Top Brake Fuel Tube Reviews

MuHize 25 Ft. of 3/16 and 1/4 Zinc-Coated Brake Line Tubing Kit - 25 ft 3/16" and 1/4" Steel Tube Roll (Includes 16 & 16 Fittings)

PACKAGE INCLUDE - Part 1: ① MuHize 3/16” Brake Line Kit Replacement.
② 2 x 3/16"(7/16-24) Inverted Tube Nut.
③ 10 x 3/16"(3/8-24) Inverted Tube Nut.
⑤ 2 x 3/16"(9/16-18) Inverted Tube Nut.
PACKAGE INCLUDE - Part 2: ① MuHize 1/4” Brake Line Kit Replacement.
② 2 x 1/4” (9/16-18) Inverted Tube Nut.
③ 2 x 1/4” (1/2-20) Inverted Tube Nut.
④ 12 x 1/4” (7/16-24) Inverted Tube Nut..
SUPER EASY BENDING & ANTI-RUST - MuHize Zinc-coated brake lines are easy to be bent with great flexibility by hand and flare by simple tools. They are made with unique rust corrosion proofing technology..
WIDELY APPLICATION - MuHize 3/16 brake line tubing kit commonly fits for Hydraulic Braking Systems, Fuel Systems, and Transmission Systems,etc. It is also widely fit for household, industrial and commercial uses..
PROFESSIONAL - MuHize focus on outstanding features and benefits of braking line. We promise that if the line is installed correctly out, the lines will extend the lifespan of the vehicle..

Check Stock

Racewill 25 ft 3/16 Copper Coated Brake Line Kit Includes 16 Fittings and 4 Unions Brake Line Fittings + Brake Line Double & Single Flaring Tool Kit

MATERIAL：Racewill copper coated steel line is easy to be bent by hand and flare by simple tools.all brake line fittings are made of durable brass to prevent rust and plated for corrosion resistance.
UPGRADE TO 20 FITTINGS: ① 2 x 3/16” (7/16-24) Inverted Tube Nut.
② 10 x 3/16" (3/8-24) Inverted Tube Nut.
③ 2 x 3/16” (1/2-20) Inverted Tube Nut.
④ 2 x 3/16"(9/16-18) Inverted Tube Nut.
RUST AND CORROSION PROOFING：Our 3/16 Copper coated steel line are the longest lasting brake line and much better than standard steel tubing. Copper coated brake line are ideal for vehicles experiencing harsh weather and environmental conditions.
MAKE DOUBLE & SINGLE FLARES: Designed to use when flaring single or double flare in a variety of material: copper, aluminum, brass, magnesium, and soft steel brake line tubing. Flaring tool apply to 1/2", 3/8", 5/16", 1/4", 3/16" O.D. tubing..
WIDELY APPLICATION：Brake line and fittings Fits for Most Hydraulic Braking Systems, Fuel Systems, and Transmission Systems,etc. It is also widely fit for household, industrial and commercial uses..

Check Stock

4LifetimeLines 25' 3/16 True Copper-Nickel Alloy Non-Magnetic Brake Line Replacement Tubing Coil and Fitting Kit, Inverted Flare

Nickel-copper alloy is very flexible making for super easy bending & flaring for installation - You can hand bend our brake lines with no bending tools needed.
Rust and corrosion proofing technology - Our Copper Nickel Alloy lines are the longest lasting line and are much better than standard steel tubing. Copper Nickel lines are ideal for vehicles experiencing harsh weather and environmental conditions.
Meets all SAE and ISO specifications - Our tubing is the best quality tubing on the market.
We take pride in producing the best fuel, transmission and brake lines in the industry. Our Limited Lifetime warranty protects all of our products against defects for its entirety as long as it is installed correctly.
Complete Brake Line Replacement Tubing Kit Assortment - Includes 16 Fittings: 2 x 3/16” (7/16-24) Inverted Tube Nut, 10 x 3/16” (3/8-24) Inverted Tube Nut, 2 x 3/16” (1/2-20) Inverted Tube Nut, 2 x 3/16” (9/16-18) Inverted Tube Nut.

