Top Brake Pad Compressor Reviews

Cartman 12pc Heavy Duty Disc Brake Caliper Tool Kit Universal Front and Rear Brake Piston Tool Screw-in Wind Back Rewind and Piston Compression Forces or Rotates Pistons into Calipers

Caliper Wind Back Disc Brake Pad Piston Compressor Tool.
12pcs kit for brake pad replacement- rotating piston into the caliper for proper fit.
Ideal for rotating piston back into caliper and exposing new pads.
Constructed for professional mechanics, built to last even through years of service.
Come with Brand New in Blow Molded Carrying Case.

Check Stock

ABN Brake Tool Sets w/ 18 Pc Disc Brake Caliper Tool Kit & 8 Pc Drum Brake Tool Kit – Removal and Installation Tools

...to allow you to remove and replace worn and broken brake parts such as bearings, seals, axles, shoes, pistons, springs, pads, calipers, and rotors.
Rear brake caliper tools are designed to be used on most foreign and domestic cars and trucks.
BRAKE CALIPER WIND BACK TOOL SET: Each piece of the 18-piece brake caliper compressor tool set is constructed of heavy-duty metal for durability and longevity.
This set includes a left-handed and right-handed thrust bolt and 15 disc adaptors that are compatible with a wide range of vehicles.
All parts in this brake piston compressor tool set are designed to prevent damaging pistons and seals.
DRUM BRAKE TOOLS: This 8-piece professional grade brake set includes 3 varying sizes of brake spoons to easily adjust most brake drums and 5 varying brake spring tools to service these drum brakes.
Constructed of heavy-duty metal and ergonomic plastic handles, the brake piston compression tool set provides you with the perfect grip and durability for your project.
EASY STORAGE: Heavy-duty 14 x 3 x 12.3-inch (35.5 x 7.6 x 31.2 cm) plastic blow-molded carrying case with latches and handle protects these brake kits for easy transportation, safe storage, and quick organization.
CONTENTS: Brake caliper kit includes a holding plate, ....

Check Stock

ATPEAM 24PCS Disc Brake Caliper Tool Set Wind Back Tool Kit for Brake Pad Replacement Reset

Easy Operation: For brake pad replacement and rotating pistons back into the caliper on your car, truck or 4-wheel drive disc brake vehicle. Includes both right-handed and left-handed thrust bolt assemblies..
Durable Material: Carbon steel construction with a rust-proof blasted finish, these blades will stand up to heavy use and accidental drops. It’s perfect for everyone from DIY novices to professional mechanics..
Wide Application: This multi-disc brake caliper wind back tool kit includes 18 adapters fitting hundreds of vehicle makes and models including American, European, and Japanese.
Package Included: 18 x Disc Adapters (#0, #2, #3, #4, #5, #6, #7, #8, #9, #10, #A, #E, #F, #K, #K1, #K2, #M, #N).
2 x Handed Thrust Bolt Assemblies (Left & Right).
Blue Blow Mold Case: The Disc Brake Piston Caliper Compressor Rewind Tool Set is packed in a heavy-duty, blow-molded case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set..

Check Stock

ATPEAM 24pcs Heavy Duty Disc Brake Caliper Tool Set and Wind Back Kit for Brake Pad Replacement

Durable Material: Carbon steel construction with a rust-proof blasted finish, these blades will stand up to heavy use and accidental drops. It’s perfect for everyone from DIY novices to professional mechanics..
Easy Operation: For brake pad replacement and rotating pistons back into the caliper on your car, truck or 4-wheel drive disc brake vehicle. Includes both right-handed and left-handed thrust bolt assemblies..
Package Included: 18 x Disc Adapters (#0, #2, #3, #4, #5, #6, #7, #8, #9, #10, #A, #E, #F, #K, #K1, #K2, #M, #N).
2 x Handed Thrust Bolt Assemblies (Left & Right).
Wide Application: This multi-disc brake caliper wind back tool kit includes 18 adapters fitting hundreds of vehicle makes and models including American, European, and Japanese.
Black Storage Case: The Disc Brake Piston Caliper Compressor Rewind Tool Set is packed in a heavy-duty, blow-molded case with precision-sized compartments for every piece - great for storage and transport while lengthening the life of the tool set..

