Top Boot Puller Boot Remover Reviews

PAGOW Spark Plug Boot Wire Removal Tool Ignition Coil Puller for Volkswagenn Audi VW Hand Install Repair Tool

  • Best Compatibility: The spark plug wire puller installer can perfect match with Volkswagen and Audi vehicles with standard prong plug caps on each side (not recommended for non-VW/Audi plug leads). Volkswagen – New Beetle 2.0 engine AZJ (AEG), Golf IV & V 1.6 engine (AVH), 1993-2005 2.0L 4 cylinder (AZG), 1998-2006 1.8L 4 cylinder (BBW), 2006 and later 2.0L 4 cylinder turbo (BDC).
  • Audi – 1998-2006 1.8L 4 cylinder turbo (BEV), 2006 and later 2.0L 4 cylinder turbo (BGD)..
  • Size Inforamtion: The size of spark plug boot removal tool kit: 12.6inch (32cm) overall length, 3.75inch x 0.4inch x 1.2inch (9.5cm x 1cm x 3cm) handle, 9.25inch (23.5cm) shaft, 2.2inch x 0.8inch (5.6cm x 2cm) boot end..
  • Wide Applications: The spark plug puller tool suitable for Bora, Mercedes, Smart, and other Volkswagen and Audi vehicles with similar engines and standard prong plug caps on each side..
  • Easy to Use:Perform spark plug change when engine is cold to prevent the heads from stripping. After pulling the plugs, we recommend applying lubrication to make the job easier. When installing wires, refrain from pushing too hard without the tabs aligned on the tool to prevent the boot end from spreading and getting stuck..
  • Material:The handle of ignition coil puller is made of hard p....
Check Stock

Covey Sports Ski Boot Buckle Lever & Carrier Tote Bundled with Ski Boot Horn & Ski Boot Remover Tool, The Perfect Equipment Gear Bundle for Putting On, Carrying, Tightening & Removing Your Ski Boots

  • ULTIMATE SNOW SKI BOOT ACCESSORIES BUNDLE: With each package, you receive one Covey buckletite (buckle tightener & boot holders tool), one Ski Boot Sports Grip boot remover, & one ski boot horn to make your entire skiing & snowboarding outing a success.
  • TIGHTEN, CARRY & SCRAPE YOUR BOOTS The convenient Covey buckle tightener accessory solves three problems.
  • First, it makes latching & unlatching your boot buckles easier.
  • Second, it has a strap to work as ski boot holder carriers.
  • Third, it can scrape ice off the bottom of your boots.
  • GET YOUR BOOTS ON EASILY: The ski boot horn makes getting into your ski or snowboard boots & liners a cinch.
  • Each boot horn comes with instructions printed on the tool for easily getting your feet into your boot liner.
  • REMOVE YOUR BOOTS WITH EASE: The Ski Boot Sports Grip boot remover will save your back at the end of your day.
  • The boot gripper with long handle provides a safe alternative for taking off stubborn boots from a sitting or standing position.
  • ENTIRE BUNDLE MADE IN THE USA: All three products are proudly made in the US....
Check Stock

JobSite Premium Boot Puller - Rubber Grip Inlay - Shoe & Boot Remover (1 Unit)

  • HEAVY DUTY: Constructed out of Heavy-duty Plastic, Waterproof and UV Resistant - Dimensions: 13 x 4.5 x 2.5 inches.
  • WIDE TAPERED SLOT: This Boot Puller Remover has a wide open U shape and is designed to fit all types of Boots including Cowboy, Steel Toe, Rubber and Work.
  • RUBBER GRIP INLAY: Protects your footwear from getting scratched or scraped, while helping you remove your shoes without bending over.
  • GREAT FOR: Anyone struggling to remove their boots. Elderly, Disabled, Post-Surgery, those with Back or Hip Pain, Cowboys, Farmers, Construction Workers.
  • TRUSTED BRAND: 100% Manufacturer Money Back Guarantee.
Check Stock

JobSite Premium Boot Puller - Rubber Grip Inlay - Shoe & Boot Remover (2 Pack)

