Top Brass Brazing Rod Reviews

10 Rods Copper Brazing Rod 15.7 Low Temperature Welding Rod Welding Consumables with Good Liquidity for Welding Refrigerator Air Conditioner Copper Pipes Copper Products

MATERIAL: 10 Rods copper brazing rods 15.7” are included in the package. The chemical composition of the brazing rods: Phosphor (P): 7%, Copper (Cu): the remainder..
ADVANTAGES: Brazing temperature range: 1310°F-1490°F. Solidus: 1310°F, Liquidus: 1490°F. Tensile Strength ( RM): 838 MPa. The PhosCopper brazing rods has good fluidity during welding, strong caulking, and can flow into small spaces..
PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can also be opened for easy storage and use..
APPLICATION: High-quality copper brazing rod are used for the welding of refrigerator copper pipes, air conditioner copper pipes and copper water pipe, as well as for the electromechanical industry..
SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you better..

Check Stock

40 Pcs Brazing Rods Solid Brass Rods Round Brass Stock Pin Brass Brazing Rods Brass Knife Pins Brass Bar Stock for DIY Craft Drift Punches Knife Handle Lathe 2 mm in Diameter 9.85 Inches in Length

Sufficient Quantity to Use: the package comes with 40 pieces of brass rods for knife handles, enough to satisfy your crafting or repairing demands, bringing you much convenience.
Appropriate Size for Processing: designed with a length of approx. 25 cm/ 9.85 inches and a diameter of approx. 2 mm/ 0.08 inches, the knife making handle pins are suitable for you to grip, store and carry around.
Easy for Welding: the brazing rod is an ideal material for you to do welding work, such as sculpture welding, model welding, circuit board welding and so on, whose melting point is 2190 degrees Fahrenheit, serving as a nice helper for you.
Satisfactory Practicality in Daily Life: there are multiple ways for you to apply the brass rods, for example, you can use them to embellish your model planes, model boats, wood crafts, knife handles and more, to make them full of your own style.
Reliable Workmanship for Lasting Service: mainly made of quality brass, the brass brazing rods are compact and stable in structure, with smooth surfaces and edges, not easy to deform or rust, able to stay vivid for a long time.

Check Stock

Forney 48490 Flux Coated Bronze Brazing Rod 3/32-Inch-by-18-Inch 10-Rods

Fluxed low fuming bronze brazing rod is a high quality, low fuming bronze brazing rod with flux.
Formulated for high tensile strength and ductility.

Check Stock

Heyiarbeit 2mm Carbon Fiber Rod Bar DIY Subject Support Poles for RC Airplane Matte Pole 400mm 15.75 Inch 10pcs

【High Material】-This carbon brazing rod is made of carbon brazing, with a smooth surface and good stability, good acid resistance, heat resistance, salt resistance, corrosion resistance, resistance to certain organic solvents, strong friction and high strength.
【Features】- Light weight, high strength, lighter than aluminum, stronger than steel, are the salient features of carbon fiber rods, better than steel-plastic-wood, anti-aging, very durable, and long service life.
【Advantages】- This carbon brazing rod is far superior to other metals in the field of corrosion, so it has good water resistance and aging resistance in corrosive environments, and is a good helper in corrosion-resistant environments.
【Application】- Carbon fiber rod are suitable for aviation model aircraft, model, multi-rotor support rods, model boats, racing, robots, DIY aircraft production, 3D printers, arrow rods, kites, windmills, sails, DIY subject support poles, mosquito nets, tents, bows, hatches, PCB equipment shafts, luggage, hand rods, as well as helicopters and R/C vehicle.

