Top Boron Carbide Stone Reviews

Master Lock M930XKADLH Magnum Heavy Duty Solid Steel Padlock with Key

  • maximum security lock with Tough-Cut octagonal boron-carbide shackle is best used as a gate lock, shed lock, and....
  • Lock is constructed with solid steel for increased strength and security.
  • protective bumper for scratch resistance.
  • Five-pin cylinder and dual ball bearing locking mechanism provides maximum pick and pry resistance.
  • Tough-Cut octagonal boron-carbide shackle is 50%....
  • 7/16 in. (11 mm) diameter shackle with 2 in. (51 mm) length, 15/16 in. (24 mm) width.
Check Stock

Master Lock M40XKAD Magnum Heav Duty Stainless Steel Discus Padlock with Key, Silver

  • maximum security lock with Tough-Cut octagonal boron-carbide shackle is best used as a storage unit lock, garage lock, shed lock, trailer lock, and moving truck lock.
  • Key lock is constructed with Tough-Cut octagonal boron-carbide shackle which is 50% harder than hardened steel.
  • shrouded design minimizes shackle exposure and protects against bolt cutter attacks.
  • Four-pin cylinder for maximum pick resistance.
  • reinforced body bumper for scratch resistance.
  • 3/8 in. (10 mm) diameter shackle with 5/8 in. (16 mm) length, 1-1/32 in. (28 mm) width.
Check Stock

Master Lock M530XQLH Magnum Solid Steel Keyed Alike Padlocks, 1-3/4 in. Wide, 4 Pack Keyed-Alike

  • maximum security lock with Tough-Cut octagonal boron-carbide shackle.
  • best used for residential gates & fences, sheds, workshops & garages, storage lockers, tool boxes and more.
  • Lock is constructed with solid steel for increased strength and security.
  • protective bumper for scratch resistance.
  • Four pin cylinder and dual ball bearing locking mechanism provides maximum pick and pry resistance.
  • Tough-Cut octagonal boron-carbide shackle is 50% harder than hardened steel.
  • 9/32 in. diameter shackle with 2 in. length, 13/16 in. width.
  • extended shackle for application flexibility.
Check Stock

Master Lock M40XT Magnum Heavy Duty Stainless Steel Discus Padlock with Key, Pack of 2 Keyed Alike

  • maximum security lock with Tough-Cut octagonal boron-carbide shackle is best used as a storage unit lock, garage lock, shed lock, trailer lock, and moving truck lock.Note: Measure your door's backset, cross bore and thickness to ensure you find the right fit..
  • Key lock is constructed with Tough-Cut octagonal boron-carbide shackle which is 50% harder than hardened steel.
  • shrouded design minimizes shackle exposure and protects against bolt cutter attacks.
  • Four-pin cylinder for maximum pick resistance.
  • reinforced body bumper for scratch resistance.
  • 3/8 in. (10 mm) diameter shackle with 5/8 in. (16 mm) length, 1-1/32 in. (28 mm) width.
Check Stock

Dremel 729-01 Carving & Engraving Rotary Tool Accessories Kit, 11-Piece Assorted Set - Perfect for Use On Wood, Metal, and Glass

  • Turn your Dremel rotary tool into a versatile carving machine with the 11-piece carving & engraving micro accessory kit..
  • Kit includes a reusable storage case and a variety of accessories to allow you to carve, etch and engrave in a variety of materials including steel, wood, plastic, glass, stone, ceramic, and more..
  • Carving/Engraving Accessories: 105 1/32" Engraving Bit (x1), 106 1/16" Engraving Bit (x1), 107 3/32" Engraving Bit (x1), 108 - 1/32" Engraving Bit (x1), 7103 5/64" Diamond Wheel Point (x1), 7134 5/64" Diamond Wheel Point (x1).
  • Sharpening/Grinding Accessories: 83142 9/32" Silicon Carbide Grinding Stone (x1), 83322 - 1/8" Silicon Carbide Grinding Stone (x1), 83702 1/8" Silicon Carbide Grinding Stone (x1), 84922 3/16" Silicon Carbide Grinding Stone (x1), 85602 13/32" Silicon Carbide Grinding Stone (x1).
  • USA-BASED CUSTOMER SERVICE: Available by chat, email, phone or visit us at our service center in Racine, WI..
Check Stock

Stainless Steel Tumbling Media Pins - 0.047\ Diameter, 0.255\ Length (2 lb Pack)

