Top Brass Pneumatic Valve Reviews

Beduan 3 Way Shut Off Ball Valve, 1/2\ Hose Barb 2 Switch Brass Y Shaped Valve

This fitting is made of brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability..
Package including 1pcs 1/2" male Y valve, 3pcs 1/2" femalex 1/2 barb, 3pcs hose clamps, Teflon Tape..
Barbed edges provide positive connection..
Y shaped 3-way shut off ball valve has 2 switchs which can control 2 channels respectively, and can also close one of them as a 2 way valve, whatever you want..
Can be used in pneumatic system. It is not lead free, so please do not use it on water lines..

Check Stock

KAST 10PCS Compressed Air Pneumatic Mufflers, 1/8\ Male Thread Sintered Bronze Exhaust Muffler Silencer Air Line Fitting (1/8\)

Product Name ：Pneumatic Brass Muffler 10PCS.
Maximum Pressure ：300PSI Maximum Temperature ：30℉ -300℉.
Application ：Steam Boilers, Fans, Heat Pipes,Cylinder, Valve, Reservoir, Air Tool,Compressed Air Pipeline, Etc..

Check Stock

Parker Hannifin DC604-4 Series DC604 External Seal Drain Cock, 1/4\ Male Pipe

Typical Application:Instrumentation, hydraulic and pneumatic systems.
Powermate tank Drain valve creates a snug fit to prevent unwanted air or water seepage Drain compressor regularly for optimal performance..
Size:3/8" NPT Male Brass body and steel handle..
Working Pressure Range :Maximum up to 150PSI..

Check Stock

Unicornioext 1/8in 1/4in 3/8in 1/2in NPT Female Equal Straight 304 Stainless Steel Needle Valve Water Gas Oil Flow Control

A Needle Valve Is Used Usually in Flow Metering Applications Where a Constant Calibrated or Low Flow Rate Should Be Maintained for Some Time. E.G., Idle Fuel Flow in A Carburetor. They Are Very Commonly Used to Provide Shutoff for A Pressure Gauge..
This Valve Features a Needle Shaped Handle Which Makes It Easy to Shut Off Even When the Pressures Are High..
Constructed Out of High-Quality Lead-Free Brass..
For Use on Portable Water, Instrumentation, Hydraulic and Pneumatic Systems. Not Intended for Natural Gas Or LPG..

Check Stock

Control Devices P2525-1WA Brass Ball Check Valve, 1/4\ NPT Female x NPT Male

Can be used as a tank check valve for small compressors or as a component in pneumatic circuits.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
Fluorocarbon O-rings for higher temperature and chemical resistance.
Female and male NPT threads for connecting pipes with different ends.
Maximum pressure rating of 250 psi and maximum working temperature of 250 degrees Fahrenheit.

Check Stock

Hromee 18 Pieces Air Coupler and Plug Kit 1/4-Inch NPT Air Hose Fittings and Compressor Accessories with Universal Quick Coupler Brass Ball Valve Swivel Air Plug and Tee Pipe Fitting

HEAVEY DUTY BALL VALVE - The ball valve is made of forged brass for corrosion resistance, ductility at high temperatures and low magnetic permeability. It has a plastic-covered lever handle for on/off manual control so can be used to give your tool full air flow to total shut-off. Designed for use on all pneumatic circuits and features a quick connect/disconnect positive seal..
TEE PIPE FITTING - The tee fitting is T-shaped and has three openings to connect and branch three pipes, two on the main run and one branch at a 90-degree angle from the middle of the tee. It has 2 x 1/4” female and 1 x 1/4” male for connecting pipes. Pipe fittings are components used for connecting, terminating, controlling flow, and changing the direction of piping in many different industries..
CONNECTORS & ADAPTORS - The kit includes 4 x MNPT Plugs, 4 x FNPT Plugs, 2 x FNPT Couplers, 2 x MNPT Swivel Plugs, 1 x MNPT Coupler, 1 x Male Coupling, 1 x Ball Valve, 1 x Tee Brass Fitting, 1 x Thread Seal Tape, 1 x Female Coupling. All packed in a durable clear storage case for easy organization, carrying and storage..