Check Stock

ABN Pneumatic Vacuum Brake and Clutch Bleeder Kit, 0.75 Liter – Master Cylinder 90–120 PSI Air Pressure Fluid Bleed Tool

QUICK BRAKE BLEEDING: The ABN Pneumatic Vacuum Brake and Clutch Bleeder Kit, 0.75 Liter – Master Cylinder 90–120 PSI Air Pressure Fluid Bleed Tool works with your air compressor to quickly bleed those stubborn brake lines.
Easier to use and less messy than an inconvenient hand pump.
EASY TO USE: Select a fill bottle adaptor for the master cylinder to hold it in place, fill the bottle with fluid, pop it on the master cylinder and open the valve.
Once the master cylinder is filled, the bottle flow will stop so you can connect the vacuum jar to an air compressor (not included), connect the bleed hose to the brake bleeder and open bleeder, then pull trigger on jar and lock in place, let it draw for 4-5 minutes, close bleeder, and check brake pedal pressure.
ONE-PERSON JOB: Innovative bleeder design allows you to fully complete the job by yourself.
WORKS FOR YOUR VEHICLE: For use on motorcycle, car, and truck.
90 to 120 PSI (6-8 bar) air supply requirement.
25-ounce (0.75L) approximate refill container capacity.
Includes different adapter sizes to accurately fit your application.
CONTENTS: Package includes a brake and clutch bleeder, refill container, and plastic adapters.

Check Stock

BTSHUB Professional 12pcs Front and Rear Caliper Disc Brake Screw-in Wind Back Rewind and Piston Compression Tool Kit for Brake Pad Replacement

Professional Usage: The Caliper Wind Back Disc Brake Pad Piston Compressor Tool is used for brake pad replacement- rotating piston into the caliper for a proper fit.
Works to wind back piston and provides enough clearance for new pads. Ideal for rotating piston back into caliper and exposing new pads.
Universal Adapters: Includes 10 different piston adapters, universal for all screw-type calipers that require the piston to be wound back into the housing (not compatible with hollow pistons).
it fits all domestic, European and Japanese cars.
Long Last: All the parts are CNC machined alloy steel with rust-resistant sandblasted finish stand up to repeated use and long term service.
Easy to Storage: All the tools are well organized in a storage case for easy transportation, simple storage, and quick identification.
Package Includes: 1x holder, 1x main body, 10x adapter, and 1x plastic carrying case.

Check Stock

ATPEAM Pneumatic Vacuum Brake and Clutch Fluid Bleeder Tool Kit | Car Truck Motorcycle Brake Oil Change Set with Extractor and Refill Bottle, 4 Master Cylinder Adapters, 2 Air Quick Plugs

Pneumatic Brake Oil Bleeding Tool: This brake bleeder kit is used for changing brake and clutch oil, as well as suck out old oil and air from replaced brake system on motorcycle car truck and pickup. Connect the extractor to the air compressor and brake caliper, turn on high power air compressor to 90-120PSI, negative pressure is generated in the braking system to suck out the waste fluid and air, and guide the new oil to fill the whole brake system..
One Man Operation: Refill bottle can be held on the brake fluid reservoir. On the 1L waste oil extractor bottle, there is a the hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve, as well as the trigger locker is also helpful for hand-free when suck. Also, you do not need to tread the brake pedal again and again when use this brake and clutch bleed tool..
Automatic Brake Refill Device: There is a long screw fittings on 0.8L refill bottle cap, which can work with the master cylinder adapter to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out, and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it. ....

Check Stock

EBC Brakes EBPCK1015 Complete Semi-Sintered V-Pads Brake Pad Change Kit

Fits: Harley Davidson FLHX Street Glide 2008-2013, FLHX Street Glide 2014-2015, FLHXS Street Glide Special 2015.
Complete Semi-Sintered Touring Bike V-Pads Brake Pad Change Kit includes 2 EBC FA409V Front Brake Pads and 1 EBC FA409V Rear Brake Pad.
EBC Brakes Semi-Sintered V-Pads are a new blended Semi-Sintered brake pad that combine the highest qualities of an organic brake pad with the endurance of a sintered equivalent brake pad.
The V-Pad range have been dyno tested and prove to be longer lasting than other cheap sintered aftermarket brake pads.
The Vee brake pad range are designed for the heavy cruiser/street bike market as a replacement brake pad.

Check Stock

JOJOY LUX Brake Caliper Press Tool, 360 Degree Swing Ratchet Expander Wrench Car Wheel Piston Spreader with Extra 2PCS Large Plates for Single Twin Quad Sextuplet Piston Disc Brake Caliper

... twist and compress, which some brakes need..
【Labor Saving】Brake repair brake spreading tool adopts 360 degree ratchet design, it is easy to get into place and use from any direction, also your hands will not get fatigued from the constant squeezing. The ratchet is in the centre of the dual piston brake caliper compressor, the two spreading plates keep parallel, make sure to spread the force on the caliper piston evenly, in case of caliper damage or pistons dislocation..
【Use-friendly】 Swing the long lever handle to expand and retract the spreading plates, and the positive and negative regulation is realized by flipping the reversing switch in the ratchet. Because of ratcheting mechanism, both spreading plates need pressure to start the ratchet, please squeeze them for the first few swing until the suitable size to insert into the calipers, then go ahead to swing..
【Premium Quality】Our brake caliper compressor uses high quality spreading plates with 1/8" thickness steel, high strength, not easy to deform. The lever handle has red cushion, skid resistance and feel good, will not hurt your hand while using. The bigger spreading plates with build-in small magnets and cylindrical pins, can install and unload quickly and easily from the compress....

