Top Breadboard Kit Reviews

sb components Raspberry Pi Pico Board with Raspberry Pi Pico Breadboard Kit, Multi-Purpose Raspberry Pi Pico Breadboard Kit

  • Raspberry Pi Pico is Raspberry Pi's first microcontroller board, designed especially for physical computing.
  • It can be easily reprogrammed over USB from a Raspberry Pi or other computer using the C/C++ SDK or the official MicroPython port.
  • Raspberry Pi Pico Breadboard Kit is a multi-purpose Kit that consists of a “400 points half-size breadboard”.
  • Pico Breadboard Kit consists a programmable buzzer, 4 programmable LEDs, 4 pushbuttons, and dedicated 5V, 3v3, and GND pins at a single place.
  • Raspberry Pi Pico Breadboard Kit is specially made to work with the Raspberry Pi Pico Board.
Check Stock

YUEONEWIN 130 Pcs Breadboard Jumper Wires Kit 4pcs 400 & 830 Points Solderless PCB Breadboards and 126 Pcs Flexible Bread Board Jumper Wire Set for Arduino Prototyping Circuit DIY Electronic Project

  • 【Package Included】Solderless Breadboard Kit includes 2pcs 400-point breadboard, 2pcs 830-point breadboard and 126 pcs flexible breadboard jumpers,....
  • 【Material】400 and 830 connection point breadboards are made of high-quality ABS plastic panels and high-grade tin-plated phosphor bronze contacts,....
  • 【Design】There are metal strips under the breadboard board to connect with the holes on the top. Note that the top row of holes and the bottom row....
  • 【Wide Applications】This breadboard jumper kit can use 20-29 Awg (0.3-0.8mm) wires to interconnect any components, ideal for setting up test....
  • 【Service Guarantee】If you have any questions about these solderless breadboard kits, please feel free to contact us and we will reply within 24....
Check Stock

eBoot 3 Pieces 400-Point Solderless Circuit Breadboard with 65 Pieces M/M Flexible Breadboard Jumper Wires

  • Breadboard with jumper wire set: 3 pieces 400-point solderless circuit breadboard.
  • 65 Pieces male-male flexible breadboard jumper wires.
  • Easy to use: the breadboard is made of ABS plastic, each row and columns has corresponding letters and numbers, reduce the mistake handling.
  • Breadboard: plug and play, 400 tie points, peelable adhesive tape backing.
  • You had better clean the place you want to stick firstly, to make a good....
  • Breadboard jumper wires: good conductivity, it's hard to drop the head of the wire, can be applied repeatedly.
  • Compatible with electronic and electrical experiments.
  • The jumper wires are easy to insert into the breadboard.
Check Stock

DaFuRui Breadboard Jumper Wire Kit with 400-Point Breadboard、65pcs Multiple Sizes M/M Bread Board Jumper Wire、140 Pieces 2-125 mm U-Shape Preformed Jumper Wire Kit

  • ★【Excellent Quality】The kit is ideal for setting up a trial circuit, prototype or experimenting.A variety of colors, lengths, can be classified....
  • ★【Powerful Function】400 tie-points Solderless Breadboard, With self-adhesive tape on the back for easy bonding.65pcs 4.4in 6.3in 8.3in 10.3in....
  • ★【Easy to Install】The Breadboard Helper includes 2/5/7/10/12/15/17/20/22/25/50/75/100/125 MM 14 different lengths.Different colors: 140Pcs long....
  • ★【Widely Used】Can be used for wiring of breadboard circuits or where power or circuit connections.Proto-Typing Circuit，Electronic，Electrical....
  • ★【Package Content】1PCS 400 tie-points Solderless Breadboard，65PCS long and short solderless breadboard jumper kit，140Pcs 14 different....
Check Stock

Yahboom Breadboard Dupont Wire Multicolored Jumper Wires 40pin M-F, 40pin M-M, 40pin F-F, 3PCS 830 Point Solderless Prototype PCB Board for Arduino Raspberry Pi Electronic Project

