Top Built In Handshaking Reviews

Opto 22 SNAP-PAC-R2 - SNAP PAC R-series Rack-mounted Programmable Automation Controller, Analog/Digital/Serial I/O processing

  • Rack-mounted industrial controller with I/O processor included.
  • Two independent 10/100 Mbps Ethernet network interfaces.
  • One RS-232 port with handshaking, suitable for modem communication using PPP.
  • MicroSD card slot for removable data storage.
  • Simple digital functions (no high-speed digital).
  • Full-featured control and HMI software included with purchase.
Check Stock

Key Digital 4K HDR HDMI Extender Transmitter and Receiver Kit with 4K to 1080p Down Convert KD-EX18G

  • Key Features: HDMI Extension over CAT5e/6, HDMI pass-thru port for connecting two displays or surround receiver, optional 4K to 1080p down-convert for....
  • Supported Technology: 4K Resolution Support (signals up to 18Gbps bandwidth) , HDR10 (High Dynamic Range), HDCP 2.2, Deep Color Support, 10G....
  • Benefits: Signal Extension 4K/UHD: Up to 115ft using CAT5e/6 1080p: Up to 164ft, Full Buffer System, Hot Plug Detection Control, EDID Handshaking,....
  • Compatibility: Commonly used with consumer and professional HDMI sources and displays including 4K and 1080p TVs, monitors and projectors, cable and....
  • 3 year limited warranty included. USA based tech support, product design, and engineering..
Check Stock

C2G 03039 DB25 M/M Serial RS232 Null Modem Cable, Beige (6 Feet, 1.82 Meters)

  • 1.5ft female to female serial null modem cable (7 wire type and full handshaking) connects your computer to device with COM port RS-232 compatible interface.
  • Wired as a 9 pin serial port Null-Modem cord that 2-3, 4-6, 7-8 line are cross linked (TX,RX,RTS, CTS, DTR,DSR wires are connected).
  • standard shielded DE9 rs232 cable female to femalewith AL foil.
  • DB9 female to female connector on each end equipped with screws to ensure an easy and solid connection for stable serial cross data communication.
  • The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
  • 1.5 feet short null serial adapter f/f for hooking up PC laptop to some old RS232C equipment like scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipment.
Check Stock

DTECH DB9 RS232 Serial Cable Male to Female Extension Null Modem Cord Cross TX RX line for Data Communication (10 Feet, Black)

  • Simple 10ft null modem extension cable (3 wire type and no hardware handshaking) extends a COM port connection between computer and some old device with RS-232 compatible.
  • Wired as a 9 pin serial cable male to female port cord that 2-3 line are crosslinked (only TX/RX data and signal ground wires connected).
  • DB9 m/f adapter extender equipped with screws on each end to ensure an easy and solid connection for stable data communication.
  • The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
  • 10 feet long RS232C cable for hooking up RS232C equipment like scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipment.
Check Stock

DTECH DB9 RS232 Serial Cable Female to Female Null Modem Cord Cross TX RX line for Data Communication (5 Feet, Black)

  • Simple serial null modem cable (3 wire type and no hardware handshaking) extends a COM port connection between computer and some old device with RS-232 compatible.
  • Wired as a 9 pin serial port Null-Modem cord that 2-3 line are crosslinked (only TX/RX data and signal ground wires connected).
  • standard shielded DE9 female RS232 cable with AL foil.
  • DB9 female to female adapter extender equipped with screws on each end to ensure an easy and solid connection for stable serial cross data communication.
  • The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
  • 5 feet short null serial cord f/f for hooking up RS232C equipment like scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipment.
Check Stock

DTECH DB9 RS232 Serial Cable Male to Male Null Modem Cord Full Handshaking 7 Wire Crossover for Data Communication (1.5 Feet, Black)

  • 1.5ft serial null modem serial cable (7 wire type and full handshaking) connects your computer to device with COM port RS-232 compatible interface.
  • Wired as a 9 pin serial port Null-Modem cord that 2-3, 4-6, 7-8 line are cross linked (TX,RX,RTS, CTS, DTR,DSR wires are connected).
  • standard shielded DE9 male RS232 cable with AL foil.
  • DB9 male to male connector on each end equipped with screws to ensure an easy and solid connection for stable serial cross data communication.
  • The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
  • 1.5 feet short null serial adapter for hooking up PC laptop to some old RS232C equipment like scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipment.
Check Stock

DTECH DB9 RS232 Serial Cable Male to Female Extension Null Modem Cord Cross TX RX line for Data Communication (5 Feet, Black)

  • Simple Serial Null Modem extension cable (3 wire type and no hardware handshaking) extends a COM port connection between computer and some old device with RS-232 compatible.
  • (Not VGA-CABLE) Wired as a 9 pin serial port Null-Modem cord that 2-3 line are crosslinked (only TX/RX data and signal ground wires connected).
  • standard shielded rs232 extender cable with AL foil.
  • DB9 male to female crossover adapter extender equipped with screws on each end to ensure an easy and solid connection for stable data communication.
  • The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
  • 5 feet short DE9 serial extender cord m/f for hooking up RS232C equipment like scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipment.
Check Stock

DTECH DB9 RS232 Serial Cable Male to Female Null Modem Cord Full Handshaking 7 Wire Crossover for Data Communication (15 Feet, Black)

