Top Brake Pad Pin Removal Tool Reviews

Acouto Brake Pad Thickness Tool Car Brake Pad Tester Vehicle Brake Pad Thickness Gauge Brake Pad Lining Measure Tool Automotive Measurement Brake Shoe Gauge

6mm / 0.2in---- This brake pad thickness tool is designed for brake pads (IV, V category) with 6mm / 0.2in thick base plate. This car brake pad tester is suitable for internal and external brake pads, with 1.5mm marking and calibration check.
Professional Design---- The slender design allows the tool to position the back of the lining plate, so that the probe can measure the distance between the bottom of the lining plate and the brake disc.
Practical Tool---- This brake pad thickness gauge is an ingenious tool that saves time, which is essential to any vehicle. Measure the brake pads of the vehicle without removing the wheels.
Easy to Use---- The brake pad lining measure tool is easy to operate and use, align the brake pads and press to measure, which is very convenient and highly practical.
Customer Said---- I do not use anything else when I inspect brakes on the vehicle. The tool is so simple to use and to read that anyone can do it the first time. Is that it removes the backing plate measurement of the brake pad and give you the real measurement of the pad only.

Check Stock

ABN Brake Tools 15-Piece Brake Kit with Brake Caliper Tool Brake Drum Puller Brake Adjusting Tool – Brake Tool Set

SERVICE BRAKES WITH THIS CALIPER COMPRESSION TOOL: The ABN Disc Brake Caliper Tool Set allows you to work on bearings, seals, axles, adjust clearance between drum brakes and shoe, or remove or install shoe return springs and brake pads.
This brake tools rear brake caliper tool set rotates the parking brake activated piston into the caliper cylinder.
FITS YOUR VEHICLE: Brake caliper compressor made for both disc and drum systems and covers most sizes of bearings and seals.
Press bearings and races into an open hub wheel assembly on most European and American cars.
Some tools in the kit are disk brake specific, such as the caliper piston retractor.
If you have a vehicle with rear disk brakes and a parking brake that uses the rear calipers, you will need the cube tool to spin and retract the caliper piston.
BUILT TO LAST: Brake pad spreader brake compressor tool pieces are constructed from chrome-vanadium steel (CR-V) for maximum strength and longevity.
The brake caliper press brake caliper kit pushes the caliper piston onto the disc brakes without disc brake caliper parking brake mechanism.
Caliper press brake pad tool kit provides access around emergency brake lever to service brake retaining spring.
EASY STORAGE: No longer will you need to worry about y....

Check Stock

Terminal Extractor Removal Tool Kit, 82 Pieces Depinning Key Tool Set for Car Auto Household Devices, Wire Connector Pin Release Extractor Tool with a Protective Bag

【Package Include】 Offers single, double pin extractors and casting tool of different sizes to fit most terminal. 82 Pieces electrical pin removal tool kit includes 28Pcs Single Pin Extractor, 30Pcs Double Pin Extractor, 24Pcs Casing Tool and protective bag..
【Depinning Tool With protective bag】This terminal tool removal kit set is sharp, so we provide a protective case for you. You can keep your tools in it to make it more portable and prevent children from playing with them..
【High Quality】Our pin removal tool set is made of high-quality stainless steel and plastic with high hardness. It is not easy to deform and can be used repeatedly for a long time. The pin headers are available in different specifications and are suitable for most electronic equipment maintenance, making your work more convenient..
【Wide Application】The terminal extractor tool kit are common tools for most connector terminals, suitable for most cars, such as:motorcycles and other electronic devices like household appliances..
【Easy to Use】The terminal pin removal tool is easy to use, just push and pull the terminal pins with connector removal tool for removal effortlessly from the wire harness connectors without any damage. Kindly Note: Most of the wire harnesses....

