Top Brake Cable Guide Reviews

YESON Bike Cable Clips Plastic Bicycle Rotating S-Hook Clips,Bicycle Housing Tidy Wire Buckle Cycling Shift Cable Brake Gear Cable Housing Fixing Holder Guide MTB,10 pcs,Black

  • Made of plastic,Light weight and High quality,reusable and durable.
  • Length: 18.7mm(approx) C-C distance: 10.7mm(approx).
  • Suitable for brake cable, derailleur line,shift cable, Two halves can rotate 360 degrees , fit 4mm and 5mm housing.
  • Bike cable guide for brake cable and derailleur cross hooks, shift cable,Make your bike cable look clean and tidy,Handcuffed line buckle, rotate with your heart.
  • Application: Mountain bike,, road bike, folding bike, fixed gear bike, city bike etc..
Check Stock

Tektro HD-e350 eBike Hydraulic Disc Brake with 2Pcs 160/180mm Rotor

  • 【Electric Induction Control System】With power cut-off sensor, when braking, the signal is sent to the electronic control system to power off the motor. Cable length 190mm. Please pay attention to check whether the segment of the wiring port matches..
  • right rear 1850mm. This hydraulic disc brake is only suitable for ebikes. 【Oil】Non-corrosive environmentally friendly mineral oil..
  • 【Caliper】 Forged aluminum body. Open system, 2 piston. Weight Front: 302g / Rear: 322g. 【Brake Lever】:Cast aluminum lever & bracket. Two-pieces clamp. 3 finger blade..
  • 【Rotor】Diameter 180mm. Thickness 1.8mm. Weight 150g each. Lightweight polygonal guide design. High heat dissipation and heat resistance. 【Pads】High-performance metal-ceramic composites, low noise resin pad..
  • Note: the rear calipers and lever came in separate pieces so you can route internally. The brake hose were already filled with brake fluid, so you need to be careful not to spill the brake fluid when you install it..
Check Stock

4 Pieces Brake Cable Universal Bike Inner Brake Cable Housing Kit Bicycle Brake Cable Replacement for Mountain and Road Bike Gear Kit (Black)

  • Brake cable set: come with a set of brake cable kit, you get 4 pieces inner brake cables, that enough replace for your old one in long life.
  • These set are compatible to mountain bike and road bike universal.
  • Brake cable size: the cable housing is 2.5 m in length and 5 mm in thickness, the front brake cable is 1.1 m in length, the rear brake cable is 1.7 m in length, coming with cable collar, cable end and O-ring.
  • The brake cable housing kit is wear-resistant and durable, help provide safety to the cyclist.
  • Quality material: the brake housing is made with strong PVC coat coming with stainless steel cable, which improves the smoothness of the brake housing, so it is smooth and resistant.
  • It can sustain high cable tension forces without splitting, helping to stop your bike instantly.
  • The shell is made of PVC material, with resistance to cold, heat and oxidation, not easy to deform, ensure the brake sensitive, suitable for most kinds of weather conditions of riding.
  • Applicable scope: bike housing and brake cables can be applied to mountain bike, road bike, small wheel bike, foldable bike, good for maintenance and upgrading of cables.
  • Note: please cutting off no need ended and wear tail-end cap, prevent to hurt yourself.
  • You will get: the housing replacement ....
Check Stock

Universal Bicycle Transmission Line Bicycle Shift Derailleur Cable and Brake Cable Kit for Bicycle Mountain Road Bike Repair Black

  • Quality material: bike shift derailleur cable and brake cable are made of PVC and stainless steel material, heat and rust resistant, they are durable to use for a long while, providing smooth using experience to your riding trip.
  • Variable speed cable set: 2 m transmission cable shell is 4 mm in thickness, front transmission length is 1.55 m, interior wire of rear variable speed is 2.2 m, their length can be clipped to a proper size that meets your needs.
  • Brake cable: 2.5 m cable housing is 5 mm in thickness, front brake cable length is 1.1 m, rear brake cable length is 1.8 cm, they are wear resistant to provide safety to cyclist.
  • Ample quantity: you will receive 1 piece 2 m transmission cable shell (4 mm), 2 pieces inner variable speed cable, 1 piece 2.5 m brake wire outer tube (5 mm), 2 pieces inner brake cable, 6 pieces O rings, 8 pieces tail ends, 8 pieces brake copper sleeves, 21 pieces cable ferrules, large amount of quantity.
  • Applicable scope: bike shifter and brake cables can be applied to mountain bike, road bike, small wheel bike, foldable bike, good for maintenance cables. Note: because the brake line is double-headed, each head fits to different types of bicycle, you can clip inappropriate end off..
Check Stock

