Top Brake Fluid Tank Cap Reviews

Motive Products - 0118 Black Label GM/Late Mustang/Tesla 3-Tab Power Bleeder Kit

  • Fits Cadillac's, Buick's, Chevrolet's, Oldsmobile's, Pontiac's, Saturn's, also fits 2005+ Ford Mustangs.
  • Motive Products Power Bleeder kits use pressurized brake fluid to force air and old fluid out of your brake lines.
  • Just pour clean fluid into the pressure tank, attach the Power Bleeder cap to your fluid reservoir, and pressurize the system using the built-in hand pump and pressure gauge..
Check Stock

SMOTIVEPRO Engine Oil Extractor Pump Brake Fluid Extraction Syringe Vacuum Filling and Extracting Pump Capacity 500CC

  • SUPERIOR MATERIALS:The Syringe oil extractor pump made of high quality, solid, durable material, Built-in dual rubber pads, fit the piston closely to avoids leakage,Thicken wall enhances high strength and provides long service life..
  • Extra tubes and Different Capacity for Choice: Extra tubes make extra length for jobs in hard to reach places and won't have to worry about spillage during use. Different Size Brake fluid extractors provide best Choice on the Capacity:0.5Liter/1.5Liter.
  • Extraction and Infusion of Liquid: Simple syringe-type action using the manual fluid pump can dual-way extract and fill fluid by differential extractor dispenser quickly and easily. Ideal for emptying or filling up the master tank and other reservoirs, extracting brake fluid from the tank and adding new oil before flushing the brake fluid to the brake caliper..
  • Widely Application: Ideal for extracting or changing engine oils or lubricants in ATV's, boats, farm equipment, industrial gear boxes, motor vehicles, motor bikes, RV's, etc. Applicable to engine oil, gear oil, gearbox oil, including chemical resistant oils,brake fluid, diesel fuel, coolants, hydraulic systems and water, etc..
Check Stock

AUTOOL Car Brake Bleeder Kit AST605 Four Pumps Brake Oil Exchanger Tool 110V Automotive Pulsating Fast Brake Extractor Oil Pump Machine with Adjustable Pressure 8.7~43.5psi for DOT3 DOT4 DOT5.1

  • Motive Products Power Bleeder kits use pressurized brake fluid to force air and old fluid out of your brake lines.
  • Just pour clean fluid into the pressure tank, attach the Power Bleeder cap to your fluid reservoir, and pressurize the system using the built-in hand....
  • The kits are available for a variety of master cylinders.
  • Includes adapters 1100, 1101, 1103, 1105, 1107, 1108 and fits most foreign and domestic vehicles.
  • Kit also includes 6 feet of tubing and quick release connectors for all adapters.
Check Stock

Mityvac MVA6005 16 oz. Fluid Reservoir Kit

  • Fiment: Universal For Kawasaki Ninja 300 250 ZX-6R ZX25R ZX7R ZX9R ZX10R ZX12R ZX14R.
  • Features: Embroidered logos onto the reservoir sock covers Fashion design Fuild Cover socks to decorate your motorcycle..
  • Features: Cover the brake fluid storage tank to add a touch of color to your bicycle..
  • Features: Prevent the brake fluid from leaking onto the motorcycle body and damaging the body..
  • Features: Prevent sunlight (ultraviolet rays) from degrading the brake fluid, resulting in poor braking..
Check Stock

MOWOK Fits For KAWASAKI Vulcan S 650 VN650 2015-2021 Motorcycle Front Brake Fluid Reservoirs Tank Oil Cap Cover

  • [Fitment] brake fluid reservoir cap Suitable For KAWASAKI Vulcan S 650 VN650 2015-2021. ( Please Ensure This Part Fits For Your Motorcycle Before order ).
  • [Package] 1 Pieces of Front brake fluid cap with 2 screws easy to install.
  • [Usage] To cover the front brake fluid cylinders reservoirs, decorate your bike, fashion and durable.
  • [Material] T6061 CNC Aluminum, High quality and not easy to fade.
  • [Quality Assurance] MOWOK attaches importance to the shopping experience and satisfaction of each customer, So no matter what problems, please contact us first, we will try our best to solve any problems for you..
Check Stock