  • 【Pure Copper Breadboard Jumper Wires】40 colored 1 row, 40 composed of 10 colors, can be disassembled for use, PVC material, high temperature resistant wire, more safe and durable.The two ends of the wire are designed with quick wiring ports, which can be used for circuit quickly without soldering..
  • 【120pcs 3 Types M-F M-M F-F】Separable multicolored (10 colors) softness ribbon cables, Each cable length: about 20cm /8-inch.
  • 【3PCS Spliceable Breadboards Kit 830 Point】165×55×10mm,630+200=830 holes，1 terminal strip: 630 jacks，2 distribution strips: 200 jacks，Matching jumper, wire diameter 0.8mm.
  • 【MB-102 ABS Recyclable Experimental Connection Board】White ABS Plastic Body with Black Printed Legend. Color Legend on Distribution Strips.With Self-Adhesive Tape on the Back, Easy to Stick on the Arduino Prototype Shield..
  • 【Application】Good for A-rduino Breadboard Jumper Wires kit Project and other Electrical DIY kits.DIY experiment / Electronic projects / Breadboard / PC motherboard / PCB project.
Check Stock

AUSTOR 840 Pieces Preformed Breadboard Jumper Wire Kit 14 Lengths Assorted Jumper Wire for Breadboard Prototyping Solder Circuits

  • Package includes: contains 840 pieces U shape preformed breadboard jumper wire kit, 14 lengths, 60 pieces per size.
  • Wire Length: 2 mm, 5 mm, 7 mm, 10 mm, 12 mm, 15 mm, 17 mm, 20 mm, 22 mm, 25 mm, 50 mm, 75 mm, 100 mm, 125 mm.
  • Easy to use: each jumper has stripped ends and preformed right-angled leads for easy insertion into your breadboard.
  • Wide Application: these breadboards wires are ideal for use with any breadboard, prototyping, prototype circuits, LED strip, test circuits and etc..
  • Note: the breadboard wire is a little soft that convenient for changing its shape to do connect test.
  • if you find that it can't be inserted, please check whether the cable in the pin hole of a breadboard is in good condition or not.
Check Stock

SIM&NAT 12inch / 30cm 40 Pin Male to Female Dupont Wire, 40 Pin Male to Male, 40 Pin Female to Female Breadboard Jumper wire Ribbon Cables kit for Arduino Raspberry Pi 2 / 3 (120 PCS)

  • The pitch of each end of the wire is 0.1 inch (2.54mm).
  • 40 pin jumper Wire are easy to separate from the ribbon.
  • Suitable for Arduino breadboard kit project, PCB project, PC motherboard, DIY experiment, 3D printer and etc..
  • Package content: 1 * 40 pin male to female jumper wires, 1 * 40 pin male to male cable and 1 * 40-pin female to female cable (total 120pcs)Description.
  • The wires are easy to peel apart and great for making good looking prototypes.
  • Work on a Raspberry pi breadboard projects, Raspberry pi robot build, Breadboard prototyping, Arduino and ky-040 rotary encoders..
  • Insert onto the SW LED pin on the typical desktop computer mother board..
  • Test bread boarding projects or for any breadboard experimenter..
  • 1 * 11.8 inch 40 pin male to male Breadboard Jumper Wires.
  • 1 * 11.8 inch 40 pin female to female Breadboard Jumper Wires.
  • 1 * 11.8 inch 40 pin male to female Breadboard Jumper Wires.
Check Stock

Protoboard Computing

  • BOJACK high quality Solderless Breadboard Assortment Kit.
  • Breadboard is a solderless device for temporary prototype with electronics and test circuit designs. Most electronic components in electronic circuits can be interconnected by inserting their leads or terminals into the holes and then making connections through wires where appropriate..
  • The breadboard has strips of metal underneath the board and connect the holes on the top of the board. Note that the top and bottom rows of holes are connected horizontally and split in the middle while the remaining holes are connected vertically..
  • The Breadboards Can be Spliced According to the Unit, the Structure is Clear in Color..
  • Material: ABS Plastic Panel, Tin Plated Phosphor Bronze Contact Sheet..
Check Stock

AUSTOR 560 Pieces Jumper Wire Kit 14 Lengths Assorted Preformed Breadboard Jumper Wire with Free Box

