Top Bore Hole Drill Rig Reviews

FTG USA Wood Countersink Drill Bit Set 6 Sizes Set Countersink HSS M2 Tapered Drill Bits, Quick Change Hex Shank Countersink bit, 2 Stop Collar, 1 Allen Wrench, Countersink Drill Bit for Woodworking

  • Countersink drill bit set for wood with tapered drill bit 3rd Party Tested HSS M2, 4 Flute countersink cutter #45 Carbon Steel tapered countersink set 6 sizes drill bits with countersink #4 (7/64"), #6 (9/64"), #8 (11/64"), #10 (3/16"), #12 (7/32"), #14 (1/4") Adjustable wood countersink, 2 Depth Stop Collar, 1 Hex Wrench (1/8" Allen Key). Counter-bore, and wood plugs sizes 1/2" and 3/8". Hex shank compatible with 1/4 inch standard Quick Change chuck including impact drills.
  • Wood drill bit set with adjustable 4 Flute Cutter counter bore chamfer angle 82 degree, smooth countersinking in hard and soft wood, tapered holes for screws. Adjustable countersink drill bit with quality built depth adjustable counter bore attaches to flat on shank with 2 hex screws for controlled pilot hole depth. Best adjustable wood countersink drill bits set ideal for woodworking. Countersink tool set made with countersink bits for wood, FTG 2341P tapered countersink drill bits.
  • Tapered drill bits pointed tip and wide flute for drilling fast, clean pilot hole, ensures tight fit for screws. Countersink hex drill bit set with tapered drill bit can be replaced with FTG replacement taper drill bits countersink for extended wood bit. Countersink drill bits for wood made to dri....
Check Stock

RYOBI Drill and Impact Drive Kit (95-Piece) with Carry CASE

  • KIT INCLUDES: 19 x Split Point Oxide Drill Bits, 1 x 1” Hex Shank Spade Bit, 4 x Carbide Tipped Masonry Drill Bits, 4 x Brad Point Drill Bits, 1 x 2-1/8“ Hole Saw, 1 x Hole Saw Mandrel, 5 x Hex Shank Nut Setters, 20 x 1” Insert Bits, 1 x Magnetic Bit Holder, 1 x Countersink, 1 x Center Punch, 1 x Hex Key, 1 x Carrying Case.
  • BLACK OXIDE COATING keeps some of these bits protected from corrosion and prolonged wear.
  • HOLE SAW MANDREL holds a hole saw and drill bit in place so you can bore holes for door knobs or locks with a power drill.
  • MAGNETIC BIT HOLDER holds drill bits for driving fasteners without a tool.
  • CARRYING CASE has mounting brackets and a handle for maximum storage and portability.
Check Stock

35mm Concealed Hinge Drilling Jig Hinge Jig Hole Forstner Guide Bit Boring Jig Hole Cutter Guide for Cabinet Hinges and Mounting Plates Woodworking DIY Tools

  • 【High Quality】The bore bit adopts superhard alloy that makes the cutting sharper ,chip removal unhindered with outstanding boring ability and excellent boring performance.
  • 【Concealed Hinge Boring Jig】Features a "V"-locator that works off of a center reference line and quickly locates drill center points for all brands of hinges and mounting plates..
  • 【Adjustable Hinge Hole】Bore diameter is 35mm. Special removeable depth stop design makes drill easier..
  • 【Easy to Use】Easily and conveniently dip cup hole on the wardrobe door or desk by yourself with the hinge drilling jig,Suitable for their own home operation,Even you are not professionals, you can quickly locates drill center points for hinges and mounting plates..
  • 【Wide Application】Working efficiently for various timber, plywood, veneer work, and the drill bit is suitable for drill press, pistol drill, bench drill, vertical drilling machine and so on..
Check Stock

C.S. Unitec EBM 352/3 PSA – 14 in. Capacity Concrete Core Drilling Rig with Anchor Stand – Wet Diamond Core Drill – 3-Speed for Concrete, Brick, Block, Asphalt, and Stone – Made in Germany – 110V

  • Heavy-duty, light-weight core drill rig with anchor stand – 14 in. diameter hole capacity – MADE IN GERMANY.
  • Powerful 20 amp, 110V motor for demanding use when wet drilling in reinforced concrete, stone, asphalt, marble, ceramic, walls, floors and more.
  • 3 speed gear box (230/500/1030 rpm load speed) concrete drill with oil bath gear box and mechanical safety clutch for optimal lubrication, reduced heat and increased user safety.
  • Only 77 lbs. (Rig & Motor) – Universal Tool Holder / Motor Slide Mount Allows for Easy Separate Mounting of Core Drill Anchor Stand from Drill Motor to Reduce User Fatique and Improve Hole Alignment (Motor Weight = 27.5lbs).
  • Machine integrated water supply with gardena style quick connect and adjustable valve for easy use with standard garden hose. GFCI over-current cut-off protection standard.
Check Stock

