Top Bulkhead Locknut Fittings Reviews

4 Pack PVC Bulkhead for Rain Barrels 3/4" Male 1/2" Female, Winspeed Double Threaded Bulkhead Water Tank Connector with Thick Silicone Seal Water Tank PVC Connector Adapter for Pools, Aquariums, Tub

【Durable 3/4" Male 1/2" Female Bulkhead Fitting】Our bulkhead fitting is made of high-quality PVC, equipped with 2 rubber rings for better sealing, which is colorfast, has no crack, and no peel as well as lasts longer than ordinary plastic fittings..
【Efficient Water Tank Connector Fitting】The bulkhead fitting adapter is made of high-quality PVC, which is colorfast and durable. Bulkhead fitting comes with a silicone seal gasket for better sealing performance. Keep your bucket with fresh rainwater season after season and can also drain the bottom of the tank impurities..
【What You Get】4 pcs 3/4" male 1/2" female bulkhead fitting and 8 pcs thick silicone seal gaskets. It can be very convenient for your daily life. You can share these good tools with your family and friends.（Please confirm the size before ordering！）.
【Easy Installation】The compression bulkhead fittings are super easy to operate and quick to install, first drilling 25-26mm holes in the tank for installation, and assembling the bulkhead and hose adapter. It is suitable for household, commercial and industrial use..

Check Stock

Joywayus 1/4 NPT Female 1/2 Male Brass Bulkhead Fitting Bulk Head Pipe Fitting Bulkhead Tank Fitting Coupler

Gasket and nut for air tight seal through bulkhead..
Joywayus female coupler for connecting 1/4" NPT fittings through a bulkhead..
Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F)..
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
This bulkhead fitting is suitable for connecting brass, bronze, or iron hydraulic lines through a bulkhead..

Check Stock

Hourleey Brass Rain Barrel Quarter, Rain Barrel Spigot Kit 1/2 inch, Rain Barrel Quarter Turn Ball Valve Spigot with Bulkhead Fitting

High quality: Heavy-duty solid brass bulkhead fitting, screwed along the 1-1/8 inch internal thread all the way, with spigot installed at both ends. Heavy-duty 1-1/8 inches, no kinks, right-angle rotating solid brass ball valve..
Two installation methods: Front mounting and rear mounting of brass bulkhead fittings..
Applicable scenarios: Bulkhead fittings need to be installed with 1-inch diameter holes, suitable for the case where the wall thickness does not exceed 1.3 inches..
Tools required for installation: Electric drill, 1-1/8 inch hole saw, pipe wrench or adjustable wrench..
Intimate help: For helping you easily install the rain barrel quarter and effectively prevent leakage, we provide a gasket..

Check Stock

LIFEGARD Aquatics Standard Threaded Bulkhead Kit for Fish Aquariums – High-Impact Resistant PVC – Includes Bulkhead Fitting, Gasket, Lock Nut – Jet Black – 2 Inch

ELIMINATE AQUARIUM LEAKS: Eliminate the possibility of finding hidden cracks when filling aquariums with this double threaded bulkhead fitting kit from Lifegard Aquatics..
HIGH-IMPACT RESISTANT PVC BULKHEAD: Made with only the most durable and high-quality materials, this heavy wall bulkhead is molded with impact-resistant PVC and features a slip base..
JET BLACK BULKHEAD KIT: Properly attach plumbing to fish and coral aquariums with this bulkhead fitting kit that includes a jet black bulkhead fitting, gasket and lock nut..
MATCH ACRYLIC TANK BACKGROUNDS: Ensure plumbing is in place for your aquariums without distracting from the aesthetics with this Lifegard Aquatics double threaded bulkhead kit for fish aquariums and tanks..
YOUR GO-TO RESOURCE FOR AQUARIUM, POND & AQUACULTURE PRODUCTS: Lifegard Aquatics features an extensive line of high-quality aquaculture products that include fountains, pumps, bulkhead fittings and commercial aquatic and pond equipment. From crystal aquariums to full spectrum LED lighting, trust in Lifegard for all of your aquatic needs..

Check Stock

Minimprover 4PCS 1/4 ID Hose Barb Thru-Bulk Head Hex Union Brass Straight Fitting with Flat Washer Gasket Water/Fuel/Air

★ 【Material】: Solid Brass construction. Durable Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
★ 【SIZE】: 1/4" Hose Barb x 1/4" Hose Barb.Thru-Bulk Bulkhead Fittings is connect with 1/4" ID hose with the same size..
★ 【Introduction】: Smooth surface and inner wall, durable Light and Small. Exquisite craftsman makes it safe and reliable.Bulkhead union coupling for connecting two hoses with the same diameter in a straight run.Barbed fitting for a tight seal on hoses..
★ 【Applications】: The fittings are fixed with 2 Gaskets and 1 fixed six corner, 1 movable six corner nuts form bulkhead tank function.Wide range of use: suitable for applications in water,fuel,air and etc..
★ 【Package Include】: 4 Pack 1/4" to 1/4" hose barb.It comes with 1 year warranty..