Universal Bicycle Transmission Line Bicycle Shift Derailleur Cable and Brake Cable Kit for Bicycle Mountain Road Bike Repair (White)

  • Quality material: bike shift derailleur cable and brake cable consist of PVC and stainless steel material, which are durable, heat and rust resistant, can be applied for a long time, providing smooth using experience to your riding trip.
  • Variable speed cable set: 2 m transmission cable shell is 4 mm in thickness, front transmission length is 1.55 m, interior wire of rear variable speed is 2.1 m, their length can be clipped to a proper size that meets your needs.
  • Brake cable: 2.5 m cable housing is 5 mm in thickness, front brake cable length is 1.1 m, rear brake cable length is 1.7 cm, they are wear resistant to provide safety to cyclist.
  • Ample quantity: you will receive 1 piece 2 m transmission cable shell (4 mm), 2 pieces inner variable speed cable, 1 piece 2.5 m brake wire outer tube (5 mm), 2 pieces inner brake cable, 6 pieces O rings, 8 pieces tail ends, 8 pieces brake copper sleeves, 20 pieces cable ferrules, large amount of quantity.
  • Applicable scope: bike shifter and brake cables can be applied to mountain bike, road bike, small wheel bike, foldable bike, good for maintenance cables. Note: because the brake line is double-headed, each head fits to different types of bicycle, you can clip inappropriate end off..
Check Stock

Universal Bicycle Transmission Line Bicycle Shift Derailleur Cable and Brake Cable Kit for Bicycle Mountain Road Bike Repair (Red)

  • Reliable and durable: bike shift derailleur cable and brake cable are made of PVC and stainless steel material, they are heat and rust resistant, durable and can serve you for a long while, providing smooth using experience to your riding trip.
  • Variable speed cable set: 2 m transmission cable shell is 4 mm in thickness, front transmission length is 1.55 m, interior wire of rear variable speed is 2.1 m, their length can be clipped to a proper size that meets your needs.
  • Brake cable: 2.5 m cable housing is 5 mm in thickness, front brake cable length is 1.1 m, rear brake cable length is 1.7 cm, they are wear resistant to provide safety to cyclist.
  • Ample quantity: you will receive 1 piece 2 m transmission cable shell (4 mm), 2 pieces inner variable speed cable, 1 piece 2.5 m brake wire outer tube (5 mm), 2 pieces inner brake cable, 6 pieces O rings, 8 pieces tail ends, 8 pieces brake copper sleeves, 20 pieces cable ferrules, large amount of quantity.
  • Applicable scope: bike shifter and brake cables can be applied to mountain bike, road bike, small wheel bike, foldable bike, good for maintenance cables. Note: because the brake line is double-headed, each head fits to different types of bicycle, you can clip inappropriate end off..
Check Stock

TEKTRO M530 Linear Pull Brake, Black

  • Application: bike brakes kit,suitable for Children most bicycles,Height of break pad adjustable 20mm;See Figure 2 for detailed dimensions..
  • Material: The bike brakes kit is made of high-quality aluminum alloy, and the brake cable is also made of high-quality aluminum alloy. It is durable and can be used for a long time. It is resistant to cold, heat and oxidation, and is not easily deformed. It ensures that the brakes are sensitive and suitable for most weather conditions..
  • Product size: Front brake cable length: 55cm/21.65".
  • Rear brake cable length: 155cm/61.02".and the bicycle brake handle is suitable for handlebars with a diameter of 2.2 cm / 0.87"..
  • Easy to install: Quickly replace the old bicycle brake and tighten it with the corresponding brake fixing hole.
  • pass the brake wire through the brake wire tube in turn to fix the position of the metal wire tube.
  • then fix it on the bolt, install the brake pads, and adjust the distance of the brake wire , Position and length, and then fix the brake cable..
  • You will get: 2 pieces bike C shape brake, 1 pair aluminum bicycle brake lever brake housing, 1 pair cable brakes V type replacement set.
Check Stock

Bike Brakes, Hosrnovo Universal Aluminum Alloy V Shape Brake Levers with 2 Pieces Braking Cables, Replacement Full Set for Road Mountain Bicycle

  • Excellent quality: The brake shell is mainly made of aluminum alloy and plastic, and the V brake and brake lever parts are made of aluminum alloy. The material is sturdy and durable, cold-resistant, heat-resistant, not easy to rust and deform, ensuring that the brake is sensitive and suitable for use in most weather conditions. Please rest assured to buy..
  • Abundant accessories: This set contains 6 products. Including 2 pairs of black brakes, 1 pair of black aluminum alloy brake levers, 1 front brake cable and 1 rear brake cable. At the same time, screws and accessories are provided to solve the problems and troubles caused by bicycle brakes..
  • Appropriate size: The arch of the bicycle brake is about 110 mm/4.3 inches. The brake pads are 55 mm/2.1 inches. The length of the front brake cable is about 72cm, and the length of the rear brake cable is about 175cm. The bicycle lever brake is suitable for handlebars with a diameter of 2.2 cm/0.87 inches. This product is suitable for bicycles with a wheel outer diameter of 24 or 26 inches. It is suitable for most bicycles. Please confirm whether your car is suitable before buying..
  • Easy to install: First, tighten the brake fixing holes corresponding to the body fixing holes. Then pass the brake wire through the b....
Check Stock

