Top Brass Sanitary Pipe Fittings Reviews

CHARLOTTE PIPE 2 DWV P-Trap with Solvent Weld Joint DWV Drain Waste and Vent 1 Unit Piece

Black fittings used in sanitary drain, waste, and vent (DWV), sewer and storm.
For use where systems will not exceed 140° F.
MADE IN THE USA: For over a century, Charlotte Pipe has been manufacturing pipe and fittings, employing more than 1,400 loyal, hard-working Americans.....

Check Stock

EGSTAOR Bathroom Adjustable Wrench for Tight Spaces, 6-75mm Multifunction Aluminum Spanner for Plumbing Task Pipe Tube Nut Toilet Washbasin Sink Pool, 9-Inch (Silver)

⚙ 3-IN-1 ADJUSTABLE WRENCH -- ✔ Wide aluminum adjustable spanner wrench.
✔ The bottom of handle design for removing large convex cross screw.
✔ 2 extra blades fixed on jaw by screw nuts to scrape away stains on smooth surface, or cut soft plastic pipe..
⚙ LARGE OPENING FOR PLUMBING TASKS -- 6-75mm(0.25''-2.95'') wide jaw, adjusted quickly by smooth-going scroll wheel. Suitable for plumbing tasks in bathroom, toilet to tighten or disassemble sanitary ware, washbasin, pipe, plastic/brass nut, rounded fasteners..
⚙ EASY TO USE -- Detachable long jaw can be reversible to use the flat side, or the arc side epiuped with teeth for clamping tightly round tube nut. 9'' long adjustable wrench fits for tight work space. The handle with square hole end, easy to grip and hang..
⚙ ALUMINUM ALLOY WRENCH -- Made of lightweight aluminum alloy, reduces damage on ornamental pipe and tube nuts effectively, great for light duty works. Non-slip, rust/corrosion resistant after the surface treatment..
⚙ WORRY-FREE PURCHASE -- We guarantee to provide 12 months after-sales service. Please note that our adjustable wrench is made of alumium alloy and designed for household pipe fittings, NOT for high torque jobs, or steel nuts/fasteners..

Check Stock

Supply Giant 3952x2 Flexible PVC Pipe Cap with Stainless Steel Clamps 3 inch Black (Pack of 2)

Black fittings used in sanitary drain, waste, and vent (DWV), sewer and storm.
For use where systems will not exceed 140° F.
MADE IN THE USA: For over a century, Charlotte Pipe has been manufacturing pipe and fittings, employing more than 1,400 loyal, hard-working Americans. All of our products are proudly made in the USA..

Check Stock

CHARLOTTE PIPE 3X3X2 DWV WYE REDUCING ALL HUB DWV (DRAIN, WASTE AND VENT) ( 1 Unit Piece )

Black fittings used in sanitary drain, waste, and vent (DWV), sewer and storm.
For use where systems will not exceed 140° F.
MADE IN THE USA: For over a century, Charlotte Pipe has been manufacturing pipe and fittings, employing more than 1,400 loyal, hard-working Americans. All of our products are proudly made in the USA..

Check Stock

CHARLOTTE PIPE 4 DWV P-Trap with Solvent Weld Joint DWV (Drain, Waste and Vent) (1 Unit Piece)

White fittings used in sanitary drain, waste, and vent (DWV), sewer and storm drainage applications.
For use where systems will not exceed 140° F.
MADE IN THE USA: For over a century, Charlotte Pipe has been manufacturing pipe and fittings, employing more than 1,400 loyal, hard-working Americans. All of our products are proudly made in the USA..

Check Stock

30 Pcs 1/2 Inch Brass PEX Fittings with 100 Half Clamp J Hook with Nail Black Pipe Supports PEX Mounting Bracket Coupler Crimp Fittings for PEX Tubing Fitting Connection (Elbow, Tee, Straight)

Extensive Usage: these PEX tubing clamps are suitable for copper crimping ring system, plastic or rubber hose, PEX crimping tool and brass crimping accessories, also nice for hot or cold water systems, nice combination to meet your needs in different applications.
Easy to Install: this brass PEX fittings kit can be installed without flame, flux or glue, which can help you save time and energy, simple and convenient to use, and can provide a nice using experience for you.
Size Details: the crimp PEX fittings are compatible with crimping or cinch type rings and connectors.
The adjustable size range of black pipe supports with nail is about 10-14 mm/ 0.39-0.55 inch, please choose the right size before ordering.
Solid and Sturdy: these PEX pipe fittings are made of quality brass, safe and stable, solid corrosion resistance, high temperature ductility, waterproof and oilproof, which can be applied for long time.
Nice Combination: you will receive 30 pieces of 1/2 inch brass PEX fittings, including 10 elbow, 10 tee and 10 straight coupler crimp fittings, 100 black half clamp j hook with nail, sufficient quantity can easily meet your daily use and replacement needs.

Check Stock

BELEY 1/2 Inch & 3/4 Inch Olive Remover Puller Tool Removal Tool Solid Brass Copper Pipes Fitting Compression Fittings Thread Tool Puller Metric Handle Nut

US 1/2 Inch & 3/4 Inch Ferrule Removal Tool: The olive puller is suitable for any solid brass pipe fittings with a diameter of 15mm and 22mm. Solid....
Main Function: The olive puller uses a compression fitting to lock the nut, and takes out the used or damaged olive from the copper pipe without....
High-Quality: The copper pipe fittings are made of solid brass. The high-quality brass makes the product sturdy and durable, with high strength, high....
Easy to Use: The olive removal tool can remove most olives and can also increase torque, which is appropriate for various tasks. And the operation is....
After Sales Service: We provide 7X24h service. If you have any questions about this brass tube, please feel free to reach us via email..

