Lee Precision Breech Lock Challenger Kit (Red)
- Includes a set of 11 Auto-Prime Shell Holders.
- Kit includes the Breech Lock Challenger Press and one Breech lock quick change bushing.
- This kit is perfect for those who prefer to prime off the press.
Top Bushing Press Kit Reviews
Bushing Fix UP1KIT - Transmission Shift Cable Bushing Repair Kit
- Kit includes replacement bushing and application specific installation tools..
- Text and video instructions along with tech support make installation very easy..
- Used by many transmission and service professionalsDescriptionThe transmission shift cable linkage kit allows you to quickly and easily repair your shift selector cable by replacing the bushing or grommet. The patent pending coupling and custom molded replacement bushing ensure a quality repair with ease. A professional can perform this repair in under 10 minutes, average time for a non-professional is less than 25minutes. This bushing is made from a material that was designed to outlast the factory bushing and includes everything needed to install. The kit includes DIY instructions, custom molded bushing, and patent pending installation tools. Works in 4T40-E, 4T45-E, and 4T65-E transmissions. This kit fits the following vehicles: Chevrolet Uplander.
Titan Complete Quick Hitch Bushing Kit for 3 Point Hitch Tractors Top Link and Lower Lift Pins
- QUICK HITCH BUSHING KIT: This 3Pt bushing kit allows you to adapt your implement to fit quick hitches. Simply slide the bushings onto your lower lift pins and top link pin to reduce and remove spacing for a better, more secure fit..
- MADE FROM COATED STEEL: Each bushing will be made from zinc coated steel. This coating prevents the steel from rust and corrosion, so you do not have to worry about the bushings breaking down over time..
- SIX TOP LINK PIN ADAPTERS: This Quick Hitch Bushing Kit will include 6 total top link adapters. These adapters range in length and thickness to allow you to convert category 0, category 1, and category 2 top link pins to better fit your quick hitch..
- EASY INSTALLATION: With this bushing kit, installation is a quick and easy. Slide the top link bushing over your top link pin and use the shoulder bushings on your lower lift pins. Secure the shoulder bushings using the included roll pins by hammering them into position..
Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4x4 Adapters, for Most 2WD and 4WD Cars and Light Trucks
- ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle..
- PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion..
- UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive (4WD) adapter that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles)..
- CONVENIENTLY ORGANIZED IN CUSTOM MOLDED CASE - Ball joint press / bushing/ removal tool kit is enclosed inside a heavy-duty 11” x 3” x 15” inch (2....
Orion Motor Tech OMT Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4x4 Adapters, for Most 2WD and 4WD Cars and Light Trucks
- 1.ESSENTIAL TOOL FOR BALL JOINT SERVICE - Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle..
- 2.PROFESSIONAL GRADE QUALITY AND DURABILITY - Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion..
- 3.UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES - Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive (4WD) adapter that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (compatible with Ford, GM, Dodge, IHC and Jeep vehicles)..
Penn State Industries PK4XSS 4-in-1 Multi-Function Pen Kit Starter Package Woodturning Project
- This is a woodturning project kit. Pen hardware and bushing set only. A LATHE IS NEEDED TO 'TURN' INTO FINISHED PENS. Blanks, drill bit, and all other turning tools and supplies are not included..
- Includes (3) 4-in-1 Multi-Function Pen Woodturning Kits. You will receive (1) of each in 24kt Gold (PK4X24), Chrome (PK4XCH), and Gun Metal (PK4XGM)..
- Also includes the bushing set (PKVESBU) needed to make the pens. Minimum blank size needed to turn is 3/4" x 3/4" x 2-1/4"..
- Features an 10mm single tube design, a gravity assisted mechanism, (3) mini ballpoint refills, and a .7mm lead refill. For the mini refills, you will receive (1) of each in black, blue, and red..
- Black, blue, red ballpoint pen and .7mm mechanical pencil all in one. Gravity assisted mechanism works like magic so you can easily choose your ballpoint ink or pencil. Just hold parallel to the floor, rotate the pen in your hand until the desired color is face up, and the press the click button. To retract and change refills, simply press the switch on the clip..
Danco, Inc. 89487 Lift and Turn Bath Trim Kit, 1-Pack, Oil Rubbed Bronze
- EASY BATHROOM FIXTURE UPGRADE: Oil rubbed bronze finish trim kit provides a stylish elegant look to your tub shower with easy DIY installation.
- UNIVERSAL FIT: Designed to fit bath tub drain brands. Designed to fit 1-7/8 inch drains WITH bushing. Threaded adapter bushing fits 1-1/2 inch and 1-3/8 inch drain shoe sizes..
- KIT INCLUDES: Stopper cartridge, overflow plate, a bath shoe, a plastic adapter bushing. Comes with adapter for use with 1- or 2-hole overflow plate..
- DURABLE LIFT AND TURN STYLE: Durable brass construction provides strength and durability for lift and turn style drain kit.
