Top Bullet Piercing Valve For Refrigerator Reviews

R134a Refrigerant Recharge Hose Kit-A/C Freon Charging Hose Set, with BPV-31 Bullet Piercing Tap Valve, AC Retrofit Valve, R134a Self Sealing Adapter, for Home/Car A/C Refrigerant System

  • ...for r134/r12/r22 types freon, piercing r134a can tap to connect puncture r134a refrigerant cans male mouth, r134a service quick coupler port to connect car ac r134a service male port. Directly used for car r134a ac refrigerant system.
  • 【AC Retrofit Valve】The r134a refrigerant charge hose also can be used for home refrigerator ac refrigerant system through equiped with this ac retrofit valve. 【BPV-31 Bullet Piercing Tap Valve】The bpv31 piercing valve is compatible with 1/4inch, 5/16inch, 3/8inch outside diameter pipes. Our bullet piercing tap valve can replace the part model of AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31.
  • 【Widely Compitable】The r134A ac refrigerant charge hose kit can be compitable with not only home refrigerator ac system but also car r134a ac refrigerant system.
Check Stock

BPV31 Piercing Valve for Bullet with R134a Refrigerant Charging Hose,Refrigerant Can Tap with Gauge, R134a can to R-12/R-22 port

  • BPV31 Piercing Valve for Bullet with R134a recharge hose with Gauge.Make sure to select the proper adapters for the tube od (3 options with kit)..
  • R134a recharge hose with gauge: 19" hose with R-134a can tap vlve to R-12/R-22 service port connection,1/4" end fits R12, 22, 502 fittings.This is simple to add 134a refrigerant to a sealed system when there is no suction line port..
  • BPV31 Piercing Valve compatible with Bullet: replaces for HVAC System: 3-In-1 Line Tap Piercing Valve for Bullet.
  • 3-In-1 Line Tap Piercing Valve fits 3 sizes of tubing: 1/4", 5/16" and 3/8". The valve is not created or sold by Bullet..
  • The hose is made of corrosion-resistant brass, won't wear out or rust over time. Our new BPV31 valve with rubber gasket to prevent leaking. Our replacement hose kit has been well-tested by the manufacturer..
  • Inexpensive and easy repair to bring your refrigerator back to new performance. With the system running and low on refrigerant the gauge should be in vacuum indicating a low charge. If this is the case open the valve on the can end of charging hose and begin adding 134a..
Check Stock

Boltigen A/C R134A Refrigerator Freon Recharge Kit with Bullet Piercing Valves, Refrigerant Charging Hose with Gauge, Piercing and Self-Sealing R134a Can Tap Valve, Refrigerant Tank Adapters (Type 1)

  • ...stant metal that won’ t wear out or rust over time..
  • 【Refrigerant Adapter】6014 vacuum pump adapter 1/4 Flare Female to 1/2 Male, 6015 R134A refrigerant tank adapter 1/2 Female to 1/4 Male Flare, R134A low side quick coupler, suitable for charging and service tools..
  • 【Package Included】With 1pc 55’’ r134a refrigerator freon recharge, 1pc R134A self sealing can tap, 1pc R134a non self sealing can tap, 1pc R134A low side quick coupler, 1pc 6014 and 6015 R134A convert refrigerant tank adapter, 2pc bullet piercing tap valves, 1 pc valve core remover..
Check Stock

FANOVO R134A A/C Refrigerant Freon Charge Hose with Gauge Set BPV31 Bullet Piercing Tap Valve Kits R134a Can to R12/R22 Port AC 1/2 Replace Universal Retrofit Valve Kit for AC/HVAC System (Gauge A)