Check Stock

VEVOR Bag Air Jack 11000lbs Capacity Pneumatic Jack Quick Lift 5T & Mophorn Pneumatic Jack 3 Ton Triple Bag Air Jack Lifting Height Pneumatic Air Jack 6600LBS Capacity Extremely Fast Lifting Action

Product 1: Labor-Saving Jack: The pneumatic jack capacity: 11000 lbs/5T. Minimum height: 5.7"/ 145 mm. Maximum height: 15.75"/400 mm. It only takes 5 seconds to lift. Working Temp: -60℃~ 50 ℃. Air inlet: G1/4. Our triple bag jack is the easiest and fastest way to make the car lifted..
Product 1: Heavy Duty Construction: Our pneumatic jack is built with high-strength steel that makes the whole body sturdy and durable. The powder-coated steel frame and rubber match to reduce impact. Highly sealed airbags will not leak or be scratched. A larger stressed area fits on a soft and easy-collapsing place..
Product 1: Secure Usage: First, keep the red valve closed, open the green valve, and input the compressed air.
when inflating to the height, turn off the green valve. After use, open the red valve to bleed off air. The safety valve in the middle ensures the injected gas is not excessive to ensure the security of the use process..
Product 1: Space-saving Design: Carrying handle design fits the shape of the hand, so you can fully control the jack when you use it. And the whole structure is compact and easy to store. So you can take it outdoors conveniently..
Product 2: Labor-Saving Jack: Pneumatic jack capacity: 6600 lbs/3T. Minimum height: 5.3"/135 mm. Maxim....

Check Stock

Hromee 1/4 Inch Air Compressor Filter Regulator Combo Water Oil Separator with Pressure Gauge Manual Drain Ball Valve and Bracket AW2000-02

BRASS FILTER ELEMENT - Filtering moisture and fine particles to get clean and dry air which prevents damage to air tools, spray guns and pneumatic....
PRESSURE REGULATOR - With the adjustable pressure control knob, you can pull up and turn the black knob at the top of the regulator to set desired....
GAUGE&FILTER CUP - The pressure gauge is more accurate to the pressure induction and the metal shell is resistant corrosion. The dial scale has two....
EXTRA ACCESSORIES - The ball valve is made of forged brass for corrosion resistance, ductility at high temperatures and low magnetic permeability. It....
PIGGYBACK- Air pressure regulator combines the functions of both air filter and regulator. It is compact and much effective when space is constrained.....

Check Stock

DC 24V 1.5\/Φ38 Port Motorized Butterfly Valve, 304 Stainless Steel Tri Clamp GDAE10 for Food, Pharmaceutical, Beverage, Cosmetics, Sanitary 8W

【FOOD-GRADE 304 STAINLESS STEEL】 - The pneumatic butterfly valve comprises 304 stainless steel material, no odor, high strength, and good corrosion resistance. They are specially designed for long service life. There is a silicone ring inside to ensure the tightness so that the liquid is not easy to leak..
【HASSLE-FREE OPERATION】 - Convenient operation allows you rapid opening and closing, only to rotate 90° from fully open to fully closed. Control mode: single-acting, automatic return, You can perform local control and remote control, saving human resources and time to a large extent..
【ACCURATE PRODUCT PARAMETER】 - The outer diameter of the sanitary pneumatic valve is 2 in / 51 mm, the size of the ferrule is 2.5 in / 64 mm. Our butterfly valve adopts a disc-shaped butterfly plate, which can better control the flow of liquid..
【EXCELLENT & STABLE PERFORMANCE】 - Applicable temperature: ≤176 °F.
Environment temperature: 14 °F to 176 °F.
Sterilization temperature can reach to 392 °F. Air supply pressure: 5bar-8bar. Maximum pressure 1.6Mp. Our pneumatic butterfly valve is more adaptable than other models on the market..
【APPLICABLE MEDIUM】 - Our tri-clamp butterfly valve is simple in structure, compact in body, light in weight, an....

