Top Boring Bar Coolant Adaptor Sleeve Reviews

ABN Coolant Funnel Kit Radiator Spill Free Funnel Auto Coolant Flush Kit No Spill Funnel Radiator Funnel Fill Kit

  • PERFORM TESTS & REFILL FLUIDS: The ABN | Cooling System Refiller Kit Coolant Burping Funnel Radiator Flush Kit prevents squeaky belts and spills when changing radiator coolant, flushing systems, vacuum filling, or replacing hoses.
  • Connects to radiator and seals for hands-free work so you can fill fluid level higher than radiator (allows for coolant expansion) to remove trapped air pockets or head gasket combustion leak bubbles that can otherwise cause cooling system errors and heater issues.
  • FITS YOUR VEHICLE: Antifreeze funnel kit works on any vehicle filled through the radiator (not the expansion tank).
  • The included straight extension and 45-degree elbows allow access to caps located under shrouds or in fender wells.
  • Works in any hard-to-reach area and can be combined to use on radiator caps that are placed at an angle.
  • BUILT TO LAST: 6.75-inch x 8.25-inch (17.1cm x 21cm) overall with 0.75-inch (1.9cm) outside diameter (OD) coolant fill funnel tip that securely fits the included adapters of different sizes.
  • While there are no measurement markings on the coolant spill free funnel, it can hold a maximum of approximately 70 ounces (2.1 L).
  • Constructed from opaque yellow hard-plastic components.
  • 3 out of 5 cap adaptors include steel rings to hold the ada....
Check Stock

MT2 Boring Shank, Mt2-1-1/2-18- (m10) Manganese Steel Boring Bar CNC Lathe Tool Inch Boring Head Shank Connecting Rod

  • HIGH-QUALITY MATERIALS: The boring bar is made of high-quality manganese steel to improve durability and service life..
  • SCOPE OF APPLICATION: Boring bar for CNC lathes with 1/2 "boring head. It can be used for boring, round, end face, step hole, inner hole end face, cutting inner hole and annular groove on the outer circle, etc..
  • ACCURATE THREAD: The thread of the boring bar is accurate and can be tightly connected with the boring head..
  • EXQUISITE WORKMANSHIP: The connecting rod of the British boring head handle is very smooth, professional and practical appearance design, easy to use..
  • HIGH STABILITY: MT2 bracket is stable, accurate and high stability, very stable during work, and reliable tools..
Check Stock

Champion Cutting Tool RotoBrute MightiBrute AC50 Portable Magnetic Drill Press Up to 2-1/8 diameter 2 depth of cut

  • Powerful, Lightweight: 33 lbs, Magnetic Strength: 3370 lbs, 2 Speed Motor: 450/300 RPM.
  • Cutter Capacity: 2-1/8" diameter, 2" depth of cut.
  • Recommended for use with Champion Cutting Tool Rotobrute Annular Cutters.
  • Quick change arbor allows for fast cutter change. Easily converts from annular cutters to twist drills with QX1234 drill/chuck adaptor..
  • Includes carrying case, hex keys, safety chain, external coolant bottle, safety guard, quick change arbor, removable handle, QX1234 drill/chuck adaptor.
Check Stock

9pcs 2 Boring Head R8 Shank 1/2 Carbide Boring Bar Set Milling

  • 2" Boring Head With R8 Shank.Head size: 2".Boring bar Hole: 1/2".
  • Cross Hole Dia: 1/2".Maximum Offset: 5/8".Thread: 1.5"-18.Graduations: 0.001/0-50.
  • A micrometer lead screw provides 0.0001" direct reading accuracy and ease of adjusting.
  • Packing including:1pcs 2" Boring Head, 1pcs R8 Shank, 9pcs 1/2" Carbide Boring Bar,3pcs Allen Wrench.
Check Stock

Evolution Power Tools EVOMAG42 1 5/8\ Diameter x 2\ Depth Magnetic Drilling System

  • 3/4" Diameter shank, fits most standard annular cutter styles.
  • Includes chuck and adaptor for twist drills up to 1/2" diameter.
Check Stock

ASZLBYM 5/8'' inch CNC Lathe Indexable Turning Tool Holder with Nickel Plated,CNC Heavy-Duty Metal Lathe Bit Set with Tin Coated Carbide Turning Inserts WNMG431 CNMG431 TNMG331 16ER AG60