Check Stock

Bike Cassette Removal Tool with Chain whip and Auxiliary Wrench Bicycle Sprocket Removal Tools Sprocket Remover …

Designed to be used in conjunction with the cassette lock ring tool to remove cassettes from hubs. Sprocket Remover can also be used to tighten on screw-on freewheels. Caters for 8, 9 and 10 speed cassettes. When remove flywheel, fixed wheel to prevent from damage. Silver color chain whip with orange non-slip coated handle for comfort and ease of use. It is constructed from steel for durability..
This Kit combination chain whip and auxiliary wrench. Both are in high quality.
It also features hardened pins to keep the chain in place and a comfortable handle..
Cassette/Rotor Lockring Tool with pin, Smart design make it fit two size wrench..
Cassette / Rotor Lockring Removal Tool Fits Shimano, SRAM, SunTour, Chris King and other cassette lockrings. Also fits Shimano disc brake lockrings, Guide pin stabilizes tool.

Check Stock

Brake Adjustment Tool, Brake Booster Adjustment Tool, Brake Booster Push Rod Adjustment Tool for Adjustable Braking Distance of Brake Pedal, Suit for Most Brake Boosters with Adjustable Pins

Using Brake Booster Push Rod Adjustment Tool Turned Out to Be So Easy - Yoolon designed a brake booster adjustment tool that works for everyone, even if you don't have the expertise also can use power brake booster pushrod pin adjustment tool quickly and easily. The brake adjustment tool's designed with a magnetic inner core, which can be firmly adsorbed on the surface of the master cylinder and booster during use. Our brake adjustment tool can improve work efficiency and saves time.
Brake Adjustment Tool Rejects All Safety Hazards - We designed a new master cylinder push rod length gauge is measure the depth of the master cylinder piston bore in order to adjust the length of the booster push rod pin. And two ends of the booster push rod pin adjustment tool are designed with a magnetic inner core, which can be firmly adsorbed on the surface of the master cylinder and booster during use which making your measurement and maintenance process easier.
High Quality That Puts Everyone's Mind at Ease - Get master cylinder push rod length gauge that no more worries about quality. Our brake booster adjustment tool kit is made of high-quality aluminum alloys, an....

Check Stock

2 Pairs Road Brake Pads with Installation Tool Caliper Brake Blocks 50 mm

2 Pairs C brake pads: the bike brake pads are made of hard-wearing rubber which can decrease noise and provide good braking power in wet and dry conditions.
Size: the road brake pad is about 50 mm/ 1.97 inch in length.
Each piece has a nut and a spacer, it's easy to remove and install with the tool.
V shaped water-leaking tanks: c brake pads with V-shaped tank design will do no harm to the wheel, and improve braking ability.
Good compatibility: this versatile c brake pads are suitable for most road brake bikes.
Each pair c brake pad has left and right part, without front and rear, every piece brake pad has a text mark.
Quantity: package include 2 pairs (4 pieces) road brake pads with a tool.
Come with the lightweight tool for easy installation.

Check Stock

Maerd Terminal Removal Tool Kit, 76Pcs Terminal Ejector Kit for Car, Pin Extractor Tool Set Release Electrical Wire Connector Puller Repair Key Removal Tools

【Portable Safety Protective Bag】This set of tools is sharp and can be placed in a protective box for easy carry and prevent children play as toys.
【Package Include】 76Pcs pin removal tool kit includes 28Pcs Single Pin Extractor, 30Pcs Double Pin Extractor, 18Pcs Casing Tool.
【High Quality】The terminal extractor tool is made of premium quality stainless steel and plastic, not easily get out of shape, can be long term use. The pin removal tool has different sizes fit any terminal.
【Easy to Use】 The electric pin remover tool is easy to use, just push and pull the terminal pins with connector removal tool for removal effortlessly from the wire harness connectors without any damage.The O ring handle make it more safe to operate the terminal pins connectors.
【Wide Application 】This set of electric pin remover tool is light weight and compact shape, Split into multiple portable sets, which can be used in different places, The wire extraction tool is perfect for cars, motorcycles, household appliances and other electronic devices.

Check Stock

Kauplus Brake Service Kit, 14-Piece Professional Drum Brake Tool Set w/Brake Lining Gauge…

Idea for servicing drum brakes on most of import and domestic vehicles adjustment, installation and removal application.
Various of TPR grip Brake Spring tool, each of spring compressor, brake spring installer, spring removal tool and brake retaining.
Tri-function Brake spring pliers removes and replaces shoe return springs of drum brakes effectively.
14 pcs Brake Service Kit all the contains Made in Taiwan, comes in an organizer tray, with Brake Lining Gauge, identifies thickness level ranges for brake lining inspection to be used on most foreign and domestic cars and trucks.

