Top Brake Calipers Reviews

2" DROP SUSPENSION & WILWOOD 4 PISTON BRAKE SET FOR 55-57 CHEVY, CURRIE REAR END, AXLES, 9" FORD POSI-TRAC 3RD MEMBER, RED CALIPERS, 12" ROTORS SPINDLES MASTER CYLINDER BOOSTER CONTROL ARMS

  • Brand New Suspension & 12" Wilwood Brake Kit For 1955-1957 Chevys with 2" Drop Spindles (Part # GMB5557X-K72). This specific set features 2" drop spindles, Rotors, and Red Dynalite 4 piston front calipers & Red Dynalite 4 piston rear calipers. Fits: 1955-1957 Chevrolet Bel Air, Delray, 150, & 210. Excludes All Station Wagons, Sedan Deliveries, and Nomads due to their Bowtie shaped gas tank that requires a centered housing rear end, as opposed to a centered pinion rear end..
  • Includes: *Currie 9-Plus Notch-Back rear end with 31 spline axles (#CE-GMB5557X): Currie crate rear ends are designed to be a bolt-in upgrade. Built to the stock 60” width & pinion specs. Heavy-duty 2" wide leaf spring pads are installed in the stock location for easy bolt-in installation *Southwest Speed 9" Ford Rear End Third Member With Posi Trac-Loc (#603-2078): This kit comes with a 3.70 ratio gear, which is a good cruising ratio. We have ratios from 3.50 to 5.00 that can be substituted in.
  • *Southwest Speed 2" Drop Spindles (SWS Part # 103-9760): SWS drop spindles provide a full 2" drop, while not changing the vehicle's steering geome....
Check Stock

NEW SOUTHWEST SPEED DISC BRAKE KIT, FRONT, 2" DROP SPINDLES,ROTORS, BLACK WILWOOD CALIPERS, COMPATIBLE WITH 55-57 CHEVY, PERFORMANCE BRAKE KIT, PART# 205-2052

  • Southwest Speed 2" Drop Spindle & 10 1/2" Disc Brake Kit with Wilwood Calipers (Part #205-2052) for Both Front Wheels. Features Powder-Coated Black Wilwood Calipers..
  • These 1-piece rotor and hat kits deliver the cost effective combination of braking power and style of American muscle cars and vintage rods. They are fully compatible with OE master cylinder output. They provide solid brake capacity and complimentary style with wheel, tire, and suspension upgrades on all types of daily drivers, race vehicles, and ultra-styled show machines..
  • Wilwood's D154 1-Piston Calipers are a lightweight, high-strength, extreme-duty alternative to the OE-style cast iron calipers. Forged billet aluminum bodies, stainless steel pistons, and competition style high-temperature seals put an end to the rust, bore pitting, and seal failures that plague the OE calipers..
  • Kit includes parts for both front wheels: 1.00" Thick x 10.50" o.d. 1-piece rotors/hats 5 x 4.75" Bolt pattern 12mm x 1.5 studs 2" Drop Spindles Strong 4140 steel construction Wilwood D154 1-piston forged aluminum calipers - Black 2.50" pisto....
Check Stock

ABN Ratcheting Caliper Piston Tool – 4 in 1 Disc Brake Caliper Compression Tool Universal Brake Caliper Spreader Tool

  • BRAKE CALIPER PISTON TOOL: Use the ABN Ratcheting Brake Caliper Compressor Tool to compress pistons quickly and easily into the calipers.
  • Disc brake pad spreader tool creates a larger space between the caliper cavity to make room for newer and thicker brake pads.
  • Quad and dual piston brake caliper tool comes pre-lubricated to protect against oxidation.
  • It is suggested to lubricate between uses.
  • 4 IN 1 TOOL FITS YOUR VEHICLE: Disc brake caliper tool set includes 2 sets of piston plates that spread from 1-9/16 to 2-3/8 inches (2.5 to 5.1 cm) to allow plenty of room to install new brake pads.
  • Use as a single piston caliper tool, a dual piston caliper tool, a quad piston caliper tool, and a rear brake caliper tool.
  • This versatile caliper piston compressor tool is ideal for cars, trucks, and some commercial vehicles.
  • Works on both fixed and floating calipers.
  • RATCHETING ACTION: Brake piston compression tool provides a 360-degree swing that allows you to keep the compression plates in place while you lever the handle back and forth to spread or retract the plates.
  • Centrally located ratchet screw creates even force when compressing pistons to ensure proper alignment and to prevent damage to your brake components.
  • Reverse tool movement to retract compression p....
Check Stock