Check Stock

SharkBite 3/4 Inch Polybutylene Transition Coupling, Pack of 6, Push to Connect Brass Plumbing Fitting, PEX Pipe, Copper, CPVC, PE-RT, HDPE, U4016LF

SHARKBITE BRASS PUSH POLYBUTYLENE TRANSITION COUPLING: Polybutylene transition couplings are used to perfectly transition from a polybutylene pipe to another pipe.
remove using a disconnect clip or disconnect tongs.
COMPATIBILITY: Color-coordinated collars on the ends of the fittings identify which side goes with which pipe.
gray collar end works with polybutylene pipe.
tan collar end is compatible with PEX, CPVC, PE-RT, SDR-9 HDPE, and copper pipes.
EASY TO INSTALL: The SharkBite brass transition coupling features a push-to-connect mechanism for a watertight union, and allows for quick and easy installation, with no tools, crimping, glue, or soldering required.
PREFERRED BY THE PRO: SharkBite tools and fittings meet the same high standards for commercial and residential plumbing applications, combining durability and ease of use suitable for underground and behind-the-wall applications with no access panels.
SPECS: Made with DZR forged brass, this transition coupling can withstand 200 degrees F and 200 PSI.

Check Stock

Legines Brass Pipe Fitting Long Nipple, 1/8' NPT Male x 1/8' NPT Male Extender Straight Connector, 1-1/2'Length 1200psi (Pack of 5)

Long nipple for connecting two threaded pipes and extending pipe length.
1/8" Male National Pipe Taper (NPT) threads for connecting to 1/8" female threaded pipes.
Legines pipe fittings are made of CA360 or CA377 brass, not ordinary copper alloy, and meet SAE standard, have dryseal threads, forgings & extruded..
Operating pressure of our fittings is up to 1200psi, more higher than other general fittings. Temperatures range from -53 to 121 degrees C (-65 to 250 degrees F).
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories..

Check Stock

1.5\ Tri Clamp Ferrules, SS304 Long Weld Clamp Ferrule for Sanitary Fittings 2PCS

Made of 304 stainless steel, corrosion resistant ductility at high temperatures, and low magnetic permeability..
Fit for all other homebrew stuff sanitary fittings..

Check Stock

3/4 Inch Tee Fitting Compression Tee Fittings for 3/4 Inch Tubing System (2 pcs)

【Lead Free Material】PPSU is a durable plastic poly material, lead free and non-toxic. So PPSU is more eco-friendly than brass. These pex expansion fittings meet the standard of potable water grade. When the water flows through the poly pex fittings, it will not be polluted..
【Fully Equipped】Qty: 1/2 inch pex expansion elbows 10pcs + 1/2 inch pex expansion Tees 10pcs + 1/2 inch pex expansion couplings 10pcs + 1/2 inch pex expansion rings 70pcs | Connection pipe type: Pex A pipe only | Max temperature: 200F | Max operating pressure: 160psi.
【Professional Standards】Pex Expansion A Fittings are of high quality. All poly pex a fittings are manufactured according to ASTM F-1960, CSA B137.5 and qualified cUPC certification. Listed to NSF NSF/ANSI 61..
【Easy to Install】Use expansion tools and expansion rings to connect the expansion fittings to the PEX A pipe. The protruding stop part on the expansion pex fitting makes it clear whether it has been installed in place. NOTE: Expansion tool is not included in the package..
【Wide Usage】Plastic poly pex expansion fittings can be widely used in heating circulation system and domestic water. Due to its good corrosion resistance and heat resistance, it can have excellent performance even in a chemica....

Check Stock

Joywayus Brass Hose Fitting,90 Degree Elbow,3/8\ Barb x 3/8\ NPT Male Pipe Water/Fuel/Air (Pack of 2)

【Solid Brass】The hose barb fittings are made of solid brass, which is strong and not easily corroded, suitable for long time use..
【Package Include】3PCS 5/8"x5/8"x5/8" Brass 90°Included Angle Y Hose Barb Fittings..
【Heavy & Thick】Heavy Y shaped brass barbs and thickened wall, higher strength and very rugged..
【Solid Connection】The Y shaped hose barb fittings can be solid connected to the hose (Fit hose which ID of 16mm)..
【Note】Keep the water pipe incision flat. It is better to use with clamps (Not include). Tighten clamps as tightly as possible to prevent leakage..

Check Stock

DOT Brass Air Line Quick Connect Fittings Assortment, 34 Pcs DOT Push to Connect Air fittings 1/4" 3/8" 1/2" Air Fitting Kit with 1/4" Schrader Valve Air Line Fittings for Trucks or Industrial

【PREMIUM MATERIAL】：Our dot push to connect air fittings are made of high quality CA360 brass, meet D.O.T. FMVSS 571.106, SAE J1131 with corrosion resistance, high temperature ductility and low permeability. Long service time, air brake fitting assortment type: 1/4", 3/8", 1/2"..
【TYPICAL APPLICATION】：The dot air line quick connect fittings can be used with air suspension systems, copper tubing in air lines brake systems, perfect for truck /RV repair air line leak, also perfect for industrial workshops, daily garden or lawn mower repair, towing machine hose connection and so on..
【EASY TO INSTALL】：Pre applied red sealant for male thread for better sealing. All brass quick connect air fittings can be sealed by pushing the tube firmly into the fittings, simply depress button to remove tubing..
【MAX PRESSURE】：Working pressure from vacuum to 250 psi. Temperature Range: -40° F to +200° F（-40°C to +93°C）(Note: see tubing manufacturer's recommendations for pressure and temperature mutations).
【ALL IN ONE SET】: Unique DOT Air Brake fit....

Check Stock