Top Boron Carbide Sealing Ring Reviews

Master Lock M40XT Magnum Heavy Duty Stainless Steel Discus Padlock with Key, Pack of 2 Keyed Alike

  • maximum security lock with Tough-Cut octagonal boron-carbide shackle is best used as a storage unit lock, garage lock, shed lock, trailer lock, and moving truck lock.Note: Measure your door's backset, cross bore and thickness to ensure you find the right fit..
  • Key lock is constructed with Tough-Cut octagonal boron-carbide shackle which is 50% harder than hardened steel.
  • shrouded design minimizes shackle exposure and protects against bolt cutter attacks.
  • Four-pin cylinder for maximum pick resistance.
  • reinforced body bumper for scratch resistance.
  • 3/8 in. (10 mm) diameter shackle with 5/8 in. (16 mm) length, 1-1/32 in. (28 mm) width.
Check Stock

MasterLock Excell Discus 4 Digit Combination 70mm Padlock

  • Padlock with Tough-Cut octagonal boron-carbide shackle, 50% harder than hardened steel.
  • Octagonal shackle fully shrouded design to minimize shackle exposure and protect against bolt cutter attacks.
  • Reinforced body bumper for scratch resistance.
  • Set-your-own 4-digit combination for convenience and security.
  • 10,000 possible combinations, Reset tool included.
Check Stock

Ullman Devices Ullman HT-55FL Extra Long Flexible Magnet Pick-Up Tool

  • Neodymium-iron-boron high-flux magnet lifts up to 8 lbs.
  • Designed with extra length and a strong rare-earth magnet to sweep and remove metals filings from Diesel truck fuel tanks.
  • Long aluminum shaft can be bent at any angle to retrieve metals objects in hard to reach areas.
  • Comfortable textured cushioned grip will not slip in wet or oily handsDescriptionFeatures: flexible Shaft, pickup Length 55 inches, pull capacity 5 lb., lifting capacity 5 lb., Aluminum and neodymium iron Boron magnet. Magnet designed to be used to pick up ferrous metal objects in hard to reach areas. Use for retrieval of ferrous metal. Ullman devices has been setting the industry quality standard for 81 years and is the worlds leading manufacturer of inspection mirrors and magnetic Pick-Up tools. Over the years, Ullman has broadened its product line to include socket holders, flexible spring Claws, screw Starters, rotating magnetic work lights, Carbide Scribers, hooks, Picks and various other specialty tools..
Check Stock

SPEED TIGER ISE Carbide Square End Mill - Micro Grain Carbide End Mill for Alloy Steels/Hardened Steels - 4 Flute - ISE1/4\4T - Made in Taiwan (5 Pieces, 1/4\)

  • GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels, alloy steels, pre-hardened steels, hardened Steels, cast iron.
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance.
  • AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings.
  • HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory.
  • Great performance at a competitive price.
Check Stock

MasterLock 1178D Combination Padlock, Die Cast Body, 4 Pack Black/Silver (Keyed Different)

  • 4 Pack (Keyed Different) , MasterLock 1178D Combination Padlock.
  • ProSeries resettable combination locks are designed for Commercial/Industrial applications.
  • Set-your-own 4-digit combination for convenience and security.
  • Deadlocking mechanism protects against prying, shimming and rap attacks.
  • 2-1/4in (57mm) wide die cast body for strength and durability, 1-1/16in (28mm) octagonal boron-carbide shackle for excellent cut resistance.
Check Stock

MasterLock 1178D Combination Padlock, Die Cast Body, 8 Pack Black/Silver (Keyed Different)

  • 8 Pack, MasterLock 1178D Combination Padlock (Keyed Different).
  • ProSeries resettable combination locks are designed for Commercial/Industrial applications.
  • Set-your-own 4-digit combination for convenience and security.
  • Deadlocking mechanism protects against prying, shimming and rap attacks.
  • 2-1/4in (57mm) wide die cast body for strength and durability, 1-1/16in (28mm) octagonal boron-carbide shackle for excellent cut resistance.
Check Stock