  • ◆ UNIQUE: Boring Bar suitable for finishing and semi-finishing, good toughness..
  • ◆QUALITY: Boring Bar Lathe high strength and hardness, durable in use, improved the surface gloss of the cutting pieces.
  • ◆FUNCTION: Boring Bar Set suitable for machining steel, reduce the tool grinding cost and improve the cutting efficiency.
  • ◆APPLICATION: Lathe Tools Set tightly impacted bolt, simple structure, often used for small hole machining..
  • ◆GET: 2 Boring Bar( S12M-SDUCR07 + SDJCR1212H07 ) + 2 Wrench + 10 Carbide Inserts ( DCMT070204 ).
Check Stock

K-Swap Coolant Temperature Sender Sensor Adapter K20 K24 Engine Swap Fit for Honda Civic with Fittings Adaptor 3/8-1/8NPT

  • FUNCTION: To make sure that your cluster still keeps you informed of the Temperature of your engine you need to install this Adapter..
  • APPLICATION: This K-Swap Coolant Temperature sender Sensor Adapter Fit for Any k-swap engine k20 k24，Acura integra，Honda civic，Honda Crv，Accord，Crx，MR2..
  • FEATURES: This adapter replaces the OEM idle air assist vale (not used on K-Swaps) leaving you with the perfect spot to thread your sensor into..
  • PACKAGE INCLUDE: 1x Fitting Adaptor，1x Universal Coolant Temp Sender Sensor..
  • FREE RETURN AND WARRANTY: We accept free return and replacement if it is not the correct one. And Guarantee with One Year Limited Warranty..
Check Stock

ASZLBYM 3/4 Lathe Internal Boring Bar Turning Tool Holder S20R-MWLNR08 with Indexable Carbide Turning Insert WNMG432

  • ♥package : 1pc S20R-MWLNR08 boring bar+ 10pcs WNMG432 carbide insert + 1pc wrench..
  • ♥ S20R-MWLNR08 turning boring bar : the cutting direction：right hand , the turning tool bar is made of high-quality alloy steel with Nickel Cotated,which can effectively improve the wear resistance, corrosion resistance and stability of the turning tool bar, for long time use..
  • ♥WNMG432 carbide insert : inserts are made of carbide and the coating material is TiN ,it can be used for finishing or semi finishing steel ,the inserts has high hardness, low friction coefficient, good wear resistance and chemical stability ..
  • ♥The carbide inserts and turning boring bar are packed in plastic containers, safe and easy to store ..
Check Stock

YOYO TOOLS Lathe Turning Tools S08K-SCLCR06 Boring Bar and 5pcs CCMT060204 CCMT2 1.5 Carbide Inserts CNC Lathe Turning Tool S08K-SCLCR06 + 5pcs CCMT060204

  • CCMT060204 CCMT2(1.5) Carbide Inserts : carbide material with CVD coating ,used for machining stainless steel and steel parts.
  • Internal boring bar holder : High quality Steel Durable for Long , strong and durable ,95 degree right hand internal boring bar turning holder, the....
  • Shank Diameter : S08K-SCLCR06: 8mm/0.315'' , Overall Length: 125mm/4.92'' , T8 wrench , M2.5*6 screw , 95 degree right hand internal boring bar....
  • Widely Use: used for Cutting Steel parts and Stainless Steel, simple structure, often used for small hole machining..
  • Package Include : 1Pc S08K-SCLCR06 lathe boring bar with 5pcs CCMT060204 CCMT2(1.5)Carbide Inserts, T8 wrench, M2.5*6 screw.
Check Stock

SCITOO 2pc Water Pump Tool 32mm Fan Clutch Nut Wrench acd Water Pump Holder for BMW for Ford