  • ...h quality metal with great rust-resistant and anti-leaking performance. The hose is made of rubber,good pressure resistance, safe to use.both of the kit are made of corrosion-resistant metal that won't wear out or rust over time, and anti-leaking design that will be safer for you.
  • BULLET PIERCING VALVE KITS:BPV-31 Refrigerator Tap Valve Compatible with 1/4 Inch, 5/16 Inch, 3/8 Inch Outside Diameter Pipes, Replace for AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31,A practical kit and convenient for you to use,Each kit including 1 piercing valve, 1 hex key, 2 adapters.
  • AC U CHARGE HOSE: R134A charging hose uses rubber nylon resin material hoses, featured with anti-corrosion, low fluid resistance, high bearing pressure, ensure durability and good air sealing. Max working pressure is 500PSI and burst pressure is up to 350PSI. Total length is 19", ideal for easy to reach AC suction service port, for example the AC connector is right on top of your engine compartment.
  • EASY TO INSTALL: you just need to install bullet piercing tap valve by the hex key in the package, the installation process will not take up too much space, easy and convenient, using bullet piercing tap valve can effectively avoid accidental discharge of refrigerant.
Check Stock

Yaegoo R134A Charging Hose to Refrigerator with Gauge, AC Refrigerant Recharge Hose Kit Piercing Tap Valve Kit Connect Can of R134a, R12/R22 Refrigerant Port

  • 【High Quality】 Made of sturdy and corrosion-resistant metal it is rust-proof and durable and can be used for a long time, a high quality replacement part.
  • The freon charging hose adopted quality rubber material, high pressure resistance, reliable and safety..
  • 【R134A Charging Hose】 16inch hose with R-134a Can to R-12/R-22 service port connection, for home use refrigerator, A/C system adding refrigerant. Come with gauge for easily viewing during use, and the gauge has scale readings for R134, R12, & R22..
  • 【Piercing Valve】Bullet Piercing Tap Valve Kits Compatible with 1/4 Inch, 5/16 Inch, 3/8 Inch Outside Diameter Pipes, include: 1 valve ,1 Hex Key, 2 Adapters.
  • 【Easy To Use】You only need a hex key wrench (included) to install this part.
  • Its compact design only requires 2 inch clearance area for installation and use..
  • 【Package Included】1 Pcs R134a Charging Hose With Gauge, 1 Set R12 R22 to R134a Conversion Kit, 1 Pack Bullet Piercing Tap Valve Kits (Each kit including 1 piercing valve, 1 hex key, 2 adapters)..
Check Stock

Lichamp Refrigerator Freon Recharge Kit R134a R12 R22 R502, AC Charge Hose with Gauge and Bullet Piercing Tap Valve Kit, A201

  • 1. Efficient automotive refrigerator recharge kit for automotive A/C system with R-134a R-12 R-22 and R-502 types freon..
  • 2. Extra large and colored dials with fahrenheit scale is easy to read, gauge rated 250psi (blue) max pressure, extra long 5FT hose rated 4000 psi burst pressure and 800 psi max working pressure..
  • 3. Three can taps were equipped with piercing and self sealing style bottle which help to compatible with most can valves..
  • 4. Flexible bullet piercing valve with 1/4 inch fitting will compatible with 1/4 inch, 5/16 inch and 3/8 inch outside diameter pipes..
  • 5. Come with every thing you need for a efficiently ac charging work, package include: 1x low pressure gauge and 5FT hose, 2x suction side coupler, 1x piercing can tap, 2x self sealing can tap, 1x bullet piercing valve with L key..
Check Stock

A/C Retrofit Valve Kit-Refrigerant Retrofit Valve Set, with R12 to R134A Low Side Adapter, BPV31 Bullet Piercing Valve, for HVAC Refrigerant System R12 R22 R502 R134A (2)

  • 【A/C Retrofit Valve Kit】The a/c recharge valve kit includes:1 pieces r22 to r134a low side adapters with dust cap, 1 pack BPV31 bullet piercing tap valve (with 1 piercing valve, 1 hex key, 2 adapters).
  • 【R12 to R134A Retrofit Conversion Adapter】The ac retrofit valve with blue dust cap with 7/16” low side port can convert from R12, R22, R502 to R134a.
  • 【BPV-31 Bullet Piercing Tap Valve】The bpv31 piercing valve is compatible with 1/4inch, 5/16inch, 3/8inch outside diameter pipes. And the bullet piercing tap valve can replace the part model of AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31.
  • 【Premium Material】The r12 to r134a retrofit conversion fitting is made of premium brass and the BPV-31 bullet piercing tap valve is made of zinc alloy, which make the retrofit valve kit durable for long-time use to meet your daily repair work need.
  • 【Wide Application】The a/c recharge valve kit usually used for automotive or home air conditioning refrigerant systems. Suit for vehicles pre-1994, comes with R-134a refill fittings.
Check Stock