Irish Setter Work Men's 83912 Marshall 11" Pull-On Steel Toe Waterproof Work Boot,Brown,10 D US

  • Heavy-duty, light-weight hand-held core drill rig with 6" diameter hole capacity - Rig Mounted Kits Available- MADE IN GERMANY.
  • Powerful 15 amp, 110V motor for demanding use when wet drilling in reinforced concrete, stone, asphalt, marble, ceramic, walls, floors and more.
  • 3 speed gear box (600/1300/2800 rpm load speed) concrete drill with oil bath gear box and mechanical safety clutch for optimal lubrication, reduced heat and increased user safety.
  • Machine integrated water supply with gardena style quick connect and adjustable valve for easy use with standard garden hose. GFCI over-current cut-off protection standard.
  • Only 16 lbs., Collar Diameter 60mm collar for easy mounting, rig mounting kits available..
Check Stock

CS Unitec EBM 352/3 PSV -14 in. Capacity Concrete Core Drilling Rig with Vacuum/Anchor Stand- Wet Diamond Core Drill -3-Speed For Concrete, Brick, Asphalt, & Stone -MADE IN GERMANY (w/vacuum pump)

  • Heavy-duty, light-weight core drill rig with combination vacuum/anchor stand - can be used as either a vacuum or an anchor stand- 14 in. diameter hole capacity -MADE IN GERMANY (vacuum pump included).
  • Powerful 20 amp, 110V motor for demanding use when wet drilling in reinforced concrete, stone, asphalt, marble, ceramic, walls, floors and more.
  • 3 speed gear box (230/500/1030 rpm load speed) concrete drill with oil bath gear box and mechanical safety clutch for optimal lubrication, reduced heat and increased user safety.
  • Only 77 lbs. (Rig & Motor) - Universal Tool Holder / Motor Slide Mount Allows for Easy Separate Mounting of Core Drill Vacuum/Anchor Stand from Drill Motor to Reduce User Fatique and Improve Hole Alignment (Motor Weight = 27.5lbs).
  • Machine integrated water supply with gardena style quick connect and adjustable valve for easy use with standard garden hose. GFCI over-current cut-off protection standard.
Check Stock

Fulton 6 inch Long Forstner Bit Extension For Adding Over 5-5/8 inches of Drilling Depth To Your Forstner Bit. For Wood Turners, Furniture, Carpentry and Construction

  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed a heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet..
  • The forstner bit extension gives you additional 5-5/8 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill..
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers..
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstner bits only. ....
Check Stock

CS Unitec END 1550 P - 2-5/8' Capacity Concrete Core Drill - Wet Diamond Core Drill - for Concrete, Brick, Block, and Stone - Made in Germany - 110V

  • Heavy-duty, light-weight hand-held core drill rig with 2-5/8" diameter hole capacity - Rig Mounted Kits Available- MADE IN GERMANY.
  • Powerful 13 amp, 110V motor for demanding use when wet drilling in reinforced concrete, stone, asphalt, marble, ceramic, walls, floors and more.
  • 1800 - 4400 rpm load speed dial control - concrete drill with oil bath gear box and mechanical safety clutch for optimal lubrication, reduced heat and increased user safety.
  • Machine integrated water supply with gardena style quick connect and adjustable valve for easy use with standard garden hose. GFCI over-current cut-off protection standard.
  • Only 7 lbs., Collar Diameter 52mm collar for easy mounting, rig mounting kits available..
Check Stock

Fulton 10 inch Long Forstner Bit Extension for Adding Over 8\ of Drilling Depth to Your Forstner Bit Ideal for Wood Turners Furniture Carpentry and Construction (3/8 inch Collet)

  • Drilling with forstner bits to achieve a flat bottom hole or to start a deep hole turning project like on a larger vase or vessel is essentially impossible with a standard length forstner bit. To remedy this issue we have developed an extra long, heavy duty steel extension that allows you to secure a 3/8 inch shank forstner bit into the end collet..
  • The forstner bit extension gives you additional 8-1/2 inches of reach to bore deeper into your projects. This will help you create larger diameter starter holes or help when you need to drill in just a little further than the standard bit length will allow. The extension can be used with forstner bits on drill presses, lathes with a drill chuck installed (drill chuck not included) or with a power drill..
  • One of the most common uses for the forstner bit extension is for woodturners who need to bore out starter holes on larger vessels. However, the extension works exceptionally well for projects like salt shakers, pepper mills or even wood turned beverage mugs. Contractors use the extension when they need to bore deep holes for running cables or wires and they also use it for joining larger timbers..
  • The forstner bit extender is made from solid, heavy duty machined steel. It is designed to be used with forstne....
Check Stock

