Top Brass Industrial Ball Valve Reviews

Siphon Pump 1/2" Hand Gasoline Siphon Hose for Gas Fuel Transfer Diesel Water Self Priming Shaker Safe Syphon Pump Auto PVC Sipnon Hoses, 6 Feet

  • ...h. In just seconds the siphon hose is full and flowing. A siphon only works if the outlet end is lower than the inlet and the liquid is deep enough to jiggle the ball..
  • ♠PREMIUM QUALITY MATTERIAL: Siphon pump for gasoline with thick hose wall, it can endure long time use with no crushed. Brass nozzle, PVC tube and industrial strength glass ball make it anti-static and safe for gasoline oil fuel diesel transfer..
  • ♠NYLON TIGHTEN BAND: Gas siphon with a nylon tighten band on brass valve end, you don't worry that the copper head come off from the tube and go into your car oil tank. Before use, please pull the nylon zip tie to keep the brass valve more tightening. Don't pull it out by force..
  • ♠WIDELY USE: Our syphon hose kit efficiently transfers gasoline, diesel, water, oil and urea for car on the go without electricity. Perfect for small household chores, lawn and garden, and outdoor activities. Don't suck gasoline into your mouth any more..
  • ♠ATTENTION: Auto siphon inner diameter 0.56"(1.4cm) and outside diameter 0.72"(1.8cm), brass valve end inner diameter 0.8"(2cm) and outside diameter 0.88"(2.2cm), please measure your container before purchasing and ensure suitalbe fitting, no smaller than our hose and brass valve size..
Check Stock

Nipple, 2 X 6 In

  • Price For: Each Stem Type: Blowout Proof Seat Material: PTFE Standards: UL, CSA Body Material: Brass Ball Valve Basic Body Material: Brass Port: Full Ball Valve Product Group: Manual Valve Structure: 2-Piece Handle Material: Steel with Corrosion Resistant Plating Item: Ball Valve Body Style: Inline Ball Material: Chrome Plated Brass Handle Type: Lever.
  • Temp. Range: 0 Degrees to 400 Degrees F Stem Material: Brass Max. Pressure: 600 psi CWP Pipe Size: 1/2" Tube Size: 1/2" Connection Type: Sweat x Sweat Features: General Purpose Country of Origin (subject to change): China.
Check Stock

NOMAL Brass Float Valve 1/2 inch Float Ball Valve Automatic Fill Adjustable Float Ball Valve for Livestock Waterer, Water Tank, Aquariums

  • Size: 1/2" thread, can fit many pipe connection.
  • No Leak: This float valve is sealed with rubber washer to ensure no leak.
  • Easy to Use: Very easy to install and operate, you can adjust the water level by rotating the metal wingnut or the green float.
  • Widely Used: Brass float valve can be applied for water trough, water tanks, livestock and poultry waterer, pools, aquariums, aquaculture, reservoirs and industrial, et..
Check Stock

1/4\ Brass Electric Solenoid Valve 110VAC Normally Closed VITON

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valve....
Check Stock

1 Brass Electric Solenoid Valve 110VAC Normally Closed Water Diesel.

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valve....
Check Stock

3/4 Brass Electric Solenoid Valve 24VDC N.C Air Water Fuel VITON

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valve....
Check Stock

3/4\ Brass Electric Solenoid Valve 12VDC N.C. Air Water Fuel VITON

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valve....
Check Stock

3/8 Electric Solenoid Valve 12-VDC VITON Gasket Air Gas Fuel Normally Closed

  • -NEW- Re-engineered low power coil with up to 50% less heat generation. The valve starts as 19W and as it heat up to operating temperature power reduces to approx. 10-13W..
  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
Check Stock

1/2' NPT Brass Electric Solenoid Valve 12V DC Normally Closed VITON from U.S. SOLID

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valve....
Check Stock

3/4 Brass Electric Solenoid Valve 110V AC Normally Closed Water air Diesel by U.S Solid

