Top Build Surface Plate Reviews

Comgrow Magnetic 3D Printer Build Surface Ultra Flexible Removable Heated Bed Cover for Ender 3/Ender 3 pro/Ender 5 3D Printer 235X235MM

FUNCTIONALITY & COMPOSITION: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal. The product is....
ATTENTION BEFORE USE: Firstly, please make sure the bottom of the soft magnetic sticker (B Part)and the top layer (A Part)are firmly adsorbed before....
EASY MODEL REMOVAL: The 3D printing surface designed with model removal in mind.Remove the upper magnetic surface from the lower, bend the flexible....
SIMPLE INSTALLATION & UNIVERSAL: Place lower 3M adhesive surface on top of normal build plate.Works with all FDM printer models, and all heated and....
CUSTOMIZABLE & WIDE APPLICATION:The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer....

Check Stock

ONLTCO 12V Red Led Square Submersible Trailer Lights, Turn Signal License Brake Tail Light Kit for Under 80 Inch Boat Camper RV Trailers Shorelander Marine, IP68 Waterproof, DOT

...up and the lights works well. Water-proof IP68, Sealed & Waterproof assemblies, engraved panel makes LED condense, and the light brighter. Please make sure wiring connect correctly.
✅MATERIAL: Accessory Wires is 100% Copper Wires.
License Plate Bracket made from Polypropylene Plastic.
Trailer Lights’ tail light surface and turn signal light surface made from Polycarbonate Plastic with Reflective Function, it's safer to use in the dark. License Plate Light surface made from Acrylic Plastic,with crystal-like transparency, and the light is soft and clear.
and black shell is made from Polypropylene Plastic. Screws and nuts on the lights are made from 304 Stainless Steel.
✅ALL LED: The lights are all led, 12 LEDs in trailer light surface, 4 LEDs in license plate light surface, 1 LED in turn signal Light surface. Complies with DOT standards.
✅BRIGHTNESS: We improved these trailer lights, compared with the old vision, these trailer lights are brighter. Brighter lights are safer in any environment such as Sand, Water, Dirty, Snow and Dusty Place..

Check Stock

3D Printing Magnetic Plate Dual Sided Flex Steel Bed 235x235mm with PEI+Magnetic Surface Printing Hotbed Parts for Ender 3 Aquila Kobra Neptune 2 Ender 3 S1 Ender 3 V2

...s: Ender 3/Ender 3 V2/Ender 3 Pro/Ender 3 Neo/Ender 3 V2 Neo/Ender 3 S1/Ender 3 S1 Pro/Neptune 3/Kobra, or other hot bed size 235x235mm/9.2x9.2in model. Compatible with PLA/PETG/PEEK/ABS and any other filaments..
Excellent Adhesion & Removable - Upgrades magnetic build surface provides the best adhesion. Once the hotbed cools back to room temperature, lift off the mat and gently bend the magnetic surface, the base will release the model which can be easily removed by hand..
Easy to Install - The build surface adhesive comes with upper magnetic build surface and lower magnetic adhesive base. Place lower adhesive surface on top of normal build plate. High strength and reusable..
Note - If you have any question or need technical support about the product, Please press "Ask a question" through our storefron....

Check Stock

Official Creality Ender 3 Pro 3D Printer with Removable Build Surface Plate and Branded Power Supply, FDM 3D Printers for DIY Home and School Printing Size 8.66x8.66x9.84 inch

REMOVABLE BUILD SURFACE PLATE: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build surface. Easy to remove the printing models after cooling..
SAFE POWER SUPPLY: Ender 3 Pro comes with a branded power supply, protecting your printer from unexpected power surges, that can heat the hot bed to 110℃ in just 5 minutes..
RESUME PRINT FUNCTION: Ender 3 Pro can resume printing from the last recorded extruder position after suffering unexpected power outages..
SEMI-ASSEMBLED KIT: This easy-to-setup kit comes partially assembled, allowing you to learn about the basic construction of 3D printers as you finish putting it together. A fun STEM educational experience in mechanical engineering and electronics..
WHAT YOU GET: Ceality Ender 3 Pro 3D pinrter, lifetime technical assistance and 24 hours professional customer service..