Check Stock

Jevrench 3/4 Inch PVC Bulkhead Fitting, Durable Threaded Bulkhead Water Tank Connector for Rain Barrels, Aquariums, Water Tanks, Tubs, Pools (3/4 Inch, 1PCS)

☘️BULKHEAD FITTING SIZE: bulkhead fitting is 3/4 inch FHT（refers to The bulkhead female thread size）, connector size is 53x 47 mm/2.1 x 1.85 inch, The lock nut is reverse threaded with 4 mm thick silicone gasket that will adjust to the shape of the round barrel, the right size can meet most of your needs and they will work well..
☘️EASY TO INSTALL: The bulkhead fitting is easy to operate and quick to install, first drilling 1-1/2 inch holes in the tank for installation, assembling the bulkhead and hose adapter together, suitable for home, commercial and industrial use.
☘️STRONG AND DURABLE: The bulkhead fitting adapter is made of high quality PVC, which is colorfast and durable, and lasts longer than ordinary plastic fittings，and it comes with a clear silicone gasket for better sealing performance..
☘️ESSENTIAL TOOL: PVC Bulkhead Fitting fits most rain barrels, water tanks, ponds, or aquariums, it is durable and convenient..
☘️OUR SERVICE: We will always put customer satisfaction at the first. If there are any problems with our PVC bulkhead fitting, please contact us and we would be very happy to solve your problems..

Check Stock

TAISHER 2PCS Black PVC 1-1/2 Bulkhead Tank Connector Adapter Fitting with Gasket for Water Tank Rain barrels Aquariums Bathtubs and Sink

Product Type: Bulkhead Water Tank Connector, suitable for installation in water tanks, water towers, buckets, fish tanks, etc..
Product material: Made of PVC, strength, durable, will not fade, fall off and crack，These fittings are not allowed be installed for potable water use.
Sealing: Threaded connection and embedded gasket form a tight seal, not easy to slip and leak..
Easy to install: Can be installed in walls, tanks or panels. The bulkhead design makes it easy for accessories to pass through the holes..
[Please note] When purchasing pipe fittings, consider the application, as this will affect material type, shape, size, and required durability. Fittings are available threaded or unthreaded, in many shapes, styles, sizes, and schedules (pipe wall thickness).

Check Stock

Outus 3/4 Inch PVC Bulkhead Fitting and Garden Hose Adapter Kit for Rain Barrels Aquariums Water Tanks

Specifications: size is 3/4 inch, material is PVC, applicable models is universal for most rain barrels, water tanks, ponds, or aquariums.
Package include: garden hose kit includes 3/4 inch PVC bulkhead fitting and 3/4 inch PVC garden hose adapter for rain barrels, water tanks, or aquariums, they are good tools.
Durable: will not fade, crack or peel, durable and longer lasting PVC versus standard plastic bulkhead fittings.
Easy to install: drill 1-3/8 inch or 1-1/2 inch hole to install, assemble the bulkhead and hose adapter together, threaded from the front end, commercial and industrial use.
Function: locking nut is reversed threaded, the bulkhead fitting with 4 mm thick premium silicone seal gasket that will contour to the shape of the round barrels.

Check Stock

Beduan 1 FPT Bulkhead Water Tank Connector Stainless Steel Thru-bulk Fitting

1" Female bulkhead connector for water tank, water inlet and outlet, and self-made water storage barrels..
Bulkhead OD 41mm, suitable for about 42mm/1.65 inch ID hole..
Can be mounted in water tanks, water towers, water inlets and outlets, self-made water storage buckets, rain buckets, and can also be used in various pipes, hoses, pipe fittings or faucets. Bulkhead design to make the fitting easy through holes without leakage..
Made of stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability..
Includes a body, gasket, and locking nut..

Check Stock

2 Inch Bulkhead Fitting - Water Tank Connector Double Threaded PVC Bulkhead Adapter with Plugs, Thick Silicone Seal Gasket Bulkhead , Fit for Rain Barrels, Aquariums, Tubs, Pools (1, 2inch)

Size information:The size of the bulkhead fitting female thread size is 2 inch, equipped with 4 mm silicone gasket and 2 inch plug. please refer to our images for detailed size..
Premium Material: Water tank connector adapter fittings made of high quality PVC material have high pressure resistance and will not fall off and cracking. Thick silicone gasket prevent water from leakage, long-lasting use..
Easy to install: First drill 3 inch inch hole to install on the water tank, then assemble the PVC bulkhead and hose adaptor together. The bulkhead fitting is easy to operate..
Multi-functional Adapters: PVC Bulkhead Fitting applicable for rain barrels, water tanks, ponds, and aquariums. suitable for home, A great way to keep fresh rain water and quickly empty the rain barrel..
What you will get: you will get 1 pcs threaded bulkhead adapter and 1 pcs plug. If there are any problems with our PVC bulkhead fitting, please contact us and we would reply in 24 hours..

Check Stock

Outus PVC Bulkhead Fitting Water Tank Connector for Rain Barrels, Aquariums, Ponds or Water Tanks (2 Inches)

Product size: 2 inches PVC bulkhead fitting, measures approx. 52 mm x 108 mm.
Applicable models: universal for most rain barrels, water tanks, ponds, or aquariums.
Please refer to the picture for the detailed size, and please make sure your barrel fits our product before purchasing.
Function: locking nut is reversed threaded.
The bulkhead fitting with 6 mm thick silicon seal gasket that will contour to the shape of the round barrels.
Durable and longer lasting PVC versus standard plastic bulkhead fittings.
Easy to install: requires 3 inch hole saw to install.
Threaded from the front end, suitable for commercial and industrial use.
What you get: 1 piece oversized PVC bulkhead fitting in your package, efficient to use it on your water tank.

Check Stock

Banjo TF300 Polypropylene Bulkhead Tank Fitting 3 NPT Female

3" NPT female coupler for connecting NPT fittings through a bulkhead.
Washer and nut for air tight seal through bulkhead.
Operating temperature range of -20 to +150 degrees F.

Check Stock

2 Pack - 1\ Double Threaded/Threaded Bulkhead - AM Brand

Female coupler for connecting NPT fittings through a bulkhead.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Washer and nut for air tight seal through bulkhead.
Operating temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).

Check Stock