Check Stock

hikotor Flexible 25 Feet 3/16 Inch Copper Coated Alloy Brake Line Tubing Kit with 16 Inverted Flare Fittings SAE Standard for Hydraulic Fuel Transmission System

SUPER FLEXIBLE - Uses professional technology, the tube roll owns perfect flexibility for easy bending and flaring, no tools needed.
In addition, 0.028" wall thickness assures it not easy broken off.
PREMIUM QUALITY - The brake tube is made from heavy duty Copper coated steel line, rust resistant and long lating.
With SAE and ISO approved, the thread provides you guarantee all year around.
PRIME CHOICE - Provides an easiness to work with and high-end brake line replacement option for professionals and do-it-yourselfers.
Ideal for vehicles experiencing harsh weather and environmental conditions.
COMPLETE KITS - The package includes 1 x replacement brake line and 16 x most common inverted tube nut: 2 x 3/16” (7/16-24) nut, 10 x 3/16” (3/8-24) nut, 2 x 3/16” (1/2-20) nut, 2 x 3/16” (9/16-18) nut.
WIDE APPLICATION - The brake line kit works great on hydraulic braking systems, fuel systems, transmission Systems, etc.
Also commonly fits to household, industrial, commercial uses and more.

Check Stock

EASYBERG 3/16' Stainless Steel Brake Line Clamp with Screw Street Rod Custom Dune Buggy （24pc）

Brake & Fuel Line Clamp - Street Rod Clip Single 3/16'' tube, Stainless, .600'' wide with .200'' hole.
These clips will hold 3/16" brake line,These are thick gauge with nice rounded corners.
These are exact to the factory originals and have all the details - they are the correct size and shape with the correct color.
This is a exact Inline Tube reproduction of the original,These are the details that separate the first place cars from the rest.
Package Includes:12x polished stainless steel clamps,12x stainless steel allen head screws.

Check Stock

ABN Professional Brake Line Flaring Tool Kit 45 Degrees - Single Bubble Double Flare Tool Kit for Steel Copper Tube

[Get a Leakproof Connection]: When building car brake lines, the ABN Professional Brake Flaring Tool Kit adds a flare (makes tubing wider) to brake line end for a leak-free connection without hours of hand cramping or twisting exercises.
[Fits Your Application]: 45-degree set creates single, bubble, and double flares on steel, stainless steel, and soft metal (copper, aluminum) brake lines, transmission cooler lines, and fuel lines.
For 3/16-inch (4.75mm), 1/4-inch (6.35mm), 5/16-inch (8mm), and 3/8-inch tubing.
[Use Your Vise]: Use on a bench-mounted vise in your workshop or on a hitch-mounted vise in the field (not intended for use under car).
6-inch (15.2 cm) T-handle screw clamp holds die and tube in place so you can create flares quickly and easily.
[Durability You Need]: Deburred square pipe end with outer edge chamfered approximately 0.25 x 45 degrees.
Each die block is 1.7 inches (4.3 cm) long.
Approximate 1.5-inch (3.8 cm) actual clamping surface [we recommend only placing bends in the last 2.5 inches (6.4 cm) of tube after flared].
[Package Contents]: Brake line flare kit includes (1) brake line flare tool with T-handle and 11-inch lever with 5-inch texturized rubber sleeve (27.9x12.7 cm), (4) end dies, (1) instruction manual, and (1) 14.1 x 6.1....

Check Stock

5/16 Fuel Hose 8mm Transmission Oil Cooler Hose High Pressure Fuel Injection Hose For Conveying Gasoline, E-85, E10, Diesel, Oil, Coolant, and Bio-Diesel Fuels In Cars, Trucks, Buses, Etc

... your hand. You, however, need to bend it slowly and back and forth for perfect curves..
WIDE APPLICATION ◀ The 8mm fuel hose is specially designed to meet SAE 30R9 standard and can be compatible with any fuel (including methanol and nitromethane), oil,E85, E10, coolant, brake, transmission, clutch, diesel, hydraulic fluid, pump gas, and nitrous oxide..

Check Stock

3/8 Transmission Cooler Hose - 6AN High Pressure Fuel Line Braided Hose For Marine, Car, Engine System, Alcohol, Nitro, Fuel Transmission, Clutch, Power Steering, Oil and Hydraulic (10 FT)

...nd you can even bend it with the palm of your hand. You, however, need to bend it slowly and back and forth for perfect curves..
WIDE APPLICATION ◀ The 6an fuel line is specially designed to be compatible with any fuel (including methanol and nitromethane), oil, coolant, brake, transmission, clutch, diesel, hydraulic fluid, pump gas, and nitrous oxide. but NOT FIT E85..