Check Stock

Piutouyar 3Pcs Air Pneumatic Mufflers 1/4\ Male Thread Hex Sintered Silencer Brass Exhaust Muffler Filter Air Line Fitting

WHAT WILL YOU GET - You will get 3pcs sintered brass filter. Thread size is 1/4". Sintered pneumatic muffler height is 26mm. The max diameter is 15mm. Maximum pressure is 300PSI, max operating temp is 35F to 300F..
HIGH QUALITY MUFFLER - Pneumatic exhaust muffler are made of high quality brass, thicker and more durable. Brass silencer is stronger than other materials silencer, it is not easy to rust, wear-resistant, not deformed and anti-corrosion..
MULTIPLE USAGE - Pneumatic silencer muffler widely used for air cylinders, cylinders, solenoid valves, crank cases, gear boxes, oil tanks and pneumatic tools. After installing the sintered brass filter, high noise reduction effect, the noise level during the operation of the equipment can be reduced, improve the user's sense of use..
PERFECT DISIGN - The compressed air silencer adopts an outer hexagonal design, and you can easily install and remove it with a wrench. Improve your work efficiency and save your precious time and energy. The noise silencer has smooth edges and meticulous workmanship, deeper and smoother threads to ensure quality..
QUALITY SERVICE - Thank you very much for your support. Piutouyar provides 30 days return and exchange service. Customer 100% satisfaction is our top priority. If you h....

Check Stock

Chicago Pneumatic WALLAIR - Wall Mounted 1.5 HP Electric Air Compressor with a 32' Built in Retractable Hose 130 Max PSI

Superior Performance: Drives up to 700 fasteners per charge and 60 pieces per minute to increase productivity for construction contractors and DIYers.
Cordless Portability: Air compressor powered by high-capacity 20 volt 4.0 Ah lithium-ion battery featuring enhanced battery life, power level indicator, and 90 minute recharge time.
Construction Applications: Perfect for crown moulding, base boards, window casings, chair rails, furniture construction, cabinetry, and other finish projects – along with powering pneumatic tools and handling inflation needs.
Compact, Lightweight, and Durable: Steel 1 gallon hotdog tank with 2 easy-to-read gauges, a locking pressure regulator, carry handle with padded grip, 4 no mar anti-vibration rubberized feet, brass safety valve and ball drain valve, and steel 1/4" universal quick connect coupler.
3-in-1 Nail / Staple Gun: Multi-purpose design allows nailing and stapling with just one tool, saving time and money (16 gauge straight finish nails from 3/4" – 2.

Check Stock

Milton S-437 TR VC 2 Screwdriver Type Valve Cap - Box of 5

Nickel plated brass, screwdriver type, TR VC 3.
Built in valve removal slot for easy installation and removal of valve core.
Tire valve cap TR VC2 Nickel plated Screwdriver type Brass Skincard.
Tire valve cap TR VC2 Nickel plated Screwdriver type Brass Skin card.

Check Stock

VEVOR Air Jack, 5 Ton/11000 lbs Triple Bag Air Jack, (Blue) & Air Jack, 3 Ton/6600 lbs Triple Bag Air Jack, Air Bag Jack Lift Up to 15.75 Inch, 3-5S Fast Lifting Air Bag Jack (Blue)

Product 1: Labor-Saving Jack: The pneumatic jack capacity: 11000 lbs/5T. Minimum height: 5.7"/ 145 mm. Maximum height: 15.75"/400 mm. It only takes 5 seconds to lift. Working Temp: -60℃~ 50 ℃. Air inlet: G1/4. Our triple bag jack is the easiest and fastest way to make the car lifted..
Product 1: Heavy Duty Construction: Our pneumatic jack is built with high-strength steel that makes the whole body sturdy and durable. The powder-coated steel frame and rubber match to reduce impact. Highly sealed airbags will not leak or be scratched. A larger stressed area fits on a soft and easy-collapsing place..
Product 1: Secure Usage: First, keep the red valve closed, open the green valve, and input the compressed air.
when inflating to the height, turn off the green valve. After use, open the red valve to bleed off air. The safety valve in the middle ensures the injected gas is not excessive to ensure the security of the use process..
Product 1: Space-saving Design: Carrying handle design fits the shape of the hand, so you can fully control the jack when you use it. And the whole structure is compact and easy to store. So you can take it outdoors conveniently..
Product 2: 6600lbs/15.75'' Max Weight/Height: The pneumatic jack capacity: 6600 lbs/3T. And it's lifti....

Check Stock