NEW 2\ DROP SUSPENSION & WILWOOD BRAKE SET, SPINDLES, CURRIE REAR END & AXLES, POSI, 11\ DRILLED DISCS, BLACK CALIPERS, MASTER, BOOSTER, ARMS, 1968 1969 1970 1971 1972 CHEVELLE EL CAMINO CUTLASS GTO

  • Brand New Suspension and Brake Kit, with 2" Drop Spindles, for 1968-1972 GM A-Body Cars (Part # GMA6872X-K73) 003e This specific set features 2" Drop Spindles, Steering Arms, and Wilwood brakes with Drilled/Slotted Rotors and Black Calipers.
  • Includes: | Currie 9-Plus Notch-Back Rear End with 31 Spline Axles (Currie # CE-GMA6872X) | Southwest Speed 9" Ford Rear End Third Member with Posi Trac-Loc (SWS Part # 603-2078) | Southwest Speed 2" Drop Spindles (SWS Part # 103-9776) | Southwest Speed Steering Arms (SWS Part # 101-9652).
  • Wilwood Disc Brake Kit with Drilled Rotors and Black Calipers (Wilwood Part # 140-10996-D Front and # 140-140-11389-D Rear) | *** These Brake kits require at least 15" diameter wheels ***.
  • Front Brake Kit includes 003e Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors 003e Forged Dynalite 4 Piston Calipers - Black 003e Caliper Mounting Brackets 003e BP-10 Brake Pads 003e Hubs, Bearings, Seals 003e All hardware to install | Rear Brake Kit includes: 003e Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors with Hats 003e Low-Profile Dynapro 4 Piston Calipers - Black 003e Drum Parking Brake Assemblies with Caliper Mounting Brackets 003e Bearing Retainers 003e BP-10 Brake Pads 003e All hardware to install.
Check Stock

NEW WILWOOD FULL FRONT DISC BRAKE KIT, 12' DRILLED ROTORS, RED DYNALITE CALIPERS, PADS, 2002-2006 ACURA RSX, 2004-2005 HONDA CIVIC HATCHBACK SI 5 LUG, 2002, 2003, 2004, 2005, 2006

  • ...remium Big Brake Forged Dynalite Bolt-On Front Hat and 12.19" Disc Brake Kit (Part # 140-7014-DR) for Both Front Wheels. * Only one side pictured. See the list, the diagram, and the brake kit assembly booklet below for a detail of the auto parts included. * Features Drilled and Slotted Rotors with Powder Coated Red Calipers..
  • Wilwood brake kits consist of specifically engineered & matched groups of components designed to provide superior brake system performance & custom appeal over a wide range of applications. * Forged Billet Dynalite Calipers, oversized 12.19" o.d. rotors, and high performance Wilwood brake pads deliver big brake stopping power with high-tech style for front wheel drive sport compacts. These kits are the perfect compliment wheel, tire, and suspension upgrades on all types of vehicles..
  • These Big Brake kits require at least 16" diameter wheels..
  • Brake kit includes parts for both front wheels: | * Drilled and Slotted,.810" Thick x 12.19" O.D. Rotors | * Forged Dynalite Calipers - Red | * Caliper Mounting Brackets | * BP-10 Smart Compound Brake Pads | * Brake Hats | * All Hardware necessary to install the complete braking system on both front wheels | * Complete brake kit weighs approximately 36 lbs. | Below you can view and download th....
Check Stock

R&G Brembo HIGH TEMP Brake Caliper Decals Stickers Set of 4 (White)

