Top Brake Fluid Change Tool Reviews

Lisle 38780 22' Square No-Splatter Pad

  • 22” Square Pad Protects Floors & Work Area from Messy Oil Splatter..
  • Insert 22" square pad in transmission drain funnels or larger oil drain pans, before oil change to eliminate oil splatter..
  • Porous material allows fluid to quickly pass through into funnel or pan..
  • Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents..
  • Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents.Pad material resists engine oil, transmission fluid, coolant, brake fluid, brake cleaner, gear oil and other solvents..
  • Important: Not for coolants or fluids that will be recycled in the vehicle. Material fibers may contaminate the fluid..
Check Stock

OEMTOOLS 25443 Extraction and Filling Pump, Brake Fluid Vacuum Pump Tool for Power Steering and Brake Fluid Reservoir, Garage & Shop Fluid Evacuators

  • SIMPLE BRAKE FLUID EXTRACTOR: Leave the turkey baster in the kitchen and easily extract automotive fluid in moments.
  • The plunger seal draws fluid out of the reservoir smoothly, eliminating messes with one manual fluid transfer pump.
  • FULL DISCLOSURE: Dual scale molded into the body of the fluid evacuator to measure liquid in quarts and milliliters.
  • Clear durable plastic body makes it easy to see how much fluid the syringe extractor collects as well as quality and condition.
  • LOW MAINTENANCE: The body of the fluid transfer pump disassembles into its components, making it easy to clean the cylinder, change the gaskets on the plunger, or otherwise service your fluid pump automotive tool.
  • REACH ANY RESERVOIR: Fluid evacuator pump comes with two connecting tubes that can extend the length of the brake fluid extractor pump from 11” all the way to 26”, so you can access any hard-to-reach filler neck or reservoir.
  • PRODUCT DETAILS: Maximum fluid extractor automotive capacity reaches 200 mL.
  • Includes (2) 7.5” car fluid pump extension tubes with cap locks.
Check Stock

KHTD Brake Fluid Tester Pen, Auto Brake Diagnostic Testing Tool with 5 LED Lights, Compatible with DOT3 DOT4 DOT5.1 Brake Fluid

  • CONVENIENT TOOL: This brake fluid tester pen shape design is a very small and convenient tool to test the moisture of your auto brake fluid. Simply press the button at the top, dip the probe the Testing the water content of your brake fluid dot 3, dot 4 and more will only take few seconds..
  • MULTIPLE TESTING TYPE: The dot 3 brake fluid tester can also be uses for testing the fluids of DOT4, DOT5.1, ENV6 & ENV4. With this one automotive brake fluid tester, you can finish different jobs..
  • EASY TO READ: With the percentage readings next to the LED lights on the brake fluid tester pen, you can simply read the result of water content in your brake fluid. When multiple LED lights are on, the maximum readings shall be the result of the brake fluid testing..
  • PREMIUM QUALITY: This pen brake fluid tester is made of premium nylon raw material more durable to use. （1 AAA battery needed for use, not included in the Pack).
  • QUICK RESPONSE: we are committed to offer good products as well as good services. Feel free to contact us if you have any problems.
Check Stock

Phoenix Systems (3001-B) Brake Fluid Test Strips, 100 Test Strips Per Tube, BrakeStrip, FASCAR, Copper

  • Helps increase the number of needed brake fluid exchange services you perform by providing proof for the needed service..
  • Gives you and your team of service advisors confidence to offer a needed brake fluid exchange..
  • Identifies potential brake flulid related problems before they occur -thereby ensuring your customers safety..
  • Simply remove a test strip from the tube, dip it into brake fluid and 60 seconds later you will know the condition of the brake fluid. (scientific proof).
  • The test follows MAP guidelines and DOT test standards to determine when to change brake flujid. Great for DOT 3, 4 and 5.1 brake fluid (most vehicles use DOT 3 or 4).
Check Stock

Phoenix Systems (2005-B) Bench Brake Bleeder Kit, One Person Bleeder, Fits All Makes and Models