  • FUNCTION: This coolant vacuum refill kit performs vacuum pressure test and coolant vacuum fill services. Use an extra vacuum pump to work with this airlift coolant refill tool to form a vacuum in the cooling system, then draws coolant into the radiator. Quickly refill the system with no air pockets or hotspots produced, avoid warping or other damage in engine. This cooling system vacuum purge & refill kit is widely suitable for various domestic and foreign cars, SUVs, vans and trucks.
  • MATERIAL & USAGE: cooling system coolant refill tool has taken reliable metal construction to ensure durability and good air sealing. Equip with splendid aluminum & brass manifold body with rubber-covered pressure gauge (Range:-30~0 inHg/-76~0 cmHg). Brass T-connector can connect with vacuum pump for vacuumizing, and two standard air plugs (American & European style) are provided. 60" long coolant filling hose with quick plug can be inserted into the manifold body for refilling coolant.
  • Antifreeze filler kit includes a O.D. 32mm rubber adapter and 3 sizes adapter sleeves, with O.D. 45mm 40mm and 35 mm, fit for most types of vehicles. The adapter sleeves can be attached on the adapter on refill tool, and then replace the radiator cap to seal the cooling system, to help rad....
Check Stock

Radiator Pressure Tester Vacuum Refill Tool Kit - 28PCS Coolant System Leak Tester and Pneumatic Purge Fill Set with Adapter Refill for Vehicle

  • 【Multi-Function】Integrating three functions as leak cooling system,coolant refilling and temperature measurement in one.Coolant Pressure Tester can not only detect internal engine leaks caused by blown head gaskets and cracked block or heads,but also external cooling system leak.The vacuum fills coolant tool automatically fills coolant and eliminates air pockets under vacuum to avoid engine distortion or other damaged.Thermometer to check if coolant temperature is too high.All in 1,more choices!.
  • 【Wide Applications】Cooling system pressure tester is equipped with 17 specific adapters and 1 universal tapered rubber adapter and 3 radiator cap test adapters and 2 connectors, compatible with most of domestic & imported vehicles and works on 99% of the coolant systems.Color code radiator tests caps make it easy to choose the suitable tests cap for the job of messy.A fascinating gift for car lovers and a useful set of tools for families..
  • 【Value for Money】Plastic covered premium brass manifold body, equipped with brass fittings, anti-corrosive and wearproof. 3" large dial gauge with index range 0 to 35psi (0 to 2.5bar), easy to observe, and normally -25 to -20inHg is right time to add coolant. 24" rubber resin material weave reinforced hose, featu....
Check Stock

CHAMDRILLHEAD DRILLING HOLDER .748 TO .783 RANGE, .748 SHANK

  • 13PCS 2" boring head set w/ R8 shank kit includes 9pcs 1/2" boring bars, 1pc R8 handle and 3pcs hex wrenches, all packaged in a solid box for easy storage and carry..
  • 2 Inch boring head with R8 shank, these tools are made of high quality steel with great match of hardness and toughness. Hard and durable for long lasting and trouble free use..
  • Center Distance bt 2 bottom hole: 0.60"..
  • A micrometer lead screw provides 0.0001" direct reading accuracy and ease of adjusting. Perfect for milling machines..
  • Used for processing inner hole surfaces, boring, boring outer circle, boring end face, boring ladder hole, boring hole end face, cutting hole and outer ring groove, etc..
Check Stock

YSTOOL Radiator Pressure Tester Coolant Vacuum Refill Kit 28PCS Automotive Cooling System Leak Test Pneumatic Water Tank Purge Fill Tool Set with Gauge Adapter Cap Universal for Auto Car Airlift

  • Three-in-one cooling system tool kit has 3 excellent functions: coolant pressure tester, coolant refilling & temperature measurement. Manual pump cooling system pressure tester can diagnose whether the radiator is leaking and help quickly bleed the waste coolant if needed. Pneumatic vacuum fill coolant tool vacuumizes to eliminate trapped air in minutes and refills cooling system with no air bubbles produced. Thermometer checks if the coolant temperature is too high. Fit for home & business.
  • 28PCS universal radiator tester pressure leak test set includes 17 color-coded radiator test adapter caps and a universal rubber cone adapter for almost all radiator openings on most vehicles at home and abroad. Another 3 radiator cap adapters and 2 connectors for radiator cap leak detection. All are well positioned in the case, complete in specifications and easy to assemble. Widely compatible with GM, BMW, VW, GMC, Porsche, Chevy, Dodge, JEEP, Chrysler and many other model car, truck & airlift.
  • Radiator manual pump pressure detector adopts premium aluminum cylinder and accurate shock-proof gauge design (3'' color-coded dial, 0-35PSI/ 0-2.5bar). Vacuum type coolant refiller takes reliable brass and plastic material. 21" & 18'' rubber hose with brass parts, anti-co....
Check Stock