Top Bosch 1617evs Router Motor Only Reviews

BOSCH MRP23EVS 120-Volt 2.3 HP Electronic Plunge Base Router

  • Power: The Bosch MRP23EVS Plunge Base Router Features a Powerful 15 Amp Motor Which Produces 10000 – 25000 Rpm and 2.3 HP (Max Tool).
  • CONTROL: The router features a trigger control system with the power switch located on the handle for enhanced user control and convenience.
  • ADJUSTABLE: Bosch’s Afterlock microfine bit-depth adjustment allows for easy and precise adjustments at any plunge setting. The variable speed dial....
  • ACCURACY: The router’s smooth plunge action, spring-lock plunge lever, and depth rod provide easy and precise plunge routing. Bosch’s Constant....
  • CONVENIENT: The MRP23EVS router comes complete with an always-on LED light for enhanced visibility in bit area as well as a cord swivel for added....
Check Stock

POWERTEC 71392 Trim Router Table

  • Bundle Includes: JessEm Rout-R-Lift II Router Lift for Porter Cable, Dewalt and Bosch Routers with 3.5" Diameter Motors and JessEm 10-Piece Insert Ring Set with Caddy for Router Plates and Lift Systems.
  • Compatibility: This model is designed for use with Porter Cable 690/890, DW 610/616/618, Bosch 1617/1618, or any other routers with 3.5" diameter motors.
  • Double-Sealed Ball Bearing: Thanks to the a double sealed bearing to the spindle, the Rout-R-Lift II can smoothly raise and lower your motor with ease.
  • Lift Shafts: The shafts are attached to the top plate and fasten in place with more than one screw spreading the lateral load and providing a very rigid and durable mount that will withstand the toughest routing operations.
  • Sturdy Construction: All the machined components on the Rout-R-Lift II are CNC machined for durability.
Check Stock

Ryobi A25RS42 Decorative Router Bit Set (4-Piece)

  • Measures 9-1/4" x 11-3/4" (235mm x 298mm).
  • 3/8" thick (9.5mm) phenolic insert plate.
  • Comes w/ predrilled holes and mounting hardware to fit the Porter-Cable 690/890 Series, and Bosch 1617.
  • Alignment marks make it easy to center and mount on almost any router.
  • Available in 3 versions: undrilled, pre-drilled for Triton, and pre-drilled for Porter-Cable and Bosch.
Check Stock

Bosch 1617EVSPK 12 Amp 2-1/4-Horsepower Plunge and Fixed Base Variable Speed Router Kit with Benchtop Router Table and Deluxe Router Edge Guide

  • Bundle includes Bosch 1617EVSPK Router, RA1181 Benchtop Router Table, and RA1054 Deluxe Router Edge Guide.
  • Electronic variable speed plunge and fixed base router kit.
  • soft start, micro-fine depth adjustments.
  • Benchtop table includes 2 adjustable featherboards, dust collection port, dual outlet switch and 6-foot power cord.
  • Guides cut along the workpiece or up to 8" in from edge..
Check Stock

Bosch 1617EVSPK Wood Router Tool Combo Kit - 2.25 Horsepower Plunge Router & Fixed Base Router Kit with a Variable Speed 12 Amp Motor and RA1181 Benchtop Router Table

  • Bundle contains Bosch RA1181 Benchtop Router Table and 1617EVSPK 12 Amp 2-1/4-Horsepower Plunge and Fixed Base Variable Speed Router.
  • Bentop includes 2 adjustable featherboards, dust collection port, dual outlet switch and 6-foot power cord.
  • Aluminum fence with MDF face plates and aluminum router mounting plate.
  • Electronic variable speed plunge and fixed base router kit.
  • soft start, micro-fine depth adjustments.
Check Stock

JessEm 02310 Rout-R-Lift II Router Lift with Microjig Grr-Ripper 3D Pushblock Bundle (2 Items)

  • BUNDLE INCLUDES: JessEm Rout-R-Lift II Router Lift with Microjig GRR-Ripper 3D Pushblock.
  • COMPATIBILITY: This model is designed for use with Porter Cable 690/890, DW 610/616/618, Bosch 1617/1618, or any other routers with 3.5" diameter motors.
  • DOUBLE-SEALED BALL BEARING: Thanks to the a double sealed bearing to the spindle, the Rout-R-Lift II can smoothly raise and lower your motor with ease.
  • LIFT SHAFTS: The shafts are attached to the top plate and fasten in place with more than one screw spreading the lateral load and providing a very rigid and durable mount that will withstand the toughest routing operations.
  • STURDY CONSTRUCTION: All the machined components on the Rout-R-Lift II are CNC machined for durability.
Check Stock

Bosch 1617EVSPK 12 Amp 2-1/4-Horsepower Plunge and Fixed Base Variable Speed Router with RA1054 Deluxe Router Edge Guide With Dust Extraction Hood & Vacuum Hose Adapter

  • Bundle includes Bosch 1617EVSPK 12 Amp 2-1/4-Horsepower Plunge and Fixed Base Variable Speed Router Kit with 1/4-Inch and 1/2-Inch Collets and RA1054 Deluxe Router Edge Guide With Dust Extraction Hood & Vacuum Hose Adapter.
  • Electronic variable speed plunge and fixed base router kit.
  • soft start, micro-fine depth adjustments.
  • Guides cut along the workpiece or up to 8" in from edge.
  • Easily converts into circle guide for making arcs and circles up to 32" in diameter.
Check Stock

Taytools 300005 Universal Router Base Plate, 6-1/2 Inch Diameter, 5/16 Inch Thick, Fits most 1-2 HP Porter Cable, Ryobi, Bosch, Makita, Sears, Fein, Milwaukee, Freud, Hitachi, Elu and Dewalt Routers