  • HEAVY DUTY: Constructed out of Heavy-duty Plastic, Waterproof and UV Resistant - Dimensions: 13 x 4.5 x 2.5 inches.
  • WIDE TAPERED SLOT: This Boot Puller Remover has a wide open U shape and is designed to fit all types of Boots including Cowboy, Steel Toe, Rubber and Work.
  • RUBBER GRIP INLAY: Protects your footwear from getting scratched or scraped, while helping you remove your shoes without bending over.
  • GREAT FOR: Anyone struggling to remove their boots. Elderly, Disabled, Post-Surgery, those with Back or Hip Pain, Cowboys, Farmers, Construction Workers.
  • TRUSTED BRAND: 100% Manufacturer Money Back Guarantee.
Check Stock

Earl Diamond Heavy Boot Puller Jack - Shoe & Boot Remover (Black & Brown)

  • PRODUCTION: Iron art, Handmade heavy duty beetle puller, cast iron reinforcement structure, modern look and durability..
  • BEETLE: Use to pry off muddy or snowy boots, hands / home gardening decoration artwork..
  • EASY TO USE: Convenient and easy to use, Boot Puller can help you take off your shoes or boots without bending over..
Check Stock

YSTOOL Front End Service Tool Set with Automotive Ball Joint Separator Tie Rod End Puller Pitman Arm Remover 5 PCS Removal Splitter Kit for Car SUV Light Truck Pickup

  • ...trusion. The stout forcing bolts surface adopts black oxidation treatment to prevent rust, grease the bolts up before using for smooth operation and protect the bolt thread, grease them up after using for better preservation..
  • This ball joint puller kit includes 1x ball joint separator, 1x tie rod end and ball joint remover, 1x conical pitman arm puller, 1x pitman arm and tie rod end puller, 1x pitman arm puller, and all the 5 tools are organized in a red blow molding case for easy storage and transportation. The 5PCS remove tools use C-shape, jaw shape and teardrop shape design, very simple, but can seat on the ball joint position tightly and provide very effective grip to fix the pullers..
  • According to your ball joint choose the compatible puller, insert the puller into the ball joint opening, aim the bolt at the ball joint, turn the bolt by using the right size ratchet wrench, squeeze the ball joint out. These ball joint pullers can easily remove the stubborn ball joint, pitman arm, idler arm, tie rod end, steering linkages and steering boxes on front suspension and steering system, and will not damage boot/sleeve and other parts..
  • Ball joints require regular maintenance and replacement on average 75,000 to 150,000 miles or it may cause inconven....
Check Stock

Dress Zipper Helper Zipper Puller Zipping Up Down Dress Yourself Zip Aid Tool Zipper Pull Assistant Zipper Pull for Dress (Black)

  • Dress zipper helper tool used to pull zippers on dresses and boot, help you to zip and unzip the dress by yourself.
  • Zipper puller helper suit for almost all dress zipper types(small and big zippers even on invisible zippers), makes garment easy to zip and unzip.
  • Dress zipper pull helper made of imitation pearl and metal,durable, elegant and sleek ,Length:70cm(29 inch).
  • Come with 1 pc zipper assist tool in a box.
  • Back zipper helper zip up any zipper stuff you can't help yourself, dress, boot, etc.
Check Stock

Velette Plastic Shoe Horn - Long Handle Shoe Horns for Seniors, Men, Women and Kids - 30 Inch Shoehorn Helper for Boots, Dress Shoes and Sneakers

  • SHOE HELPER - Get your shoes on in half the time it normally takes you with this long shoe horn, measuring 30 inches in length (also known as a shoe spoon, boot puller or shoe helpers to put on your shoes)..
  • LONG HANDLE - Our extra long shoehorns comes in two parts that 'click' together to help you get your shoes on. A long handled shoe horn is a great tool for assisting seniors, men, women, and even children!.
  • CONVENIENCE - These shoe horns for men and women can be kept at home or packed in your suitcase as a travel shoe horn. Great for anybody with mobility issues or for use as elderly assistance products..
  • QUALITY - Made with heavy-duty plastic that won't bend or break, this boot horn is built to last. Save your hands from unnecessary pinches the next time you put on a cowboy boot or dress shoe..
  • CUSTOMER SERVICE - We have designed this shoe horn for kids and adults so that everyone can get their shoes on easily and efficiently. For any questions or concerns, reach out to our 24/7 support team..
Check Stock

ABN Inner CV Axle Removal Tool - CV Axle Puller Slide Hammer Set with 5 lb Slide Hammer and CV Joint Puller Adapter