E-cowlboy T-0220-39 Master Bushing Driver Set for Chrysler GM Ford Transmissions Bushing Bearing Seal Installer Remover Tool Kit (39 PCS)
- 【Application】The custom bushing driver tool set is suitable for installing or removing wheel bearings, bushings, sealing rings and rubber. The tool is impact resistant and can be used with hydraulic presses and hammers..
- 【Interchangeable】All 50 discs of the bush bearing and seal driver kit are interchangeable with each other and you can get 2,450 different size variations for quick work..
- 【Quality Material】The bush removal puller bearing press tool is made of high-quality forged steel with a black anodized coating on the surface, effectively preventing rust and greatly extending the service life of the tool..
- 【Custom Tool】8-65mm & 74mm metric discs. Each disc is marked with a scale for easy identification and reference. All metric discs, shafts, Allen keys, and screws remove or install bushings that are flush with the housing, allowing you to build your own custom bushing driver so that you always have the correct size for job..
- 【Set Includes】The transmission wheel axle bearing seal installer kit includes: 48pcs*discs (18mm to 65mm with 1mm graduation) +1pc*disc (74mm) +1pc* handle/shaft +1pc*Allen wrench (3mm) +1pc*screw +1pc*storage box..
SHIGA Skateboard Longboard Replacement Bushings Conical Cushions - 92A Resiliency
- Keep your skateboard better and more comfortable.
- Are you still worried about the squeaking of skateboards? Our skateboard bushing has rebound, which brings you a quieter and smoother experience..
- The bushing kit consists of a tapered top bushing and a cylindrical bottom bushing..
Tiger Tool Pin and Bushing Starter Kit Without Hydraulic Cylinder for Commercial Trucks, for use with Class 6-8 Transportation Trucks and Equipment, 15099
- This Starter Kit allows you to use any one of the Pin & Bushing Adapters to service both rubber-isolated and threaded pins and bushings - all while the suspension remains on the vehicle. Please Note: The 15099 does not include any necessary Adapters required to operate, all adapters are sold separately..
- Application: Commonly found on class 6-8 transportation trucks and equipment. (For use with Kenworth, for use with Peterbilt, for use with Freightliner, for use with Mack, for use with Volvo, etc.).
- There is no need to handle or remove heavy suspension assemblies. The removal of the spring packs from the axle is no longer required and this kit has 20 tons of pulling power for efficient pin removal and installation..
- The 15099 Pin & Bushing Starter Kit, with one or more adapters, eliminates time-consuming, labor-intensive and costly processes.
- technicians are no longer required to remove the suspension, haul it to the shop press or reassemble it to the vehicle. This system reduces shop time by as much as 70%! With more than 20 different adapter kits to choose from, and new ones being developed all the time, there sim....
Dorman 14104 Shift Cable Bushing Kit Compatible with Select Models (OE FIX)
- Convenient solution - this shift cable bushing kit directly replaces a broken bushing and eliminates the need to replace the entire cable assembly.
- Save time and money - save the expense and significant installation time of replacing an entire cable assembly.
- Ensure fit - this bushing kit is vehicle-specific and precision-engineered for specified General Motors and Chrysler models and years.
- Trustworthy quality - designed in the United States and backed by more than a century of automotive aftermarket excellence.
- Ensure fit - to make sure this part fits your exact vehicle, input your make, model and trim level into the garage tool.
E-cowlboy T-0220-700R4 Bushing Seal Installer Remover Tool Kit Driver Kit/Tool for GM 700-R4 4L60 4L60E 4L65E Transmission (13pc)
- COMPATIBILITY -- This 13 piece bushing driver kit is design to help PROPERLY rebuild for the 700R4 (700-R4) (4L60) (4L60E) (4L65E) transmissions..
- SUPERIOR QUALITY – Made of high quality solid steel and manufactured to meet the OEM specifications and performance, resisting rust and corrsion, ensures an unparalleled long lifespan..
- EXCELLENT DESIGN -- Comparable to Atec Trans-Tool K&K OTC Kent-Moore SPX T-0220, T-0220-700R4, SKU311. Bushing driver handle included mounting board easily mounts to wall for easy access!.
- KIT CONTENT -- Includes 12 Bushing Drivers (#61-71) and one Driver Handle, which are all placed in a black blow mold case (13-in-1) for easy storage and transportation. With this case, job would be done quickly..
- 100% SATISFACTION GUARANTEE -- If you're not 100% satisfied with our Bushing Driver Kit, simply return it for a full refund in 30 days, Premium Support & 12 Months Warranty..
Skateboard Longboard Truck Replacement Bushings 4-Pack (for 2 Trucks) - Many Colors and Durometers (88A Blue)
- These premium USA made bushings will keep your board riding nice and smooth and fit most skateboard trucks.
- Softer bushings (88A-94A) are used for lighter riders or riders who like loose trucks.
- Harder bushings (95A-99A) are for riders who want really stiff trucks for a stable ride.
- This bushing kit features a conical top bushing and a cylindrical bottom bushing.
- Package includes a set of 2 top bushings and 2 bottom bushings, which is enough to outfit your entire skateboard (kit includes bushings for 2 trucks).