Check Stock

Creality Original Ultra Removable Magnetic 3D Printer Build Surface Heated Bed Cover for Ender 3/Ender 3 Pro/Ender 3 V2/Ender 3 V2 Neo/Ender 3 Neo/Ender 3 S1/3 S1 Pro/Ender 5 Pro 3D Printer 235X235MM

...ain until they are completely adsorbed and will not separate. Secondly, after finding the correct magnetic direction, then you can stick the bottom part on the hot bed. Please pay attention to the direction before installation..
ALL NEW FUNCTIONALITY: Introducing the first ever removable, magnetically secured, build surface for hassle free model removal.It is recommended to heat the hot bed for 2-3 minutes before removing the model with the removal tools..
EASY MODEL REMOVAL: The first 3D printing surface designed with model removal in mind. This surface is easily removed, and flexible. Simply print on the surface, remove the upper magnetic surface from the lower, bend the flexible surface and watch the model fall right into your hands..
CUSTOMIZABLE: The flexible surface can easily be cut to any demensions making it perfect for all build sizes and all FDM printer models..
SIMPLE INSTALLATION & UNIVERSAL: Build surface comes with upper magnetic build surface and lower magnetic adhesive base. Place lower 3M adhesive surface on top of normal build plate.Works with all FDM printer models, and all heated and non-heated 3D printer beds..

Check Stock

Entina 2 Pack Flexible and Removable Magnetic Build Plates for Tina 2 3D Printer 110 X 120MM

【2 Pcs Build Plates for Tina 2】The size of build plate is 110x120mm. Suitable for Tina 2 3D printer. The smooth and flat surface is flexible and....
【Strong Adhesion】The adsorption force of the 2 pack build plates is strong, so that the prints can be sticked on the surface firmly. After....
【Flexible Removable Magnetic Bed】Separation type bending to take off the model. Do not need the removal tools and scraper to assist the model.....
User notes: Please do not remove the yellow sticker when printing, which will protect the printing platform from damage. (yellow sticker can be....

Check Stock

3D Magnetic Build Surface-3D Printer Hot Bed Sticker Build Surface Tape 220×220mm 8.6 ×8.6 ,310×310mm 12 ×12 for Creality CR-10 Ender 3 Anet A8

★STRONG MAGNETISM AND CUSTOMIZABLE:The 3D magnetic surface have strong magnetism and can easily be cut to any demensions making, it perfect for all....
★EASY TO USE :Simply stick the bottom sheet onto your build plate place, then place the top half on top of the magnetic lower and kept the corners....
★EASY TO REMOVE:Peel up the top sheet with finished prints, then flex the top sheet to make the model pop off from the build surface. Snap the top....
★ULTRA FLAT PLATE:3D magnetic buildsurface is ultra flat,it isn't raised in the center..
★SERVICE COMMITMENTS: We offer 90 Days Money Back Warranty. If you unsatisfied with the quality of our product, you can contact us with your....

Check Stock

PEI Sheet Magnetic Bed Flexible Spring Steel Platform with 3M Adhesive, 220x220mm（8.66 8.66inch) for Anet A8, A6, Robo R2, Wanhao Duplicator6, Duplicator i3 Monoprice Maker 3D Printers.

【Quality Materials】: The PEI magnetic build plate is 3-Layer Materials . The flexible spring steel platform in the middle, covered with smooth PEI surface on it, and authentic 3M Magnetic Adhesive at the bottom are stable and durable.The maximum temperature for printing is 130℃ on the bed. Don't worry about the prints curling with a 60℃ bed temperature..
【Proven Solution】: No glue, No tape, PEI printed bed with authentic 3M has strong adhesion.
No scraping, easy to remove the printed matter from the bed by bending. Through hundreds of experimental tests, repeated use is still as new..
【Reuse For Multiple Prints】: Prints easily moved if bend the Magnetic plate when the heated bed reaches room temperature. then just wipe the surface with isopropyl alcohol and it can be reused as new..
【Practical Features】: Flexible, removable, high strength and heat resistance, good adhesion to PLA and ABS,220x220mm PEI sheet size is suitable for Anet A8,Cocoon 3D Printer, Wanhao Duplicator i3 V1/ Plus Monoprice Maker and similar size 3D printers..
【 Notice】: There is a transparent protective film on the surface of the smooth PEI sheet spring steel build plate, which needs to be torn off before use. If there are bubbles on the film, it is not a....