Dorman 603-648 Brake Master Cylinder Reservoir Compatible with Select Audi / Volkswagen Models

  • FITMENT - For MT07 MT09 FZ07 FZ09 YZF R1 R3 R6 R25 R15 R125 600R for CBR 250R 300R 250RR 400 600F 600RR CBR 600 F2 F3 F4 F4i 900RR for Suzuki GSX-R 600 750 1000 1100 for Kawasaki Z650 Z750 Z800 Z900 Z1000 ZX10R ZX12R ZX14..
  • HIGH QUALITY MADE - The aluminum oil cup is made of CNC billet aluminum and it is hard anodised and has a bright and vibrant colour - It is a great accessories for improve the look of your motorcycle..
  • PERFECT REPLACEMENT - Aluminum brake fluid reservoir ia stronger and more durable than plastic reservoirs and it will be a good replacement for the original plastic one..
  • SECURE DESIGN - The brake fluid tank is sealed with rubber ring inside to prevent leakage and protect riding safety..
  • PACKAGE INCLUDED - ✔Brake fluid reservoir ✖ 1 ✔ Brake fluid reservoir holder ✖ 1 ┃Capacity: about 40 ML.
Check Stock

BILITOOLS 3L Vacuum Brake Bleeder Kit One Person Pneumatic Brake Fluid & Clutch Bleeding Extractor Tool with Adapters & 1L Refilling Bottle

  • A lightweight, easy to carry pneumatic brake, clutch and engine oil change tool with automatic cut off, can be used by one person..
  • Compare with other similar product, our larger capacity Pneumatic Brake Bleeder can automatically and continuously provide more suction to allow more quick bleeding of brake and clutch lines..
  • Quick, clean and efficient operation without specialized brake reservoir caps. Draws fluid from the bleed screw, enabling either bleeding or full replacement of fluid in system..
  • Includes 1L brake fluid refill bottle, 3L pneumatic brake bleeder tank with 63 inches flexible hose and universal bleeder screw adapter. Designed to drain most standard and ABS brake systems..
  • Inlet air pressure:4.8-11.6 bar (70 -170psi). Avg.air cons 4.5 CFM. Come with 16 pieces bleed screw adapters for a variety of bleed screw..
Check Stock

Thorstone Pneumatic Brake Fluid Bleeder Tool Kit, 1L Vacuum Brake Oil Change Set with Extractor and Refill Bottle +4 Master Cylinder Adapters + 2 Air Quick Plugs, for Car, Truck, Motorcycle 90-120PSI

  • PNEUMATIC BRAKE OIL BLEEDING TOOL - This brake bleeder kit is good at exchanging brake and clutch fluid by sucking out waste fluid and air,guiding the new oil to fill the whole brake system on motorcycle car truck and pickup..
  • ONE PERSON OPERATION - Brake jobs are some of the most common vehicle maintenance jobs that can be done at home. Refill bottle can be held on the brake fluid reservoir and a hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve. Simple brake bleeder kit one man operation, no need for treading the brake pedal over and again..
  • BRAKE OIL REFILL DEVICE - A long screw fittings on 750ml refill bottle cap with master cylinder adapters to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it..
  • COMPLETE ACCESSORIES - This vacuum brake bleeder kit includes everything you need to quickly and easily remove air from your brakes without creating a mess.
  • 4 master cylinder adapters are suitable for most vehicles (21-30mm, 24-32mm, 28 -37mm, 32-41mm) + 2 air quick plugs + 1.8m long transparent....
Check Stock

ITEQ Brake Fluid Liquid Tester Pen with 5 LED Indicators, Calibrated For DOT3 DOT4 Brake Fluid

  • Test the car brake fluid quality quickly to check whether it’s qualified, which can remind you to change the brake fluid when necessary to avoid traffic accident.
  • The LED indicators will show percentage of water in the brake fluid with 3 colors green yellow and red.
  • Calibrated for cars using DOT4 and DOT3 brake fluids (But DOT3 is almost replaced by DOT4 because DOT4 has better performance).
  • Only takes seconds to know the results,very easy to use.
  • CE and RoHS approved. Protective cap included.Takes 1 x AAA/1.5V battery (not included).
Check Stock