Check Stock

VEVOR Brake Line Flaring Tool, 37 & 45 Degree Single, Double, and Bubble Flares for 3/16', 1/4', 5/16' and 3/8' Tube Size, Suitable for Soft Metal of Copper Lines

Four Tube Expanding Size: This brake line flaring tool includes 4 dies in the following sizes: 3/16 inch (4.75mm), 1/4 inch (6.35mm), 5/16 inch (8 mm), 3/8 inch (9.5 mm). It creates 37° and 45° single, double, and bubble brake flares in seconds. Reduce the friction on flares to ensure your vehicle operates at optimal performance..
Applicable Materials: This double flare brake tool is suitable for expanding copper and aluminum piping. It is an excellent tool for repairs on vehicles or taking lines off of a vehicle. Whether you're working on brake lines, transmission cooler lines, or fuel lines, our flaring tool will help you create the flares you need quickly and easily..
Leakproof Connection: With the turret-style design, the professional brake line flaring tool keeps all your dies ready. They are available and within immediate reach with the convenient turret carrier, greatly saving you the hassle of fumbling for small parts or losing them..
Vise-Mounted: The brake line flare tool is compatible with a bench-mounted vise in your workshop or on a hitch-mounted vise in the field (not intended for use under a car). The 6.3-inch (16 cm) T-handle screw clamp can hold the die and tube in place firmly without vibration. After repairing, your vehicle will be ....

Check Stock

Brass Inverted Flare Fitting Tube Nut, Brake Line Plug, 5/16\ OD, 5pcs

Tube nut for use with inverted flared tubing.
Brass for corrosion resistance, ductility at high temperatures, and low magnetic permeability.
For use with liquid petroleum (LP) and natural gas, refrigeration, hydraulic brake, trans-mission cooler lines, fuel, oil, air, lines, power steering..
Not for use in potable drinking water applications.
Working pressure up to 2000psi depending on Tube (O.D),Will withstand burst pressure 5000psi with bundy-weld..

Check Stock

ASD Brake Line Fittings Assortment For 1/4\ Tube (7/16\ - 24 Thread, Inverted Flare) (Pack of 15-5 Short Nuts, 5 Long Nuts, 5 Unions)

Auto Supplies Direct 1/4" Brake or Fuel Line Fittings Assortment for Cars and Trucks.
Total of (15) 1/4" Tube Line Fittings- (5) 1/4" Tube Nuts, (5) 1/4" Long Tube Nuts, (5) 1/4" Unions.
Most common SAE inverted flare / Double flare size.
Compatible With 1/4" Steel, Copper, Nickel, Poly Armour, and Cupronickel Tubing.
High Pressure Resistant, Constructed From Safe and Professional Quality Brass, Lead Free.

Check Stock

ASD 3/16 and 1/4 Brakeline fittings kit nuts unions compression fittings 70 Pieces

Auto Supplies Direct (70) Piece 3/16″ & 1/4″ Brake Line Fittings Kit (3/16″ and 1/4″ Tube Nuts, Unions, and Compression Fittings) for Cars and Trucks.
Contains a (30) Piece 3/16″ Inverted Flare Brake Line Fittings Assortment, which Includes: (10) 3/16″ Short Tube Nuts, (10) 3/16″ Long Tube Nuts, and (10) 3/16″ Unions.
Contains a (30) Piece 1/4″ Inverted Flare Brake Line Fittings Assortment, which Includes: (10) 1/4″ Short Tube Nuts, (10) 1/4″ Long Tube Nuts, and (10) 1/4″ Unions.
Contains (5) 3/16″ OD Compression Brake Line Fittings.
Contains (5) 1/4″ OD Compression Brake Line Fittings.

Check Stock

MASTERCOOL 72485-PRC Universal Hydraulic Flaring Tool Set Includes 3/8 and 1/2 Transmission Cooling Line Die and Adapter Sets with Tube Cutter Silver/Blue

TUBE AND DIE SET STABILIZING ARM for easy tube forming.
MAGNETIC ADAPTER HOLDER keeps adapters in place.
EQUIPPED WITH AN ENLARGED DIE SET COMPRESSION AREA for better grip of dies.
CAN BE USED ON "annealed steel" & "dead soft".
INCLUDES dies and adapters to fabricate push connect 1/4, 5/16 and 3/8".
GM fuel line flare, brake lines and transmission 5/16 and 3/8".
flare/double flare 3/16, 1/4, 5/16, 3/8 and 1/2".
metric bubble flare 4. 75, 6, 8, and 10mm.
GM transmission cooling line 3/8" and 1/2".
mini tube cutter for 1/8" to 5/8" (3 - 16 mm) O. D. tubing (1/8 to 1/2" nominal) all packaged in a custom blow molded case.

Check Stock