Top Bottom Tap Spiral Flute Reviews

Champion Cutting Tool Heavy Duty Spiral Point Tap:XL22-5/16-18-Made in USA (12 per pack)

  • Heavy Duty Spiral Point Taps thread quickly, accurately, and last longer when tapping steel and other tough alloys. Made in USA.
  • Ideal for through holes applications since spiral point quickly shears and ejects chips ahead of the tap.
  • Special necked design for deeper, trouble free tapping and less tap breakage. Surface treated premium high speed steel for longer tool life..
  • For tapping all through hole applications in low and high carbon steel, stainless steel, alloyed steels, steel drop forgings, grey cast iron, titanium, nimonic alloys, manganese, sprint steels, and other tough alloys.
Check Stock

Champion Cutting Tool Heavy Duty Spiral Point Tap:XL22-3/8-16-Made in USA (12 per pack)

  • Heavy Duty Spiral Point Taps thread quickly, accurately, and last longer when tapping steel and other tough alloys. Made in USA.
  • Ideal for through holes applications since spiral point quickly shears and ejects chips ahead of the tap.
  • Special necked design for deeper, trouble free tapping and less tap breakage. Surface treated premium high speed steel for longer tool life..
  • For tapping all through hole applications in low and high carbon steel, stainless steel, alloyed steels, steel drop forgings, grey cast iron, titanium, nimonic alloys, manganese, sprint steels, and other tough alloys.
Check Stock

BOSCH BSPE6D 12Piece Steel Spiral Flute Screw Extractor Set

  • LONG SERVICE TIME---The tap extractor 3/4 flute is made of superior high speed steel, which is of high hardness and anti-corrosion, could be used for quite a long period.
  • 3/4 FLUTE SPECIFICATION---1#: 3 flute, M4, 6#.
  • SUITABLE FOR---The tap extractor 3/4 flute works for removing stripped, rusted, broken, or corroded screws and bolts, Suitable for industrial screw and bolt removal and for everyday home repair work.
  • SPECIFICALLY ENGINEERED---With each tap extractor specifically engineered, the tap extractor 3/4 flute could grab speedily, and could grab broken screw taps out easily.
  • QUALITY GUARANTEEING---Every tap extractor gets through rigorous quality testing, and unqualified one will be removed, durable to use. Please feel free when using.
Check Stock

Walton 18003 6-Piece 4 Flute Tap Extractor Set With Square Shank

  • LONG SERVICE TIME---The tap extractor 3/4 flute is made of superior high speed steel, which is of high hardness and anti-corrosion, could be used for quite a long period..
  • 3/4 FLUTE SPECIFICATION---2#: 3 flute, M5.
  • SUITABLE FOR---The tap extractor 3/4 flute works for removing stripped, rusted, broken, or corroded screws and bolts, Suitable for industrial screw and bolt removal and for everyday home repair work..
  • SPECIFICALLY ENGINEERED---With each tap extractor specifically engineered, the tap extractor 3/4 flute could grab speedily, and could grab broken screw taps out easily..
  • QUALITY GUARANTEEING---Every tap extractor gets through rigorous quality testing, and unqualified one will be removed, durable to use. Please feel free when using..
Check Stock

Steel Tap Extractor Set M4 M5 M6 M7 M8 M9 Broken Head Taps Remover Stripped Screw Tap with Box 6 Piece

  • ❤ LONG SERVICE TIME---The tap extractor 3/4 flute is made of superior high speed steel, which is of high hardness and anti-corrosion, could be used for quite a long period.
  • ❤ 3/4 FLUTE SPECIFICATION---1#: 3 flute, M4, 6#.
  • ❤ SUITABLE FOR---The tap extractor 3/4 flute works for removing stripped, rusted, broken, or corroded screws and bolts, Suitable for industrial screw and bolt removal and for everyday home repair work.
  • ❤ SPECIFICALLY ENGINEERED---With each tap extractor specifically engineered, the tap extractor 3/4 flute could grab speedily, and could grab broken screw taps out easily.
  • ❤ QUALITY GUARANTEEING---Every tap extractor gets through rigorous quality testing, and unqualified one will be removed, durable to use. Please feel free when using.
Check Stock

Be91eiter Damaged Screw Extractor Set, 22 PCS Stripped Kit for Broken Bolt All-Purpose HSS Remover Set with Magnetic Extension Bit Holder & Socket Adapter, Silver

  • ❤ LONG SERVICE TIME---The tap extractor 3/4 flute is made of superior high speed steel, which is of high hardness and anti-corrosion, could be used for quite a long period.
  • ❤ 3/4 FLUTE SPECIFICATION---1#: 3 flute, M4, 6#.
  • ❤ SUITABLE FOR---The tap extractor 3/4 flute works for removing stripped, rusted, broken, or corroded screws and bolts, Suitable for industrial screw and bolt removal and for everyday home repair work.
  • ❤ SPECIFICALLY ENGINEERED---With each tap extractor specifically engineered, the tap extractor 3/4 flute could grab speedily, and could grab broken screw taps out easily.
  • ❤ QUALITY GUARANTEEING---Every tap extractor gets through rigorous quality testing, and unqualified one will be removed, durable to use. Please feel free when using.
Check Stock

QWORK Tap Extractor 4 Flute Broken Head Screw Remover Stripped Tap Extractor Set Steel 3 Types 5 Pcs