  • Constructed of industrial grade brass, this valve is corrosion resistant, more conducive for welding, optimal for higher temperature projects, and can be used with gasoline, diesel fuel, kerosene oil, natural gas, air etc. Due to the chemical composition of brass, this valve should NOT be used with projects involving drinking water or other water projects..
  • This valve was manufactured with a VITON seal. VITON is the most durable and high performance rubber material with the ability to resist high temperatures and corrosive chemicals and other fluids like gasoline, diesel fuel, oils, and lubricants..
  • This highly responsive valve will open and close in less than 1 second when actuated.
  • meaning it will open or close the flow instantaneously when energized or de-energized. Also, our U.S. SOLID engineers have determined that the life cycle of this valve is well over a million cycles with proper operating conditions and maintenance..
  • PLEASE NOTE: This valve is NOT a continuous duty valve and should NOT be in continuous use for more than 8 hours in a single cycle.
  • to do so will shorten the life of the valve and may cause the core of the valve to burn out. If you need a continuous duty valve for your project please search for our U.S. SOLID Motorized Ball Valve....
Check Stock

3/4\ NPT Female Threaded IPS Ball Valve Full Port Water Stop Shut Off,Heavy Duty Lead Free Brass,Quarter Turn,Blue Handle (1-Pack)

  • 3/4" NPT Female Threaded IPS Brass Full Port Water Stop Shut Off Ball Valve ,Heavy Duty Lead Free ,Quarter Turn.
  • Heavy duty: forged Brass ball valve pressure is rated 150 psi wsp for steam and 600 psi woc for water, oil and gas.
  • 3/4" Threaded IPS Lead Free Brass Water Cut off Ball Valve.
  • Size: 3/4" IPS Brass Ball Valve Max Pressure (PSIG):150 Max. temperature: 200°F.
  • IAPMO Listed to cUPC - "Lead-Free" Compliant.
Check Stock

EZ-FLUID 1-1/2 NPT Female Threaded IPS Ball Valve Full Port Water Stop Shut Off,Heavy Duty Lead Free Brass,Quarter Turn,Blue Handle 1-Pack

  • 1-1/2" NPT Female Threaded IPS Brass Full Port Water Stop Shut Off Ball Valve ,Heavy Duty Lead Free ,Quarter Turn.
  • Heavy duty: forged Brass ball valve pressure is rated 150 psi wsp for steam and 600 psi woc for water, oil and gas.
  • 1-1/2" NPT Threaded IPS Lead Free Brass Water Cut off Ball Valve.
  • Size: 1-1/2" NPT IPS Brass Ball Valve Max Pressure (PSIG):150 Max. temperature: 200°F.
  • IAPMO Listed to cUPC - Certified to NSF 61-G - "Lead-Free" Compliant.
Check Stock

MTM Hydro Ball Valve for Pressure Washer Gun, Foam Cannons, High Pressure Power Washer Shut Off Valve Plated Brass 3/8” Female BSP 3000 PSI

  • PRESSURE WASHING BALL VALVE - Premium 3/8” Plated Brass Ball Valve for pressure washer guns. 3000 PSI Max Pressure rating. Max Temp 176 degrees Fahrenheit..
  • PLATED BRASS - Ball valve pressure washer made from plated brass, offering enhanced rust and corrosion resistance. Durable pressure washer accessories built for long-term use..
  • EASY SWITCHING - Power washing valve commonly found at the base of the high pressure washer gun. Enables quick shut off to switch between pressure washing guns without turning off the entire system..
  • HIGH QUALITY SEALS - High pressure ball valve with high quality PTFE (Polytetrafluoroethylene) seals for improved performance with high heat and chemicals..
  • LIGHTWEIGHT - Pressure washer shut off valve made from lightweight materials with a rounded frame. 3/8" Female BSP Inlet x 3/8" Female BSP Outlet..
Check Stock