  • Base includes predrilled holes to fit virtually every standard router on the market (except Bosch 1617)1.
  • Has 1-3/16” center hole to accept Porter Cable style guide bushings.
  • 5/16” thick x 6-1/2” diameter clear acrylic plate provides optimum visibility of work.
  • Comes with centering pin for accurate aligning of the base plate to center of router.
  • Comes with replacement screws to fit most router bases.
Check Stock

BOSCH 11316EVS SDS-Max Demolition Hammer, Bosch Blue

  • Power: Featuring a 14.0 Amp Motor and Constant Response Circuitry for Soft Start, Constant Speed Under Load, and Protection Against Overload. The Bosch 11316EVS Provides 12.4 Ft. Lbs. of Impact Energy and No Load Bpm 900 1,890.
  • CONVENIENT: Featuring the SDS max bit system for tool free bit changes with automatic bit locking, dust protection and maximum impact energy transfer rate. Vario Lock positioning locks chisel into 12 different positions for optimum hammering angles.
  • VERSATILE: With a variable speed dial, the tool allows for controlled chipping applications and can be adjusted to match the impact force with the material being removed.
  • RELIABLE: The Bosch 11316EVS features a Service Minder light to indicate when preventative maintenance is required.
  • COMFORT: This demo hammer weighs only 23 pounds and has a 360 degree auxiliary handle and a padded rear handle for added user comfort during extended periods of work.
Check Stock

BOSCH PR20EVS Router Tool, Colt 1-Horsepower 5.6 Amp Electronic Variable-Speed Palm Router

  • PR20EVS Colt Palm Router features a 1.0 Horse Power 5.6 amp variable speed motor with speeds from 16,000 to 35,000 RPM.
  • CONVENIENT: Provides a straight edge guide to lead router along edges of work piece or up to 3-5/8 inch from edge.
  • The wood router also features an angled cord exit to keep the cord out of the way when working.
  • DURABLE: The rugged aluminum fixed base of the wood router is durable, solid and precise.
  • The PR20EVS features unique finger support pockets for additional stability, especially when trimming edges.
  • PRECISION: The fast and precise depth adjustment system allows both macro and micro adjustment while the quick clamp system allows motor to be easily adjusted or moved from base to base.
  • VERSATILE: The PR20EVS provides enhanced bit capacity with a fixed base that accepts bits up to 1 5/16 inch in diameter.
  • Versatile bit changing system allows for fast, easy bit changes using two wrenches or spindle lock and one wrench.
Check Stock

BOSCH PR20EVS Router Tool, Colt 1-Horsepower 5.6 Amp Electronic Variable-Speed Palm Router

  • PR20EVS Colt Palm Router features a 1.0 Horse Power 5.6 amp variable speed motor with speeds from 16,000 to 35,000 RPM.
  • CONVENIENT: Provides a straight edge guide to lead router along edges of work piece or up to 3-5/8 inch from edge.
  • The wood router also features an angled cord exit to keep the cord out of the way when working.
  • DURABLE: The rugged aluminum fixed base of the wood router is durable, solid and precise.
  • The PR20EVS features unique finger support pockets for additional stability, especially when trimming edges.
  • PRECISION: The fast and precise depth adjustment system allows both macro and micro adjustment while the quick clamp system allows motor to be easily adjusted or moved from base to base.
  • VERSATILE: The PR20EVS provides enhanced bit capacity with a fixed base that accepts bits up to 1 5/16 inch in diameter.
  • Versatile bit changing system allows for fast, easy bit changes using two wrenches or spindle lock and one wrench.
Check Stock

POWERTEC 71022 6-1/2-Inch Universal Router Plate

  • Features: the 6-1/2” clear universal Router plate is pre-drilled for easy mounting onto most popular routers on today’s market. A unique construction of clear Hardened acrylic means you can easily view your work-piece while you are routing. A 1-3/16” center hole enables use with PORTER-CABLE style Guide bushings. A convenient center pin – for use with a guide Bushing – is included to ensure solid and centered attachment to your router. Its 5/16″ Thick acrylic makes for optimal durability..
  • VERSATILE COMPATABILITY: Accommodates to the following router makes/models: Porter-Cable (690 series, and models 7529, 8529), Bosch (1617, 1618), Craftsman (315 275 000, 315 175 040, 315 175 050, 315 175 060, 315 175 070), Fein (FT 1800), Milwaukee (5615, 5616, 5619), Makita (RF1101), Hitachi (M8V, M-12VC, TR12), Elu (177), DeWALT (DW621, DW616 series, DW625, DW618), Ryobi (R1631K), and other models with like specifications..
  • Applications: allows you to use PORTER-CABLE style Guide bushings for greatly increased precision and ease of use. Porter-cable style Guide bushings not included.
  • please see POWERTEC 71051 to order separately. Great for use as replacement plates, or as an upgrade to your existing router assembly..
Check Stock

JessEm ROUT-R-LIFT II ROUTER TABLE PACKAGE for PORTER CABLE/DEWALT/BOSCH

  • JessEm included all you need for a top of the line system which includes the Rout-R-Lift II all new router lift solution..
  • Includes: Rout-R-Lift II (comes with 3 insert rings, 1-3/8'', 2'', 2-1/2''), Mast-R-Fence III (04400), Mast-R-Top (03006), Rout-R-Table Stand (05005),....
  • Compatible with Porter Cable 690/890, Bosch 1617/1618, DeWalt 610/618, Craftsman 17543/17540/28190..
Check Stock