Check Stock

Heyiarbeit 1.5mm Carbon Fiber Rod Bar DIY Subject Support Poles for RC Airplane Matte Pole 200mm 7.87 Inch 5pcs

【High Material】-This carbon brazing rod is made of carbon brazing, with a smooth surface and good stability, good acid resistance, heat resistance, salt resistance, corrosion resistance, resistance to certain organic solvents, strong friction and high strength.
【Features】- Light weight, high strength, lighter than aluminum, stronger than steel, are the salient features of carbon fiber rods, better than steel-plastic-wood, anti-aging, very durable, and long service life.
【Advantages】- This carbon brazing rod is far superior to other metals in the field of corrosion, so it has good water resistance and aging resistance in corrosive environments, and is a good helper in corrosion-resistant environments.
【Application】- Carbon fiber rod are suitable for aviation model aircraft, model, multi-rotor support rods, model boats, racing, robots, DIY aircraft production, 3D printers, arrow rods, kites, windmills, sails, DIY subject support poles, mosquito nets, tents, bows, hatches, PCB equipment shafts, luggage, hand rods, as well as helicopters and R/C vehicle.

Check Stock

RTMMFG Brass Propane Torch Head Gas Cooking Grill Searing Head Attachment Gas Welding Torch Kit for Soldering Steak Grilling Sous Vide BBQ

VERSATILE TORCH - Brass torch head is sufficient for professional soldering and brazing work. Flame spreader can produce a consistent and evenly....
ADJUSTABLE FLAME - Flame control valve makes it easy to ignite/extinguish the flame and adjust the size of the flame..
STEADY FLAME - 360° rotation of torch tube is capable for various using environment. Temperature can reach 2462℉..
DURABLE BRASS TORCH - Brass pencil propane torch is made entirely of 100% brass, ensuring greater durability and reliability..
WIDE USES - Ideal for searing steaks and caramel pudding, soldering & brazing, loosening rusted nuts/bolts/screws, removing paint, jewelry making..

Check Stock

Supplying Demand SW-ALCU5.5 5 Rod Pack Aluminum to Copper or Brass 8 Inch Brazing Rods Appliance Refrigeration HVAC

Solution temperature during heat treating must be below the solidus of the braze alloy in order to ensure integrity of the joint is maintained..
Joining all brazable grades of aluminum and copper.
Aluminum to Aluminum or Aluminum to Copper wire pigtail splices.
Aluminum to Copper, Aluminum to Brass or plated terminals.
HVAC applications with Brass, Copper, Aluminum and Steel. Is effective with any of these heat sources: Oxy-acetylene torch, Natural gas torch, MAPP Gas, Induction..
Quantity per pack: 5 | Rod Length: 8 inches | Shelf Life: 2 years at ambient temp. | Density (Lbs/in³): 0.19 | Recommended Brazing Temp.: 950-1000°F (510-537°C) | Liquidus: 905°F (471°C) | Solidus: 826°F (441°C) | Appearance: Silver-Colored with White Flux Channel.
Supplying Demand replacement parts are compatible with Major Brands, but you should always verify compatibility with your specific application..

Check Stock

25 Rods Aluminum Welding Rods, Aluminum Brazing Rods for Propane Torch, Aluminum Soldering Rods for Alu, Alu Alloy, Aluminum Repair, 1/16″ X 9.84″

MATERIAL: 21 Rods 1/16″ x 9.84″ aluminum brazing rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%..
ADVANTAGES: Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces..
PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use..
APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve y....

Check Stock

Yescom DOT Portable Weld Torch Tank Kit Twin Tote Oxygen Acetylene Oxy Cutting Brazing Welding Goggles

[Multifunctional]: This Portable Welding Oxygen/Acetylene Torch Kit comes with oxygen/acetylene regulators, tanks and a brass torch, ideal for steel welding, brazing, cutting, bending and forming in light duty industrial settings such as automobile repairing.
[Portable Design]: Comes in a convenient, all-in-one portable design for easy storage and transportation, including a handy suitcase with an ergonomic and firm handle for easy carrying.
[Safety First]: Comes with DOT certification for the gas cylinder, which is made of sturdy and seamless steel in order to avoid heat inflation, ensuring safe usage at all times. Includes square goggles to protect the eyes and expand your field of vision while in use.
[Durable]: Comes with ST14 steel gas cylinder, copper welding rod, tough brass torch handle for enhanced durability and a long service life.
[Wide Application]: Perfect for industrial or artistic use by automobile repairmen, air conditioner repairmen, maintenance personnel, home artists, etc. for automotive, air conditioning and refrigerator repair or artistic metal sculpting.