FANOVO R134A Refrigerator Freon Recharge Hose Kit, R134A AC Refrigerant Charging Hose Gauge, Bullet Piercing Valve Hose Refrigerant Can Tap, R134a Self-Sealing Adapter for Home AC Refrigerant System

  • ...uality metal with great rust-resistant and anti-leaking performance. The hose is made of rubber,good pressure resistance, safe to use.both of the kit are made of corrosion-resistant metal that won't wear out or rust over time, and anti-leaking design that will be safer for you.
  • 【BULLET PIERCING VALVE KITS】BPV-31 Refrigerator Tap Valve Compatible with 1/4 Inch, 5/16 Inch, 3/8 Inch Outside Diameter Pipes, Replace for AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31,A practical kit and convenient for you to use,Each kit including 1 piercing valve, 1 hex key, 2 adapters.
  • 【RH R134a Self-Sealing Adapter】Through the r134a self-sealing adapter, the r134a can tap off the refrigerator charging hose can compatible with r134a self-sealing cans. Male to connect the r134a can tap, the female to connect self-sealing cans..
  • 【REFRIGERATOR FREON RECHARGE HOSE WITH GUAGE】One side of the refrigerant charging hose is piercing r134a can tap to directly connect puncture refrigerant cans, the other side is 1/4 SAE female port to connect refrigerator male port. And the colored dials with Fahrenheit gauge has scale readings for R134/R12/R22 as the gauge show.
  • 【WIDELY APPLICATION】This recharge refrigerator kit usually used for home air condition refrigerant....
Check Stock

Lichamp A/C R134A Refrigerator Freon Recharge Kit with Bullet Piercing Valve, Piercing and Self-Sealing Can Tap 134A

  • 1. Efficient automotive refrigerator recharge kit for automotive A/C system with R-134a R-12 R-22 types freon..
  • 2. Extra large and colored dials with celsius scale is easy to read, gauge rated 250psi (blue) max pressure, hose rated 3000 psi burst pressure and 600 psi max working pressure..
  • 3. Two can taps were equipped with piercing and self sealing style bottle which help to compatible with most can valves..
  • 4. Flexible bullet piercing valve with 1/4 inch fitting will compatible with 1/4 inch, 5/16 inch and 3/8 inch outside diameter pipes..
  • 5. Come with every thing you need for a efficiently ac charging work, package include: low pressure gauge, 5FT hose, suction side coupler, piercing can tap, self sealing can tap, 2 pieces bullet piercing valves with L keys..
Check Stock

Refrigerator Freon Recharge Kit, AC Recharge Kit, R134a/R-12/R-22 Refrigerant Charging Hose with Gauge, Include BPV31 Bullet Piercing Tap Valve Can Top for Home AC Refrigerant System

  • 【PACKAGE INCLUDE】: R134a charging hose (with Gauge ) + BPV31 Piercing Valve for Bullet..
  • 【R134A CHARGING KIT】: This item will not work with the New Style 134a cans. 9" hose with R-134a Can to R-12/R-22 service port connection, 1/4" end fits R12, 22, 502 fittings. And the gauge has scale readings for R134, R12, & 22..
  • 【BPV31 PIERCING VALVE】: Piercing valve compatible with Bullet BPV31,it's for HVAC System: 3-In-1 Line Tap Piercing Valve for Bullet.
  • 3-In-1 Line Tap Piercing Valve fits 3 different sizes of tubing: 1/4", 5/16" and 3/8". The product is not sponsored or endorsed by Bullet.
  • 【PREMIUM QUALITY】: The replacement part made of corrosion resistant metal and well-tested by the manufacturer..
  • 【MONEY-BACK GUARANTEE】: For any reason you're not satisfied, please contact us and we'll provide you a new replacement or full refund..
Check Stock