  • 15ft male to female serial null modem cable (7 wire type and full handshaking) connects your computer to device with COM port RS-232 compatible interface.
  • Wired as a 9 pin serial port Null-Modem cord that 2-3, 4-6, 7-8 line are cross linked (TX,RX,RTS, CTS, DTR,DSR wires are connected).
  • standard shielded DE9 rs232 cable male to female extender with AL foil.
  • DB9 female to male connector on each end equipped with screws to ensure an easy and solid extension connection for stable serial cross data communication.
  • The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
  • 15 feet long null serial adapter m/f for hooking up PC laptop to some old RS232C equipment like scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipment.
Check Stock

DTECH DB9 RS232 Serial Cable Male to Female Null Modem Cord Full Handshaking 7 Wire Crossover for Data Communication (1.5 Feet, Black)

  • 1.5ft male to female serial null modem cable (7 wire type and full handshaking) connects your computer to device with COM port RS-232 compatible interface.
  • Wired as a 9 pin serial port Null-Modem cord that 2-3, 4-6, 7-8 line are cross linked (TX,RX,RTS, CTS, DTR,DSR wires are connected).
  • standard shielded DE9 rs232 cable male to female with AL foil.
  • DB9 female to male connector on each end equipped with screws to ensure an easy and solid connection for stable data communication.
  • The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
  • 1.5 feet short null serial adapter m/f for hooking up PC laptop to some old RS232C equipment like PTZ, scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipment.
Check Stock

DTECH DB9 to DB9 RS232 Serial Cable Male to Male Null Modem Cord Cross TX RX line for Data Communication (5 Feet, Black)

  • (Not for computer monitor VGA-video connection) Simple serial null modem cable (3 wire type and no hardware handshaking) connects your computer to device with COM port RS-232 compatible interface.
  • Wired as a DE9 9 pin serial port Null-Modem cord that 2-3 line are crosslinked (only TX/RX data and signal ground wires connected).
  • standard shielded rs232 cord with AL foil.
  • DB9 male to male connector on each end equipped with screws to ensure an easy and solid connection for stable serial cross data communication.
  • The wires inside are of 30AWG gauge and easy to solder to, and they connect to the pins in the order of the standard wire color code.
  • 5 feet short serial adapter male to male for hooking up PC laptop to some old RS232C equipment like scanner, Modem, printer, plotter, camera, barcode / embroidery machine, touchscreen, microcontroller, factory test equipmentrs.
Check Stock

DLAB 8032210000 Sk-O180-E,Classic Orbital Shaker (Including of A Platform 18900185)

  • ...nts,acrylic paints,etc. Compatible with most bottles, lab tubes, and pots..
  • 【Excellent Mixing Capacity】This lab vortex shaker Orbital diameter is 6mm rather than common shaker 4.5mm, can mix a larger amount of liquid at one time. Our mix machine can fix full 50ml containers within 3 seconds. Save the headache of handshaking hundreds of bottles of paint..
  • 【2 Simple Operation Modes】The paint vortex mixer machine is simple to operate. Continuous Mode: plug it in, turn it on, then the mixing will stats immediately until you turn off the power. Touch Mode: simply push the tube into the top to start shaking, and shaking stops as soon as the tube is lifted. Mix more thoroughly in a shorter time. Easy to maintain and clean..
  • 【More Stable Vortex Paint Shaker】 Aluminum casting base with 4 suction cups on the bottom keep the machine firmly working on a table, reducing the surface vibration tremendously, even at 3000rpm.It can also avoid scratching the table..
  • 【Safer Laboratory Vortex Mixer】12v low voltage, to ensure laboratory safety, DC brushless motor, high efficiency, small wear, low failure rate. lifespan is about 6 times longer than a brushed motor. The power supply is certified by cTUVus..
Check Stock

15 Pieces Paper Trimmer Replacement Blades Paper Cutter Blades Refill Craft Paper Cutting Replacement Blades for A4 Paper Cutter

  • ...uantity: there are 15 pieces of paper cutter replacement blades in one pack, enough quantity for you to replace, and keep your trimming and cutting running smoothly.
  • Safe design: the replacement blade is hidden under the blade holder, which prevents us from hurting ourselves when using the blade.
  • Meanwhile, the handshaking place adopts an anti-skid design, so you can rest assured to use.
  • Compatible with 853A4 plastic base paper cutter, A3 can cut 42 cm plastic paper cutter, 856A4 white plastic base paper cutter.
  • Easy to use: it is convenient to change the cutting blade with one hand, just press gently to reach the desired state.
  • Our products may be similar to the appearance of your cutting, but please read the details and confirm the size before you buy them.
  • Wide applications: these paper trimmer blades can be applied to different papers such as printing paper, photo paper and coated paper, and are very convenient for manual projects.
  • You can make different shapes of papers by using them according to your preference.
  • Quality material: the paper trimmer blades refill is made of quality ABS plastic, featuring durable steel blades that can service you longer for lasting performance.
  • In addition, the easy handle design makes them easier to grasp.
Check Stock

6 Pieces Paper Cutter Replacement Blades Paper Trimmer Blades Refill Craft Paper Cutting Replacement Blades for A4 Paper Cutter (Orange)

  • ...sign makes them easier to grasp, compatible with 853A4 plastic base paper cutter, A3 can cut 42 cm plastic paper cutter, 856A4 white plastic base paper cutter.
  • Thoughtful design: the replacement blade is hidden under the blade holder, which prevents us from hurting ourselves when using the blade.
  • Meanwhile, the handshaking place adopts an anti-skid design, so you can rest assured to use.
  • Package includes: You will get 6 replacement blades for paper cutters in orange. There are sufficient numbers to meet your use and replacement, and keep your trimming and cutting smoothly..
  • Easy to use: it is convenient to change the cutting blade with one hand, just press gently to reach the desired state.
  • Our products may be similar to the appearance of your cutting, but please read the details and confirm the size before you buy them.
Check Stock