Hunter-Bike Front and Rear Brake Fluid Reservoir Cap Brake Oil Cover for Kawasaki Ninja 400 Z400 2018 2019 2020 (Blue)

  • Features ：Prevent dust and debris from accumulating on the fuel tank and pollutants in the engine fluid, giving you a clean and comfortable feeling..
  • Good Sealing Performance：Good sealing performance, effectively tightening the fuel tank cap to prevent liquid loss or power steering overflow, no oil leakage..
  • Excellent material：Made of high-quality fabric, the absorbing material cylinder and the clutch tank are leaking, and the craftsmanship is exquisite and can be used for a long time..
  • Unique Design：The classic blue and minimalist design adorns your car with a glamorous luxury, with decorative features, a stylish look and improved car quality..
  • Wide application: The universal fuel tank cap protective sleeve is suitable for all models and can be used with most fuel tanks..
Check Stock

ATPEAM Pneumatic Vacuum Brake and Clutch Fluid Bleeder Tool Kit | Car Truck Motorcycle Brake Oil Change Set with Extractor and Refill Bottle, 4 Master Cylinder Adapters, 2 Air Quick Plugs

  • Pneumatic Brake Oil Bleeding Tool: This brake bleeder kit is used for changing brake and clutch oil, as well as suck out old oil and air from replaced brake system on motorcycle car truck and pickup. Connect the extractor to the air compressor and brake caliper, turn on high power air compressor to 90-120PSI, negative pressure is generated in the braking system to suck out the waste fluid and air, and guide the new oil to fill the whole brake system..
  • One Man Operation: Refill bottle can be held on the brake fluid reservoir. On the 1L waste oil extractor bottle, there is a the hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve, as well as the trigger locker is also helpful for hand-free when suck. Also, you do not need to tread the brake pedal again and again when use this brake and clutch bleed tool..
  • Automatic Brake Refill Device: There is a long screw fittings on 0.8L refill bottle cap, which can work with the master cylinder adapter to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out, and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it. ....
Check Stock

SWANLAKE Fluid Extractor, Extraction&Fill Pump,Fluid Syringe Pump Manual Suction Vacuum Fuel Car Transfer (1500ML)

  • Filling/Extracting Pump is designed to remove and fill brake fluid, anti-freeze, gear oil, power steering fluid and more..
  • Includes 1 transparent fluid syringe with locking adapter, 3adapters,2 hoses with locking cap on end, extension for deep reach and small diameter applications..
  • The hose attaches to quick-connect on the cylinder. Double seals for brake fluid and anti-freeze, assembled on the plunger..
  • Heavy-duty construction allows for strength and durability. A high quality handle help holding pump easily..
Check Stock

OEMTOOLS 25443 Extraction and Filling Pump, Brake Fluid Vacuum Pump Tool for Power Steering and Brake Fluid Reservoir, Garage & Shop Fluid Evacuators

  • SIMPLE BRAKE FLUID EXTRACTOR: Leave the turkey baster in the kitchen and easily extract automotive fluid in moments.
  • The plunger seal draws fluid out of the reservoir smoothly, eliminating messes with one manual fluid transfer pump.
  • FULL DISCLOSURE: Dual scale molded into the body of the fluid evacuator to measure liquid in quarts and milliliters.
  • Clear durable plastic body makes it easy to see how much fluid the syringe extractor collects as well as quality and condition.
  • LOW MAINTENANCE: The body of the fluid transfer pump disassembles into its components, making it easy to clean the cylinder, change the gaskets on the plunger, or otherwise service your fluid pump automotive tool.
  • REACH ANY RESERVOIR: Fluid evacuator pump comes with two connecting tubes that can extend the length of the brake fluid extractor pump from 11” all the way to 26”, so you can access any hard-to-reach filler neck or reservoir.
  • PRODUCT DETAILS: Maximum fluid extractor automotive capacity reaches 200 mL.
  • Includes (2) 7.5” car fluid pump extension tubes with cap locks.
Check Stock