Check Stock

ARES 70191 - Brake Spring Compressor Tool - Provides Leverage to Remove and Install Stubborn Hold-Down Springs of Drum Brakes

SPECIFICATIONS: Our Brake Spring Compressor tool provides the leverage needed to easily remove and install stubborn drum brake shoe retaining spring washers up to 7/8 inches in diameter..
DESIGN CONSIDERATIONS: This Brake Spring Tool features a comfortable handle and a fluted socket for maximum gripping force, so you can firmly secure the drum brake hold down springs..
FRUSTRATION FREE: Our brake spring tool's design makes the removal and replacement of backing plate springs, cups, and pins easy, so you can get the job done quickly and easily..
RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you have any issues with your ARES Brake Spring Compressor Tool, simply contact customer service for troubleshooting help, parts, replacement, or refund..
ASPCA BUSINESS AMBASSADOR: We are proud to be part of the ASPCA Business Ambassador Program. If you have a pet, you realize they are more than a pet, they are part of the family. With your support, we’re proud to help this great organization..

Check Stock

WISPAUSU Air Brake Caliper Piston Compression Tool Kit 23PCS Pneumatic Brake Pump Adjusting Wind Back Tool Brake Caliper Piston Rewind Tool

Air Brake Caliper Tool - 23PCS Pneumatic Brake Caliper Wind Back Tool Kit, perfect for Brake DIY Enthusiasts or Mechanics. Easy to rewind your brake caliper piston with the Pneumatic Caliper Piston Compressor Tool..
Easy to Use - The tool attachs the adapter quickly and firmly by its magnetic plate. Easy to turned the windling handle 360-degree clockwise anticlockwise. Press its button to quick release pressure..
What You Get - 1pcs air operated brake compressor tool, 22pcs adapters that fit to the piston, and 1PCS hard plastic suitcase. Made of high carbon-steel..
Wide Applications - Adapters compatible with most vehicles, such as Alfa Romeo Audi BMW Citroen Dacia Fiat Ford GM Honda Hyundai Iveco Jaguar Lancia Mazda Mercedes Mini Mitsubishi Nissan Opel Peugeot Renault Saab Seat Skoda Suzuki Toyota Vauxhall Volvo VW, etc..
1 Year Warranty - We offer 1 year after-sales service. Your order will get fast delivery by FBA..

Check Stock

JMMRRR Automotive Brake Caliper Press Tool with 2 PCS Steel Plates Ratcheting Caliper Piston Tool with 360 Degree Swing Ratchet Blue

... designed to "push" the piston back, cannot twist and compress at the same time..
【360° Ratcheting Design】Adopts 360 degree ratchet design, it is easy to get into place and use from any direction, the ratchet is in the centre of the dual piston brake caliper compressor, both spreading plates need pressure to start the ratchet, to ensure correct alignment to prevent the piston from being misaligned and damaging the brake components..
【Brake Hook & Reversing Switch】Two caliper hooks to protect the brake fluid lines and calipers provides maximum protection for the brake fluid lines and the brake calipers, there is a small positive and negative regulation switch on the ratchet, you can flip it to realize the conversion of expand and retract spreading plates..
【Comfortable And Durable】This brake caliper compression automotive tool is made of alloy steel, high strength, not easy to deform, which has corrosion resistance, the blue rivet handle is made of rubber, it conforms to ergonomic design, which is non-slip, comfortable grip, uniform force, will not hurt your hands during use..

Check Stock

JMMRRR Automotive Brake Caliper Press Tool with 2 PCS Steel Plates Ratcheting Caliper Piston Tool with 360 Degree Swing Ratchet Red

... designed to "push" the piston back, cannot twist and compress at the same time..
【360° Ratcheting Design】Adopts 360 degree ratchet design, it is easy to get into place and use from any direction, the ratchet is in the centre of the dual piston brake caliper compressor, both spreading plates need pressure to start the ratchet, to ensure correct alignment to prevent the piston from being misaligned and damaging the brake components..
【Brake Hook & Reversing Switch】Two caliper hooks to protect the brake fluid lines and calipers provides maximum protection for the brake fluid lines and the brake calipers, there is a small positive and negative regulation switch on the ratchet, you can flip it to realize the conversion of expand and retract spreading plates..
【Comfortable And Durable】This brake caliper compression automotive tool is made of alloy steel, high strength, not easy to deform, which has corrosion resistance, the red rivet handle is made of rubber, it conforms to ergonomic design, which is non-slip, comfortable grip, uniform force, will not hurt your hands during use..

Check Stock