2 Pack BPV31 Bullet Piercing Tap Valve Kits Compatible with 1/4, 5/16, 3/8 Inch Outer Diameter Pipes and R134A Air Conditioning Refrigerant Charging Hose with Gauge, Connect to R12/ R22 Port Only

  • Sturdy material: made of corrosion-resistant metal, won’t wear out or rust over time, a convenient replacement part for you to use.
  • The hose adopts quality rubber material, good pressure resistance and reliable.
  • R22 R12 charging hose: 19 inch in length, only can be applied with home refrigerator adding refrigerant, come with gauge for easily viewing during use, connect to the R-12/ R-22 service port for easy conversion.
  • It fits only those cans with the thread of 1/2 inch.
  • BPV-31 bullet piercing tap valve: replace part No.: AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31, also compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes.
  • Package includes: 2 packs BPV-31 bullet piercing tap valve kits (each kit including 1 x piercing valve, 1 x hex key and 2 x adapters) and 1 piece R22 R12 charging hose with gauge, 3 pieces in total.
  • Easy to use: you only need a hex key wrench (included) to install this part.
  • Its compact design only requires 2 inch clearance area for installation and use.This system refrigerant charging pipe with built-in safety valve to prevent accidental venting of refrigerant.
Check Stock

3 Pieces Set A/C R134A Refrigerant Charging Hose R134A Charging Hose Quick Couple, 1/2 in Male 1/4 in SAE Female Can Tap Valve, BPV31 Bullet Piercing Tap Valve Compatible with GPV14 GPV31 GPV38 GPV56

  • Package information: 3 pieces set in total, come with 1 piece R134A charging hose with gauge and 2 pieces BPV31 bullet piercing tap valve kit, each kit includes 1 piece piercing valve, 1 piece hex key and 2 pieces adapters.
  • R134A refrigerant charging hose: the length of charging hose is approx. 59 inch/ 149.8 cm, charging hose comes with pressure gauge for easily viewing during use, pressure gauge scale is 0 – 200 PSI, the 1/2 inch end fits R12, R22, R502 fittings,the R134a can tap is only suitable for R134A refrigerant of vehicle or home air-conditioning.
  • BPV31 bullet piercing tap valve: it can replace part model of AP4502525, BPV31D, GPV14, GPV31, GPV38, GPV56, MPV31, it is compatible with 1/4 inch, 5/16 inch, 3/8 inch outside diameter pipes.
  • About material: the bullet piercing tap valve is made of corrosion-resistant metal mainly, not easily worn out or rust, the refrigerant charging hose is made of rubber material mainly, it is resistant to high pressure.
  • Easy to install: you just need to install bullet piercing tap valve by the hex key in the package, the installation process will not take up too much space, easy and convenient, using bullet piercing tap valve can effectively avoid accidental discharge of refrigerant.
Check Stock

Trounistro 6 Pack BPV-31 Bullet Piercing Valve Line Tap Valve Kits Adjustable Valve for Air Conditioners HVAC 1/4 5/16 3/8 Tubing

  • Package include: you will get 6 packs BPV-31 bullet piercing tap valve kits.
  • Each kit including 1 piercing valve, 2 adapters, 1 hex key, enough....
  • Fits 3 size: for bpv31 bullet piercing valve 3 in 1 access for air conditioners HVAC, these bullet piercing valves fit 1/4", 5/16" and 3/8" tubing,....
  • Quality material: made of zinc alloy, sturdy and corrosion-resistant, It is a high quality replacement part, and won' t wear out or rust over time.
  • Easy to use: use a hex key wrench to install this part, requires only 2" clearance for installation and operation.
  • Note: to clean the lines before piercing in order to prevent debris from getting into the refrigerant lines.
Check Stock