  • Patented Reverse Bleeding removes more trapped air than any other brake bleeder by simply pushing Brake Fluid fluid from the bottom up..
  • Reverse bleeding is the only method capable of bleeding tough ABS units without a scan tool..
  • Allows you to refill and bench bleed a completely dry brake or clutch system. Perform Reverse, Vacuum, Pressure and Bench bleeding all with the same tool..
  • The Bench Bleeder is considered a Medium Duty tool for average shop use. Compatible with DOT 3, 4 and 5.1 brake fluid..
  • Is the easiest one-person bleeder you will ever use. No more asking your co-worker to help you finish a brake job..
Check Stock

Phoenix Systems (3006-B) Brake Fluid Test Strip Kit, 100 Test Strips and 100 Rating Cards, BrakeStrip, FASCAR

  • Helps increase the number of needed brake fluid exchange services you perform by providing proof for the needed service..
  • Gives you and your team of service advisors confidence to offer a needed brake fluid exchange..
  • Identifies potential brake flulid related problems before they occur -thereby ensuring your customers safety..
  • Simply remove a test strip from the tube, dip it into brake fluid and 60 seconds later you will know the condition of the brake fluid. (scientific proof).
  • The test follows MAP guidelines and DOT test standards to determine when to change brake flujid. Great for DOT 3, 4 and 5.1 brake fluid (most vehicles use DOT 3 or 4).
Check Stock

VXSCAN Brake Fluid Tester, Brake Fluid Liquid Testing Pen for DOT3 DOT4 Vehicle, Automotive Brake Fluid Moisture Tester with 5 LED Indicators

  • ✔ Useful Brake Fluid Tester: Check the health status of your car brake fluid quickly, and remind you to change the brake fluid in time to make you more comfortable to drive..
  • ✔ Extensive Application: Support most of the vehicle with DOT3 DOT4 car brake fluid. This brake fluid tester is developed for both professional and amateur, widely applied in individual, repair factories and dealer workshops..
  • ✔ Simple Design: 5 LED indicators show the percentage of water in the brake fluid. The brake fluid tester pen is compact and portable, with a non-slip material and nickel-plated metal probe..
  • ✔ Easy Operation: Install the LR03 AAA 1.5V battery(included), press the button at the top, dip the probe into the brake fluid, and the test result will be indicated by LEDs in a few seconds. The brake fluid tester pen will automatically power off after about 15 seconds of inactivity..
  • ✔ NOTE: If the green LED no longer lights up after pressing the button, replace the battery. After each use, clean the test probe with tap water..
Check Stock

Phoenix Systems (2003-B) V-12 Reverse Brake & Clutch Bleeder Kit, Medium Duty One Person Bleeder, Hard Case

  • Patented Reverse Bleeding removes more trapped air than any other brake bleeder by simply pushing Brake Fluid fluid from the bottom up..
  • Reverse bleeding is the only method capable of bleeding tough ABS units without a scan tool..
  • Allows you to refill and bleed a completely dry brake or clutch system. Perform Reverse, Vacuum, Pressure and Bench bleeding all with the same tool..
  • The V-12 is considered a Medium Duty tool for average shop use. Compatible with DOT 3, 4 and 5.1 brake fluid. Comes with a injection molded hard case..
  • Is the easiest one-person bleeder you will ever use. No more asking your co-worker to help you finish a brake job..
Check Stock

Lettre d un Rabbin Converti aux Israélites Ses Frères sur les Motifs de Sa Conversion Classic Reprint

  • ☞Built in Pressure Monitoring System☞The pump for filling the brake fluid reservoir is equipped with a pressure monitoring device. You can adjust....
  • ☞Optimize Advantages☞Compared with the traditional compression brake fluid bleeding device, the pulsating electric brake oil exchanger can....
  • ☞Widely Usage☞Autool AST 605 is suitable for European, American and Asian car brake fluid tanks, it almost can apply for all vehicles. This....
  • ☞High Efficiency☞Our main bleed kit requires only one person to operate and allows you to easily to use and change the brake oil. It can change....
  • ☞Don’t Worry☞ Ship from American warehouse, then you can receive it around 7 working days.. For damage caused by non-human factors, AUTOOL....
Check Stock

Automotive Brake Fluid Detector - Universal Car Brake Fluid Tester with High-Precision Probe for Auto DOT3 DOT4 DOT5.1 Hydraulic Fluid/Liquid/Oil Moisture Analyzer