  • LONG SERVICE TIME---The tap extractor 3/4 flute is made of superior high speed steel, which is of high hardness and anti-corrosion, could be used for quite a long period..
  • 3/4 FLUTE SPECIFICATION---2#: 3 flute, M5.
  • SUITABLE FOR---The tap extractor 3/4 flute works for removing stripped, rusted, broken, or corroded screws and bolts, Suitable for industrial screw and bolt removal and for everyday home repair work..
  • SPECIFICALLY ENGINEERED---With each tap extractor specifically engineered, the tap extractor 3/4 flute could grab speedily, and could grab broken screw taps out easily..
  • QUALITY GUARANTEEING---Every tap extractor gets through rigorous quality testing, and unqualified one will be removed, durable to use. Please feel free when using..
Check Stock

OCGIG 11 PCS Damaged Broken Screw Extractor Drill Bit Bolt Stud Remover Tool Kit Set

  • Made from Chrome vanadium steel, High hardness.
  • Drill bits' diameters and recommended extract diameters of broken screws are etched on case.
  • Aggressive left handed(extractors) and righted handed(drill bits) spiral flute design for extra gripping power.
  • Ideal to remove damaged, rusted or stripped screws, studs, bolts, fastener, metal water tap and water tube, etc.
  • Note:First drill a dragon on the broken screw with an electric drill, then gently tap the extractor into the hole and use a wrench to rotate counterclockwise to take it out.
Check Stock

TOMMARS 35PCS Bolt and Screw Extractor Set incl. Drill Bit Kit Multi-spline & Sprial Extractors Remover Easy Out Tool for Broken Stripped Screws, Studs, Bolts ect.

  • For quickly removing stripped or broken screws, socket screws, studs and broken off bolts without damaging surrounding area..
  • The extractors are made of higher qualilty CR-MO steel, which has high hardness good toughness, higher strength than chrome vanadium steel. The Drill Bits are made of 4241HSS materials. NOTE: drill bits should not be used for stainless steel..
  • Widely Application: Spiral flute extractors for using on common fasteners where lower torque.
  • Multi-spline Extractors for using on higher torque or lower profile tools. HSS Drill Bits for drilling out the interior of the fastener..
  • Set includes: 6 PCS Spiral flute extractors ( 3/32″ to 7/8″).
  • 13 PCS Multi-spline extractors ( 1/8″ to 1/2″ ).
  • 16 PCS HSS drill bits ( 5/64″ to 1/2″).
  • Can be used with electric hand drill, flat or allen wrenches, tap adapters. Must be slow and gentle when used!!!.
Check Stock

Drillco 4570E Series High-Speed Steel Taper Pin Reamer, Helical Flute, Round Shank, Uncoated (Bright)/Black Oxide Finish, 1 Size, 2-15/16\ Length

  • High-speed steel tools are good for most general purpose applications, offering a combination of hardness and toughness for wear resistance.
  • Available in uncoated (bright) and black oxide finish.
  • Round shanks allow use with a wide variety of toolholding systems.
  • Square shank allows hand (straight and spiral flute) reamers to be held in a tap wrench or vise, depending on whether the reamer of the part is rotated.
Check Stock

uxcell Machine Tap #6-32 UNC Thread 2B Class 3 Flutes High Speed Steel Screw Threading Milling Tap 5pcs

  • Tap Size: 3/8"-16 BSW thread, H2 tolerance. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy..
  • Material and Finish: M35 cobalt high-speed steel tool (5% Co) is with high hardness (up to around 67HRC) and toughness for wear resistance. Features just the base substrate without any additional coatings, great for wide ranges of applications..
  • Applications: Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause damage to the tap due to uneven force..
Check Stock

uxcell Spiral Flute Threading Tap 10-32 UNF, HSS (High Speed Steel) Titanium Plated Machine Thread Screw Tap 3 Flutes Tapping Tool H2 Tolerance

  • Tap Size: 10-32 UNF thread, H2 thread tolerance grade. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads, fast tapping with accuracy..
  • Material and Finish: High speed steel tool features high hardness and toughness, heat resistance, good for general purpose applications. Titanium Plating for wear resistance, corrosion resistance, rust protection..
  • Applications: Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause breakage to the tap due to uneven force..
Check Stock

uxcell 5/16\-18 BSW Spiral Flute Thread Tap, Machine Threading Tap HSS-Cobalt Uncoated, Round Shank with Square End, H2 Tolerance

  • Tap Size: 5/16"-18 BSW thread, H2 tolerance. Spiral flute design, upward chip removal. Right hand thread cutting, clear threads without burrs, fast tapping with accuracy..
  • Material and Finish: M35 cobalt high-speed steel tool (5% Co) is with high hardness (up to around 67HRC) and toughness for wear resistance. Features just the base substrate without any additional coatings, great for wide ranges of applications..
  • Applications: Suitable for processing blind holes and sticky materials. Great for drilling and tapping aluminum, die steel, stainless steel, bronze, hard plastics, etc..
  • Easy to Use: Used on drilling machines, tapping machines, CNC and milling machines. Use with tapping oil to get higher quality threads and more durable taps..
  • Tips: Machine taps are suggested to be used with tap collets with overload protection. Hand use is easy to cause damage to the tap due to uneven force..
Check Stock