rubber surrounds provide durability and deeper mid-bass impact.
Lightweight thermal-formed polypropylene cones enable faster midrange response.
Cone/surround connection utilizes a high temp adhesive which assure the cone and surround do not separate in high power uses or extremes of weather.
Textured ABS gasket assures a rigid linear seal to the mounting surface.

Echo Series 6.5” 2-way full-range coaxial Speaker System. Peak Power - 200 Watts (Pair) | RMS Power - 100 Watts (Pair).
Lightweight thermal-formed Polypropylene cones provides high output and accurate frequency reproduction. Butyl rubber surrounds provide durability and deeper mid-bass impact.
Featuring a PEI dome tweeter with built-in crossover for smooth & fatigue free highs.
Ferrite magnet motor creates a strong magnetic field while remaining small enough to fit nearly every application.

2x KLH Albany ll 2-Way Bass-Reflex Bookshelf Loudspeaker (European Walnut) - 2x Grilles - 8x Self-Adhesive Rubber Feet - Manual - KLH 10 Year Limited....
2-Way bass-reflex loudspeaker system with 1 x 5.25" Woven Kevlar mid/bass driver, and a high performance 1" Anodized Aluminum tweeter with a linear....
Butyl rubber surrounds and braided tinsel leads on all drivers.
3/4" MDF construction featuring custom designed internal low resonance driver chambers and bracing optimized through finite element analysis.
Threaded mounting insert (1/4"-20) on back panel.