MasterLock 1178D Combination Padlock, Die Cast Body, 3 Pack Black/Silver (Keyed Different)

  • 3 Pack, MasterLock 1178D Combination Padlock (Keyed Different).
  • ProSeries resettable combination locks are designed for Commercial/Industrial applications.
  • Set-your-own 4-digit combination for convenience and security.
  • Deadlocking mechanism protects against prying, shimming and rap attacks.
  • 2-1/4in (57mm) wide die cast body for strength and durability, 1-1/16in (28mm) octagonal boron-carbide shackle for excellent cut resistance.
Check Stock

THREE KEYS JEWELRY 8mm White Tungsten Carbide Ring Wedding Engagement Band Silver Multi Faceted Fashion Band Silver Size 10

  • Material: Genuine Tungsten Carbide - Scratch Proof.
Check Stock

SPEED TIGER ISE Carbide Square End Mill - Micro Grain Carbide End Mill for Alloy Steels/Hardened Steels - 4 Flute - ISE3/8\4T - Made in Taiwan (1 Piece, 3/8\)

  • GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance.
  • AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings.
  • HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory.
  • Great performance at a competitive price.
Check Stock

SPEED TIGER ISE Carbide Square End Mill - Micro Grain Carbide End Mill for Alloy Steels/Hardened Steels - 4 Flute - ISE1/8'4T - Made in Taiwan (5 Pieces, 1/8')

  • GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance.
  • AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings.
  • HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory.
  • Great performance at a competitive price.
Check Stock

SPEED TIGER ISE Carbide Square End Mill - Micro Grain Carbide End Mill for Alloy Steels/Hardened Steels - 4 Flute - ISE5/16"4T - Made in Taiwan (1 Piece, 5/16")

  • GENERAL APPLICATION CUTTER - Speed Tiger 600 Nano carbide tools excel at working carbon steels, alloy steels, pre-hardened steels, hardened Steels, cast iron.
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance.
  • AlTiBN COATING - Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings.
  • HIGH-QUALITY - Flutes ground by a world-class ISO-9001 Factory.
  • Great performance at a competitive price.
Check Stock

SPEED TIGER ICSM Chamfer End Mill- CNC Carving Bits V Groove 90 Degree 3/8 Diameter 3 OVL for Wood/Alloy Steels/Hardened Steels-Made in Taiwan 1 Piece 3/8 90°

  • GENERAL APPLICATION CUTTER - Speed Tiger carbide tools excel at working wood, aluminum, copper, MDF, carbon steels (~HB225), alloy steels (HB225~325), pre-hardened steels (up to HRC45), hardened Steels (HRC40~45), cast iron.
  • Ideal for Chamfering, Carving V Groove, Centering.
  • 90 Degree, Shank Diameter: 3/8", Full Length: 3”.
  • HIGH PERFORMANCE FOR HARD MATERIALS - Cutter is made of Micro Grain Carbide that is very tough, resists wear and offers high cutting performance.
  • ZrN-A COATING - Zirconium nitride (ZrN) +Titanium aluminum boron nitride (AlTiBN) coating lubricates the end mill for stability at high temperature and superior wear resistance at high cutting speeds, offering better heat resistance than TiAlN, TiN or TiCN coatings.
Check Stock

Vakki Mens Blue Center Tungsten Ring with Koa Wood Inlay 8mm Black Dome Wedding Bands Size 10

  • Blue Inlay: The center of the ring surface is inlaid with shiny blue inlay, making it a stunning look.
  • Hawaiian Koa Wood Inlay: The two sides of blue inlay are inlaid with Hawaiian koa wood, bringing you close to nature.
  • Material: Great craftsmanship with excellent tungsten carbide, durable and scratch-resistant.
  • Comfort Fit: This tungsten carbide ring is designed with a comfort fit inner surface face, which can give you a comfortable feeling when you wear it..
  • What You Get: 1pc tungsten carbide wedding ring, 1pc flannel ring bag, our 30-day size exchange or money back and lifetime guarantee and friendly customer service..
Check Stock