Check Stock

FlashForge Finder 3D Printer with Cloud, Wi-Fi, USB for Education and Family Use (Yellow)

Slide-in build plate allows you to draw it out of the printer and then remove the finished 3D prints more easily. At the same time, it can minimize damages or offsets to the build plate..
The patented nozzle structure has been upgraded several times and the wire is more even and smooth, which all improve the surface quality of model and lower risks of extruder jams..
Finder features an intuitive calibration detection system to assist leveling. you’re well instructed with clear messages on the touchscreen display. And all of these make calibration much easier and more precise..
Out of box,lower energy.A fun STEM educational experience in mechanical engineering and electronics..
Flashforge 3d printer Finder,12 months warranty, lifetime technical assistance and 24 hours professional customer service..

Check Stock

Wisamic Borosilicate Glass Plate Bed 200x200x3mm for 3D Printers Prusa, Monoprice Maker Select V2, etc

100% borosilicate glass. Borasolicate glass is rated for higher temperatures than normal sheet glass. Flat, heat resistant plate. Does not warp during long term use..
Conducts heat evenly across the build surface to ensure consistent temperature throughout the build surface..
High binding power when heating. Easy to separate the plastic parts when cooling..
Get you out of the trouble when plastic film decreased viscosity after a period of usage..
Specially designed to fit the 3D Printers Prusa, Monoprice Maker Select V2, etc.

Check Stock

Dremel BT40-01 Build Sheets for 3D40 3D Printer, Black, One Size

Durable- Each build sheet lasts up to 100 builds.
Convenient- Single sheet allows for quick application of a bubble-free surface.
Easy removal- No messy residue left behind.
Custom-size- Made to fit and protect your Dremel 3D40 Idea Builder build plate.
For use with Dremel 3D40 Idea Builder 3D Printer.

Check Stock

Gargle Water Salt Rinse Mouthwash 12 fl Oz Natural Remedy for Irritated Throat Soothe The Throat with Formula Free of Alcohol Drugs or Dyes Mix of USP-Grade Sodium Chloride and Purified Water

REMOVABLE BUILD SURFACE PLATE: Provide all-round protection to your 3D printer build plate and ensure consistent temperature throughout the build....
SAFE POWER SUPPLY: Ender 3 Pro comes with a branded power supply, protecting your printer from unexpected power surges, that can heat the hot bed to....
RESUME PRINT FUNCTION: Ender 3 Pro can resume printing from the last recorded extruder position after suffering unexpected power outages..
SEMI-ASSEMBLED KIT: This easy-to-setup kit comes partially assembled, allowing you to learn about the basic construction of 3D printers as you finish....
WHAT YOU GET: Ceality Ender 3 Pro 3D pinrter, lifetime technical assistance and 24 hours professional customer service..

Check Stock

3D Printer Glue Sticks, FENGWANGLI 4 Pieces Solid Adhesive for Hot Bed Print Filament PLA Glass ABS PETG CPE

▌Compatibility: 3D printer glue perfect for all 3D printer hot bed, include build surface sheet plate, aluminum and glass plate,PEI, 3D printer stickers, Kapton etc..
▌Easy to Use : You just need to twist 3D printer adhesive up, spread on an active printing area only, no need to cover the whole surface.
▌Easy to Clean: 3D printer glue stick with water soluble formula, you can just clean it with water after drying.
▌Multi-function: 3D printer bed adhesive not only for 3D Printing, but also for arts and crafts, school projects, and more.
▌Long-lasting: PLA glue Lasts for 100+ average prints.

Check Stock