  • Parameters: U shape, 24 AWG, male to male, wire length 2 mm, 5 mm, 7 mm, 10 mm, 12 mm, 15 mm, 17 mm, 20 mm, 22 mm, 25 mm, 50 mm, 75 mm, 100 mm, 125 mm.
  • Wide applications: designed to work well with any breadboards or anywhere jumper wires are needed, perfect for breadboard projects.
  • Easy to use: all the colored jumper wire are pre-stripped and preformed right-angled, easy to insert it into breadboard.
  • Extra bonus: come with a free plastic box, keep your jumper wire kit organized, convenient for store and fetch.
  • Note: the breadboard wire is a little soft so that convenient for changing its shape to do connect test.
  • if you find that it can't be inserted, please check whether the cable in the pin hole of the breadboard is in good condition or not.
Check Stock

Testeronics 7 in 1 Breadboard Power Module Kit Compatible for Arduino/Raspberry Pi| 2PCS 3.3V/5V Power Supply Modules | 9V/1A Power Adaptor | 2PCS Solderless Breadboard 400 Points|65 PCS Jumper Wires

  • [Breadboard Power Module] Input voltage: 6.5-9V (DC Jack) or USB power supply.
  • [9V / 1A Power Adaptor] Output 9V / 1A DC, Input: 100~240V AC. US Plug 5.5mm x 2.5mm.
  • Compatible for Arduino UNO R3 Mega 2560 1280 ..
  • [400 Breadboard] 400 Points Solderless Breadboard, ABS Plastic Body, Fit for 21-26 AWG (0.4-0.7MM) wire. Compatible for Arduino Nano, ESP32, Raspberry Pi Pico..
  • [DC Power Splitter Cable] 1 Female to 2 Male 5.5mm x 2.1mm DC Power Adapter Splitter Cable.
  • [65 Jumper Wires] 65 PCS 24AWG Breadboard Solid Multi colors pure Copper Jumper Wires Kit.
Check Stock

(4 Pcs) MCIGICM 400 Points Solderless Breadboard

  • 400 Points Solderless Breadboard with 2 Positive & Negative Power Lines on both ends..
  • White ABS Plastic Body with Black Printed Legend. Color Legend on Distribution Strips..
  • With Self-Adhesive Tape on the back allows to stick on the prototype shield..
  • Fit for 21-26 AWG (0.4-0.7MM) wire. Comparing with breadboards of high AWG wire, MCIGICM breadboards is of higher physical strength and lower resistance..
  • Good for Breadboard Jumper Wires kit Project and other Electrical DIY kits..
Check Stock

BOJACK 3 Values 130 Pcs Solderless Breadboard 4 Pcs 830 Tie Points & 400 Tie Points & 126 Pcs Flexible Breadboard Jumper Wires

  • BOJACK high quality Solderless Breadboard Assortment Kit.
  • Breadboard is a solderless device for temporary prototype with electronics and test circuit designs. Most electronic components in electronic circuits can be interconnected by inserting their leads or terminals into the holes and then making connections through wires where appropriate..
  • The breadboard has strips of metal underneath the board and connect the holes on the top of the board. Note that the top and bottom rows of holes are connected horizontally and split in the middle while the remaining holes are connected vertically..
  • The Breadboards Can be Spliced According to the Unit, the Structure is Clear in Color..
  • Material: ABS Plastic Panel, Tin Plated Phosphor Bronze Contact Sheet..
Check Stock

HiLetgo 3pcs 400 Ties Mini Solderless Breadboard Universal 400 Contacts Solderless Breadboard 400 Points Prototyping Shield for Electronics Testig DIY

  • 400 Points Breadboard with 2 Positive & Negative Power Lines on both ends.Perfect for Arduino Shield Prototyping and Testing..
  • Insertion Wire Size is 21 to 26 AWG, 0.016 to 0.028 inches diameter (0.4 to 0.7mm diameter),works with dupont jumper wires kit..
  • White ABS body with black printed legend. Color legend on distribution strips..
  • With self-adhesive tape on the back, make it easy to stick on the Arduino Prototype Shield..
  • Good kits for Arduino breadboard kit proto shield and DIY projects..
Check Stock