Check Stock

21 Rods Aluminum Brazing Rod Low Temperature, Aluminum Welding Rods for Propane Torch, Flux Core Welding Wire for Alu, Alu Alloy, Aluminum Repair, 1/16\ X 16.93\ (1.6 mm)

MATERIAL: 21 Rods 1/16" x 16.93" aluminum brazing rods are included in the package. The chemical composition of the brazing rods: Si 12%, Mg≤0.10%, Fe≤0.80%, Cu≤0.03%, Zn≤0.20%, Mn≤0.15%, AL balance. Welding flux core 18%..
ADVANTAGES: Brazing temperature range: 716-752°F. Solidus: 716°F, Liquidus: 752°F. Tensile Strength ( RM): 130N/mm². The aluminum soldering rods has good fluidity during welding, strong caulking, and can flow into small spaces..
PACKAGING: Cloud Fire welding rod packaging has been optimized, and it is packaged in a sealed tube, which can effectively reduce the occurrence of moisture and other events compared with other packaging. The caps at both ends can be opened for easy storage and use..
APPLICATION: Aluminum welding rods for propane torch is suitable for leak welding of aluminum ship bottom, fuel tank, condenser.
crack repair of aluminum alloy engine block, base, gearbox, aluminum parts. Notice: It is not suitable for cast iron welding..
SERVICE: When you have a problem in the process of using the welding rod, please do not hesitate to contact us immediately, we will solve all problems for you. And we look forward to getting your suggestions on the welding rod, we will continue to improve the products and serve you ....

Check Stock

ZENY NEW Portable Gas Welding Cutting Torch Kit w/Hose, Oxy Acetylene Brazing Professional Set with Case

Precision welding, cutting, brazing, soldering, hand facing and more! It'll cut up to 6" and weld or braze up to 1/2" with appropriate tips.Perfect for an Amateur Metalworker or a Seasoned Professional.
High-capacity Oxygen and Acetylene regulators, with a full 2 1/2" diam. for optimal performance..
Various kinds using oxygen and gas fuel for portable welding, rivet cutting, soldering, brazing, hard-facing and metal heating process.
Deluxe single stage regulators with reverse flow check valves, brass torch handle and brass valve body for maximum strength and durability.Precision torch handle with dual check valves, cutting attachment and cutting tip (size No. 0).
The whole Kit is constructed of stainless steel and brass for durability. Suitable For Home And Business Applications,Packed in ABS case, Lighter weight, easy to carry.

Check Stock

Hot Max 22070 1/8-Inch by 18-Inch Flux Coated Brazing Rod

Excellent quality, easy flowing, low fuming brazing rod for nearly all your brazing needs.
65,000 PSI tensile strength Melting Point: 1,600-Degree F (871-Degree C).

Check Stock

XtremepowerUS 55148 Oxygen Acetylene Welder Tool Kit w/3 Nozzles Cutting Torch 15' Hose Gauge Regulators

Precision welding, cutting, brazing, soldering, hand facing and more! It'll cut up to 6" and weld or braze up to 1 / 2 " with appropriate tips.
Various kinds using oxygen and gas fuel for portable welding, rivet cutting, soldering, brazing, hard-facing and metal heating process.
A complete set includes a torch handle, oxygen regulator and acetylene regulator.
Deluxe single stage regulators with reverse flow check valves, brass torch handle and brass valve body for maximum strength and durability.
Welding kit includes multiple nozzles, hoses and fittings for all purpose welding, soldering, and other applications.

Check Stock