  • 【You Must Have】Brake pressure was transmited by brake fluid, the pressure transmit will out of function once brake fluid include too water. In order to safe-driving, we must test water ratio scale in brake fluid regularly. The brake fluid tester help us do current maintenance, make sure we drive in safety condition..
  • 【Scope of Application】Automotive Brake Fluid Detector is common fit for most vehicle. Check the health status of DOT-3, DOT-4, DOT-5.1 brake fluid and also most synthetic brake fluids. It's extremly convenient for personal use and broadly applied in individual workshops, repair factories and dealer workshops..
  • 【Brake Fluid Tester】When the brake oil moisture content is detected, the LED indicator will lights up. The brake fluid tester will emit a “beep”alarm when the water content exceeds 3% of the red light. The alarm is loud and stereoscopic, allowing you to easily measure even in noisy environments..
  • 【Special Design】High resolution LCD display with backlit provides an intuitive interface for easy reading data even in the dark. The fuselage has good texture, one button and one function, easy to operate. Buzzing alarm system, test result is clear absolutely..
  • 【Ideal Tool】The automotive brake fluid tester has 250mm goo....
Check Stock

NEXPEAK Brake Fluid Tester Pen with 5 LED for DOT3/DOT4 Car Diagnostic Automotive Testing Tool …

  • Quickly and conveniently to check the quality of the brake fluid, read the results in seconds and let you know it the brake fluid need to be change or....
  • Easy to operate this brake fluid test pen, press the button and insert the tester into reservoir for one second when the green LED on..
  • 5 LED indicates you the test result and tells you brake fluid quality, it is convenient to know if the brake fluid is healthy or not..
  • Battery: 1 x AAA/1.5V (not included). When the green LED doesn’t light up, it means the battery has run out of power and need to replace a new....
  • Attention: wash the test probe with tab water after every use..
Check Stock

eOUTIL Brake Fluid Tester Pen, Hydraulic Fluid Liquid Oil Moisture Analyzer with 5 LED Indicators, Auto Brake Diagnostic Testing Tool for DOT3 DOT4 Brake Fluid

  • SAFE&USEFUL---The unit is Mini Pen Liquid Moisture Water Tester Tool. Check the health status of DOT3, DOT4, DOT5 car brake fluid, it will be safer for your driving..
  • 5 LED INDICATORS---5 LED to indicate percentage of water in the brake fluid with three colors green yellow and red. Even in the dark does not affect reading, make reading data easier..
  • EASY TO USE---The brake fluid tester is easy to use. Check the quality of brake fluid in car only takes seconds. Make it easier to operate for beginner. It's a must-have car tool for your car owners..
  • PORTABLE&DURABLE---Brake fluid tester pen is small compact size, easy to carry. Super strong ABS shell, has long service life..
  • AUTO TURN OFF---In order to save power, this test pen has the automatic shutdown function, it will automatically turn off the power 15 seconds after starting every time..
Check Stock

ATPEAM Pneumatic Vacuum Brake and Clutch Fluid Bleeder Tool Kit | Car Truck Motorcycle Brake Oil Change Set with Extractor and Refill Bottle, 4 Master Cylinder Adapters, 2 Air Quick Plugs

  • Pneumatic Brake Oil Bleeding Tool: This brake bleeder kit is used for changing brake and clutch oil, as well as suck out old oil and air from replaced brake system on motorcycle car truck and pickup. Connect the extractor to the air compressor and brake caliper, turn on high power air compressor to 90-120PSI, negative pressure is generated in the braking system to suck out the waste fluid and air, and guide the new oil to fill the whole brake system..
  • One Man Operation: Refill bottle can be held on the brake fluid reservoir. On the 1L waste oil extractor bottle, there is a the hanger which can hook on the engine hood and keep the bottle above the vehicle bleeder valve, as well as the trigger locker is also helpful for hand-free when suck. Also, you do not need to tread the brake pedal again and again when use this brake and clutch bleed tool..
  • Automatic Brake Refill Device: There is a long screw fittings on 0.8L refill bottle cap, which can work with the master cylinder adapter to snap on the mouth of the vehicle's brake fluid reservoir, without hand support. Fully open the valve on the long screw, the fluid will flow out, and stop once the brake fluid level in the reservoir has been sufficient to cover the threaded port, no need to keep an eye on it. ....
Check Stock