  • CONTAINS - 1 lb. 60 Coarse Silicon Carbide Grit, 1 lb. 220 Medium Silicon Carbide, Grit, ½ lb. 500 Fine Silicon Carbide, ½ lb 1200 Aluminum Oxide Polish.
  • Stage 1 coarse grit to initially shape the raw stone.
  • stage 2 medium grit to smooth the surface of the stone.
  • stage 4 final polish to get your own stone.
  • Each step of the rock polishing supplie is packaged in a reusable bottle container,Comes with a small spoon for easy use..
  • Whether you are a professional rock tumbler or a beginner, warm instructions are provided. Rock tumbler grit and polish refill,universal grit, compatible with all rock tumblers.
  • If you don’t get the satisfactory polished stones or there is anything else you are dissatisfied with, please contact us by E-mail, and within 24 hours, we will do our best to satisfy you or give you a full refund while you don’t need to return the product..
Check Stock

MasterLock Excell Discus 4 Digit Combination 70mm Padlock

  • Padlock with Tough-Cut octagonal boron-carbide shackle, 50% harder than hardened steel.
  • Octagonal shackle fully shrouded design to minimize shackle exposure and protect against bolt cutter attacks.
  • Reinforced body bumper for scratch resistance.
  • Set-your-own 4-digit combination for convenience and security.
  • 10,000 possible combinations, Reset tool included.
Check Stock

Ullman Devices Ullman HT-55FL Extra Long Flexible Magnet Pick-Up Tool

  • Neodymium-iron-boron high-flux magnet lifts up to 8 lbs.
  • Designed with extra length and a strong rare-earth magnet to sweep and remove metals filings from Diesel truck fuel tanks.
  • Long aluminum shaft can be bent at any angle to retrieve metals objects in hard to reach areas.
  • Comfortable textured cushioned grip will not slip in wet or oily handsDescriptionFeatures: flexible Shaft, pickup Length 55 inches, pull capacity 5 lb., lifting capacity 5 lb., Aluminum and neodymium iron Boron magnet. Magnet designed to be used to pick up ferrous metal objects in hard to reach areas. Use for retrieval of ferrous metal. Ullman devices has been setting the industry quality standard for 81 years and is the worlds leading manufacturer of inspection mirrors and magnetic Pick-Up tools. Over the years, Ullman has broadened its product line to include socket holders, flexible spring Claws, screw Starters, rotating magnetic work lights, Carbide Scribers, hooks, Picks and various other specialty tools..
Check Stock

Spyderco - White Silver - DoubleStuff Sharpening Stone - Fine Ceramic Stone and Cubic Boron Nitride - 303FCBN2

  • Knife Sharpeners - All Spyderco Knife Sharperners share the same key qualities.
  • they are quick and easy to use, do not require oil, water, or complicated clamps and fixtures, and do not need electricity..
  • CUBIC BORON NITRIDE - Cubic Boron Nitride is a superabrasive that is second in hardness to diamond. It offers greater abrasion resistance and thermal conductivity, making it the preferred abrasive in many advanced industrial grinding applications..
  • Specifications - Overall Length (Inches): 5, Materials: CBN & Fine Ceramic Stone.
Check Stock

Dremel 84922 Silicon Carbide Grinding Stone

  • Turn your rotary tool into a powerful rotary grinder with Dremel's silicon carbide grinding stones.
  • Ideal for sharpening, deburring and general purpose grinding on harder materials.
  • Designed to work well on stone, glass, ceramic, porcelain, gemstones and non-ferrous metals.
  • What's Included: 3/16" Silicon Carbide Grinding Stone.
  • For use with rotary tools that can accommodate a 1/8" shank size.
Check Stock

Dremel 85422 Silicon Carbide Grinding Stone, Silver

  • Turn your rotary tool into a powerful rotary grinder with Dremel's silicon carbide grinding stones.
  • Ideal for sharpening, deburring and general purpose grinding on harder materials.
  • Designed to work well on stone, glass, ceramic, porcelain, gemstones and non-ferrous metals.
  • What's Included: 25/32" Silicon Carbide Grinding Stone (x1).
  • For use with rotary tools that can accommodate a 1/8" shank size.
Check Stock

SPEED TIGER ISE Carbide Square End Mill - Micro Grain Carbide End Mill for Alloy Steels/Hardened Steels - 4 Flute - ISE1/4\4T - Made in Taiwan (5 Pieces, 1/4\)

  • GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels, alloy steels, pre-hardened steels, hardened Steels, cast iron.
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance.
  • AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings.
  • HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory.
  • Great performance at a competitive price.
Check Stock

MasterLock 1178D Combination Padlock, Die Cast Body, 4 Pack Black/Silver (Keyed Different)

  • 4 Pack (Keyed Different) , MasterLock 1178D Combination Padlock.
  • ProSeries resettable combination locks are designed for Commercial/Industrial applications.
  • Set-your-own 4-digit combination for convenience and security.
  • Deadlocking mechanism protects against prying, shimming and rap attacks.
  • 2-1/4in (57mm) wide die cast body for strength and durability, 1-1/16in (28mm) octagonal boron-carbide shackle for excellent cut resistance.
Check Stock