Check Stock

MENKEY Terminal Removal Tool Kit for Car, 39 Pieces Wire Connector Pin Release Key Extractor Tools Set for Most Connector Terminal

Package Include- This pin removal tool kit includes 12Pcs Single Pin Extractor, 20Pcs Double Pin Extractor, 1Pcs Three Pin Extractor, 6Pcs Casing Tool.
High Quality - The depinning tools are made of premium quality steel and plastic, strong and durable, would not easily get out of shape, can be used repeatedly. The O ring handle make it more safe to operate the terminal pins connectors.
Easy to Use - No need to pry open the terminals, just push and pull the terminal pins. The automotive terminal removal tools can effortlessly removing terminal wires from the wire harness connector and add a new wire, so you can maintain the factory original harness and plug in your own electronic device without any damage.
Wide Application -The electrical pin removal tool kit includes 39 Pcs different types car plug terminal extraction repair tools, can be widely used for most of the connector terminal removal, picker harness terminals and connector crimp pin removal (such as cars ,wiring harness and household appliances).
Convenient - This set of electric pin remover tool is light weight and compact shape, coming with 3 pieces of stainless steel beaded ball chain, easy to use and carry.

Check Stock

Blackburn Big Switch 15 Functions Bike Multi-Tool (Black, One Size)

15 FUNCTIONS - Designed to field fix everything related to your drive train, wheels or brakes.
this is the smallest toolbox you've ever carried.
MORE LEVERAGE - This tool includes t or l handle wrenches that allow you to get a better purchase on bolts.
SPREAD 'EM - An accidental squeeze of a brake when the wheel is out is all it takes to get your brake pistons stuck. Luckily our pad spreader saves the day and keeps you drag-free.
CHAIN BREAKER - An essential tool, the chain breaker lets you insert a pin to put a chain back together, pop a pinout to remove a chain and/or remove a quick link from a chain.
CARRYING CASE - Includes a stylish carrying case, specifically built for this product.

Check Stock

Kent. 20 Girls Trouble Aqua/black Bicycle

2 Pairs C brake pads: the bike brake pads are made of hard-wearing rubber which can decrease noise and provide good braking power in wet and dry....
Size: the road brake pad is about 50 mm/ 1.97 inch in length.
Each piece has a nut and a spacer, it's easy to remove and install with the tool.
V shaped water-leaking tanks: c brake pads with V-shaped tank design will do no harm to the wheel, and improve braking ability.
Good compatibility: this versatile c brake pads are suitable for most road brake bikes.
Each pair c brake pad has left and right part, without front....
Quantity: package include 2 pairs (4 pieces) road brake pads with a tool.
Come with the lightweight tool for easy installation.

Check Stock

ABN Universal Drum Brake Puller 8-Piece Set with Carrying Case – Master Removal Tool Kit for Automotive Drum Brakes

Practical: Use the ABN Universal Drum Brake Puller 8-Piece Set with Carrying Case – Master Removal Tool Kit for Automotive Drum Brakes to service....
Durable: Constructed from heat-treated metal that is plated with chrome for strength and longevity.
Comfortable Grip: Molded and textured tool handles are a larger size for a secure grip and less user fatigue.
Easy Storage: Heavy-duty 14.8” x 2.3” x 10.5” (37.6cm x 5.8cm x 26.7cm) blow-molded plastic carry case for easy transportation, simple storage,....
Contents: Package includes (1) spring compressor + (1) brake spring installer + (1) spring removal tool + (1) brake retaining spring tool + (1) brake....

Check Stock

Somtton Brake Caliper Piston Rewind Tool - Right Handle Set Brake Caliper Wind Back Tool for Disk Brake Pad Replacement Most Cars with Right Handed Thread

Brake piston rewind tool.The Distance of two pins is 22mm.The Diameter of the pins head is 6mm..
Adopted with vanadium steel material, higher hardness and not easy to deform.
Complete with reaction plate and reversible 3/8" drive dual pin head..
Fits most European and Japanese cars with right handed thread..
Package Contents:1 x Disc Brake Pad Calliper Tool. If you have any questions about the product,just feel free to contact us..

Check Stock