  • Brembo Decal Specially designed for the Brembo 6 Piston and 4 Piston brake calipers.
  • Made with Professional High Quality Materials. 5-7 Year Outdoor life.
  • You will receive 4 Decals, Instructions and a Decal Surface Preparation Solution.
  • R&G Specialize in Brake Calipers Decals and are made with High Quality Vinyl Temperature Resistance that Stand the Heat of the Calipers... made In USA and ships within 24hr.
  • Warranty: RG Decals Guarantee that our decals are not going to melt and they are going to resist the Heat of your calipers for many years..
Check Stock

NEW CURRIE 70-87 CHEVY C-10 GMC C-15 C1500 TRUCK 2WD 5-LUG REAR END WITH WILWOOD DISC BRAKES, 11\ DRILLED ROTORS, RED CALIPERS, LINES, PARKING BRAKES, AXLES BEARINGS C10 C15, 1982 1983 1984 1985 1986

  • New Currie Enterprises Rear End with 31 Spline Axles with Wilwood Disc Brake Kit including Drilled Rotors and Red Calipers, Parking Brake Cable Kit, and Brake Line Kit for the applications below (Part # GMC7087X5-K7) 003e Currie Crate Rear Ends are designed to be a bolt-in upgrade.
  • Fits: | Chevrolet Trucks: 003e Will Fit All Late-1970 to 1987 C-10 2wd Trucks with 5-Lug wheels | GMC Trucks: 003e Will Fit All Late-1970 to 1987 C15/C1500 2wd Trucks with 5-Lug wheels.
  • Includes: | Currie 9-Plus Centurian Notch-Back Rear End with 31 Spline Axles (Currie # CE-GMC7087X5) 003e 31 Spline performance axle package 003e Housing includes all 3rd member studs installed 003e GMT7087X5 GMC7072X5 GMC7387X5 003e Built to the stock overall width (63 5/8") and pinion offset specs 003e 63 5/8" is measured outside-of-axle-flange to outside-of-axle-flange, in other words, where the wheel bolts on to where the wheel bolts on.
  • Wilwood 11" Disc Brake Kit with Drilled Rotors and Red Calipers (Wilwood Part # 140-11389-DR): | Brake Kit includes: 003e Drilled/Slotted, .810" Thick x 11.00" O.D. Rotors with Hats 003e Low-Profile 4 Piston Dynapro Calipers - Red 003e Drum Parking Brake Assemblies with Caliper Mounting Brackets 003e Bearing Retainers 003e BP-10 Smart Compound Br....
Check Stock

JKSPORTS Shimano BR MT200 Hydraulic Disc Brake Set Front 800mm and Rear 1400mm BR-BL-MT200 MT200 Hydraulic Disc Brake Set Front and Rear

  • SHIMANO OEM MT200 Hydraulic Disc Brake Set Front 800mm and Rear 1400mm BR-BL-MT200 MT200 Hydraulic Disc Brake Set Front and Rear.
  • Left and right levers Front and rear calipers 2 brake pads 2 pre-bled hoses (750mm & 1350mm).
  • These brakes come filled and bled. come with 1*BH59 insert and bush Complete set with levers, cables and calipers.
  • SHIMANO BR BL MT200 Hydraulic Disc Brake MTB Mountain Bike Calipers Left & Right Lever.
Check Stock

R&G Brembo HIGH TEMP Brake Caliper Decal Sticker Set of 2 Decals (White)

  • Set Of 2 Decals Made from high quality material for Brembo 4 Piston Brake calipers.
  • You will receive 2 Decals, Instructions and a Decal Surface Preparation Solution.
  • R&G Specialize in Brake Calipers Decals and are made with High Quality Vinyl Temperature Resistance that Stand the Heat of the Calipers... made In USA and shipped from Florida within 24hr (Average delivery between 3 and 12 days).
Check Stock

JOJOY LUX Brake Caliper Press Tool, 360 Degree Swing Ratchet Expander Wrench Car Wheel Piston Spreader with Extra 2PCS Large Plates for Single Twin Quad Sextuplet Piston Disc Brake Caliper