CS Unitec ETN 2001 P Up to 4\ 2-Speed Hand Held/Rig Mounted - Wet/Dry Concrete Core Drill - for Concrete, Brick, Block, and Stone - Made in Germany - 110V

  • Heavy-duty, light-weight hand-held core drill rig with 4" diameter hole capacity - Rig Mounted Kits Available- MADE IN GERMANY.
  • Powerful 15 amp, 110V motor for demanding use when wet drilling in reinforced concrete, stone, asphalt, marble, ceramic, walls, floors and more.
  • 2 speed gear box (0-800/0-1570 rpm load speed) concrete drill with oil bath gear box and mechanical safety clutch for optimal lubrication, reduced heat and increased user safety.
  • Machine integrated water supply with gardena style quick connect and adjustable valve for easy use with standard garden hose. GFCI over-current cut-off protection standard.
  • Only 15 lbs., Collar Diameter 52mm collar for easy mounting, rig mounting kits available..
Check Stock

CS Unitec END 130/3.2-6\ Capacity Concrete Core Drill - Wet Diamond Core Drill - 3-Speed For Concrete, Brick, Block, and Stone - MADE IN GERMANY - 110V (END 130/3.1 PO)

  • Heavy-duty, light-weight hand-held core drill rig with 6" diameter hole capacity - Rig Mounted Kits Available- MADE IN GERMANY.
  • Powerful 15 amp, 110V motor for demanding use when wet drilling in reinforced concrete, stone, asphalt, marble, ceramic, walls, floors and more.
  • 3 speed gear box (600/1300/2800 rpm load speed) concrete drill with oil bath gear box and mechanical safety clutch for optimal lubrication, reduced heat and increased user safety.
  • Machine integrated water supply with gardena style quick connect and adjustable valve for easy use with standard garden hose. GFCI over-current cut-off protection standard.
  • Only 16 lbs., Collar Diameter 60mm collar for easy mounting, rig mounting kits available..
Check Stock

Bushcraft Gear for Survival Settlers Bushscraft Hand Auger Wrench with Flint Scotch Eye Wood Drill Peg and Manual Hole Maker Multitool with leather Case Camping brown

  • EXCLUSIVELY SHARP: Made of high-quality hardened oxidized steel materials, settler wrench easy to drill,sharp and durable. Comes with professional welding technology to link the scottish eye cutter and wood drill bits.
  • thanks to Professional grinding for every spiral and scottish eye cutting point,aggressively sharp hand auger wrench to bore the perfect hole and peg.
  • TWO IN ONE FUNCTION: Comes complete with a leather sheath.
  • Manual hand drills not only will it bore a connector hole, but make the connection peg for you.
  • COMPACT AND CONVENIIENT: Use a stick through the eye for leverage making the scotch eye auger drill simple to drill a hole, then using protective wrap to protect your hands from cuts and allows you to make wood pegs more conveniently and quickly when using the sharp scottish eye cutter to hammer into a branch for a peg the same size as the hole drilled before.
  • BUSHCRAFT TOOLS AND CAMPING TOOLS: Carry this bushcraft gear when you're outdoors camping, hiking, backpacking, bushcrafting, EDC or building with primitive cabin tools in the wild, making an emergency shelter becomes a breeze. giving you a pleasan....
Check Stock

Snappy Tools Quick-Change 5-Pc. Countersink Drill Bit Set. Proudly Made in the USA.

  • In one step, you can drill, countersink and counter bore the perfect sized hole for #4, #6, #8, #10, or #12 screws..
  • Snappy Tools Countersinks will drill the pilot hole and countersink or counter-bore for screws in one step. Countersink to drive the head of the screw flush with or slightly below the surface.
  • Ideal for plugs or dowel buttons. The 1/4" hex shank can be used with power drills and quick-change chucks..
  • Experience the higher quality of Snappy Tools. Combining higher quality materials and patented technology, Snappy delivers industrial quality tools to the tradesman and do-it-yourself markets at an affordable price..
  • Includes 5 Gold Screw Countersinks: 5/64x3/8, 3/32x3/8, 7/64x3/8, 1/8x3/8 & 9/64x1/2.
Check Stock