Hiland Mountain Bike 27 Speeds Lock-Out Suspension Fork Aluminum 19.5 inch Frame 27.5 inch Wheel Hydraulic Disc-Brake for Men Women Mens MTB Bicycle

  • 【High tech Frame】Hiland Slycan has a high quality ultralight aluminum frame with internal shift cable and brake hose routing, which can help your....
  • 【Brake&Shifter】Dual Powerful hydraulic disc brakes are more efficient than mechanical disc brakes. It provide you better durability and stopping....
  • 【Lock-Out】With a lockout fork can be utilized when riding downhill and on rough terrain. With the flip of a single switch the suspension can be....
  • 【Assembly Guide】85% pre-assembled,easy to assemble, assembly tools included.If you have any questions about the bike, please do not hesitate to....
  • 【Size Guide】SIZE S suits riders between 5'1" & 5'7".
  • SIZE M suits riders between 5'5" & 5'10".
  • SIZE L suits riders between 5'8" & 6'2"..
Check Stock

EASTERN POWER 2 Pcs Bicycle Teflon Brake Cables, Road Bike Brake Cable

  • Slick road bike brake cable with Teflon layer is strong enough to ensure safe cycling..
  • The bicycle brake cables are 1.7m long and available for modulation to meet your desired length, while the brake cable ends will help you to fix the incision..
  • Bike Inner brake cables are compatible with Shimano and Sram brakes and matches well with both front and rear brake cable housing..
  • Bicycle break cables are universal replacements for front and rear Road Bike disc brake cables..
  • Package: 2 * bike Teflon brake cable with End Tip, 4 * cable end cap..
Check Stock

BESNIN Chain Guide ISCG-05/ISCG-03 Mountain Bike Chain Guide Bike MTB Chain Guide for 1x System (ISCG-03)

  • Lightweight enclosed chain guide and bash guard for 1x system. .Material: Alloy 6061-T6 CNC +Plastic Accessories.
  • Special attention: The Chain Guide cannot touch the chain and crank. Please see our 2th picture for details. if the chain guard touched the chain or crank will damage . You need to adjust the installation direction of the chain guard according to your chainring..
  • it will prevent rocks, boulders and protruding roots from damaging the drivetrain of your mountain bike and take the fun for your ride..
  • works out perfectly which reduced the weight, plus it guards the bottom brake cable and shifting cable..
  • range:32t~40t .Material: Alloy 6061-T6 CNC +Plastic protective made made,is very sturdy and durable.If you have any questions, please feel free to contact us..
Check Stock

EASTERN POWER Bicycle Brake Cable & Housing Mountain Bike Brake Cables Set Universal Bike Brake Cables for MTB/Road Bike White

  • Stainless Steel bike inner brake cables are available for modulation, while the cable end caps will help you to fix the incision..
  • PTFE coated brake cable housing is 2450mm long, enough to meet your desired length..
  • Size: Brake cable length- 1.1m(front)/1.7m(rear).
  • Brake cable housing- 5mm( Diameter)/2.45m(Length)..
  • Universal Use: Bicycle brakes cable & Housing are suitable for both mountain bike and road bike..
  • Package Includes: 1 x Brake Cable Housing.
Check Stock

YAKAMOZ 2-in-1 Universal Bike Bicycle Shift Derailleur Cable & Brake Cable Housing Replacement Kit for Moutain Road Bike Cycling Repairing

  • Stainless steel strong PVC coated cables for more shift and brake power and smooth operation.
  • Shift Cable: 2m shift cable housing(OD 4mm), front shift cable- 1.55m, rear shift cable-2.1m,long enough to custom the shift cables length.
  • Cable ferrules, cable ends, and S-buckles included.
  • Brake Cable: 2.5m Cable housing(OD 5mm), Front Brake cable- 1.1m, Rear Brake Cable-1.7m.
  • Made of PVC material, low temperature & intense heat resistant. Durable, and this shift and brake cable set will add better performance for your bicycle..
  • Ideal replacement for Mountain bike(MTB), BMX, Road bikes, Kids' Bikes, Folding bikes, DIY Cable pipe installation and etc..
Check Stock