  • 【Application】This brake caliper press tool suits for disc brake, NOT for drum brake. The tool is equipped with 2 groups of push boards: 7.01x2.36"and 4.53x2.17".Smaller ones are suitable for disc brake system with twin and quad pistons fixed calipers, or single and twin pistons floating calipers. The bigger ones more fit for some sextuplet pistons fixed calipers. Also this ratcheting caliper spreader is designed to "push" the piston back, can not twist and compress, which some brakes need..
  • 【Labor Saving】Brake repair brake spreading tool adopts 360 degree ratchet design, it is easy to get into place and use from any direction, also your hands will not get fatigued from the constant squeezing. The ratchet is in the centre of the dual piston brake caliper compressor, the two spreading plates keep parallel, make sure to spread the force on the caliper piston evenly, in case of caliper damage or pistons dislocation..
  • 【Use-friendly】 Swing the long lever handle to expand and retract the spreading plates, and the positive and negative regulation is realized by flipping the reversing switch in the ratchet. Because of ratcheting mechanism, both spreading plates need pressure to start the ratchet, please squeeze them for the first few swing until the....
Check Stock

MGP Caliper Covers 16238SMGPRD Red Brake Covers

  • 2018-2019 TOYOTA CAMRY XLE, XSE, XLE HYBRID: Must have the Electronic Park Brake. Requires 17" Wheels or larger. MGP caliper covers are designed to mount over OEM brake calipers..
  • ALUMINUM MATERIAL: Aerospace Grade Aluminum, no plastic material used. High quality aluminum brake caliper covers paired with vehicle specific stainless-steel clips and powder coated for durability to enhance the appearance of your wheels..
  • SIMPLE & SECURE INSTALLATION: Patented fastening system makes installing brake caliper covers quick & easy. No adhesives or caliper modification is required. Easy removal for brake service or maintenance. Caliper Cover Installation time: 1 hour.
  • MADE IN THE USA: MGP caliper covers are tested for safety and quality to produce the best caliper covers. Our aluminum brake caliper covers are designed to divert heat away from your brakes and out through the top of your calipers. Officially Licensed by major car manufacturers..
Check Stock

AutoWanderer Tool Brake Caliper Compression Tool, Car Ratcheting Brake Spreader Caliper Pistion Press Tool for Single Twin Quad Piston Disc Brake, Red

  • ...ratchet for positive and negative adjustment. Tips: Both spreader plates need pressure to start the ratchet..
  • ✔【Application】: Our professional brake caliper press suitable for all disc brake caliper press ratchet wheels. Ideal for most large trucks and commercial vehicles. Be used on twin and quad piston fixed calipers, as well as single and twin piston floating calipers. The bigger ones more fit for some sextuplet pistons fixed calipers..
  • ✔【Satisfactory Customer Service】: AutoWanderer Tool specializes in high-quality auto parts and auto supplies kits. If there is any question with our products or during use, please feel free to contact us first, we are here to provide professional technical support ASAP in 24h and will do our best for your satisfaction..
Check Stock

G2 Brake Caliper Paint Set High Temperature High Gloss Self Leveling Brush On Brake Calliper Paint System Kit (Red Fire)

  • This top-of-the-line BRAKE Caliper Paint System Set from G2, is the most complete and easy-to-use kit available and includes everything necessary to paint four (4) standard sized brake calipers or two (2) drums in your driveway or professional performance shop..
  • G2 has specially contracted chemical engineers to research and develop our two-part paint which now offers the highest heat resistance on the DIY aftermarket (up to 980 degrees). Easily applied as a brush-on, the paint adds a great styling touch to any brake caliper ultimately highlighting already stylish show-through rims..
  • Each kit is hand-assembled and all of our materials are 100% made in the USA! Included is a high-performance aerosol caliper cleaner, mixing can, stirrer, application brush, installation instructions and a color decal..
  • The G2 High Temperature Brake Caliper Paint System Set contains approximately 3 1/2 liquid oz. of paint and approximately 1/2 liquid oz. of reactor, yielding 4 liquid oz. total when mixed, which will cover four (4) standard brake calipers or two (2) brake drums. However if you have over-sized calipers on the front of your vehicle and/or if you are planning on painting your brackets, rotor caps etc. you'll probably need two kits..
Check Stock