  • [Remove Front Wheel Drive Axles Easily] To replace or repair your CV axle joints easily, use the ABN FWD Axle Puller Slide Hammer Puller Set.
  • The CV joint puller adapter and large slide hammer bearing puller allow you to create added torque to loosen and remove stubborn axle shafts and water pumps.
  • [Fits Your Needs] Chrome-plated 23 x 5/8-inch hammer bar features a 5/8-inch x 18 threaded section to fit your adapters, while the slide hammer CV axle adapter has 48mm (roughly 2-inch) opening and a 2.5-inch depth to fit your needs.
  • [Easy to Use] Attach the inner CV axle puller to your axle slide hammer then position the adapter around the shaft behind the inner boot.
  • Slide the 5 lb hammer weight back and forth to create torque to pull out the axle.
  • Use lubricant fluid for added ease (not included).
  • [Safe for Your Vehicle] Slide hammer CV joint puller and attachment design focuses the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.
  • Pulls CV joints on 1986-current Taurus/Sable.
  • [Built to Last] Hardened hammer shaft provides strength and d....
Check Stock

KELEN Power Steering Pump Pulley Puller, Power Steering Pulley Puller/Installer, 12Pcs Power Steering Pulley Remover and Installer Set for Water Pump, Vacuum Pump Pulley Puller

  • Power steering pulley puller and installer kit is used for removing and installing pressed-on alternator ,power steering pump and other pulleys..
  • The pulley puller and installer kit is compatible with Late GM, Ford & Chrysler Engines,includes special adapters for GM 3.2 Quad 4 engines and Ford Modular engines..
  • Power steering pump pully puller is made of high carbon steel, long lasting and durable construction for a long service life.The power steering pulley remover and installer set is a must have kit for professional and home DIY mechanics..
  • The power steering pulley puller/installer equipped with a plastic carrying case, keep all tools well organized, allows for convenient storage and transportation..
  • We also know the power steering pump pully puller as power steering pulley puller tool,power steering pulley puller set,power steering pump pulley puller tool,power steering pulley remover installer,power steering pump pulley puller/installer,power steering pulley puller kit,power steering puller kit,pulley puller installer kit,pulley installer kit,pulley installer remover,power steering pump puller,and so on..
Check Stock

Velette Metal Shoe Horn - Long Handle Shoe Horns for Seniors, Men, Women and Kids - Shoehorn Helper for Boots and Shoes - Set of 2, Long (16.5 Inches) & Travel Size (7.5 Inches)

  • SHOE HELPER - Get your shoes on in half the time it normally takes you with this long shoe horn (16.5") and travel shoe horn (7.5"). Also known as a shoe spoon, boot puller or shoe helpers to put on your shoes..
  • ERGONOMIC DESIGN - Our shoe horn for kids and adults as well as seniors 2-pack is conveniently designed to assist with putting shoes on wherever life takes you! Keep the long handled shoe horn at home, and pack the travel size shoe horn on-the-go..
  • CONVENIENCE - These shoe horns for men and women can be used to get on difficult boots, dress shoes, or sneakers. Great for anybody with mobility issues or for use as elderly assistance products..
  • QUALITY - Made from heavy-duty metal that won't bend or break, this boot horn is built to last. Save your hands from unnecessary pinches the next time you put on a cowboy boot or tight shoe..
  • CUSTOMER SERVICE - We have designed this travel and long handle shoe horn so that everyone can put their shoes on with ease and efficiently. For any questions or concerns, reach out to our 24/7 support team..
Check Stock

ABN Front Wheel Drive Axle Pulley Attachment - CV Axle Removal Tool CV Joint Slide Hammer Adapter

  • [Remove Front Wheel Drive Axles Easily] To replace or repair your constant velocity (CV) axle joints, use the ABN Front Wheel Drive Axle Puller Attachment.
  • Inner CV axle puller designed to pull joints with hidden retaining rings from FWD vehicles.
  • [Works with Your Slide Hammer] The CV joint puller attaches to your slide hammer and allows you to create added torque to loosen and remove stubborn axle shafts and water pumps.
  • Fits slide hammers with 5/8-inch x 18 threads.
  • [Easy to Use] Attach the inner CV removal tool to your slide hammer then slide the adapter around the shaft behind the inner boot.
  • Use the slide hammer to create torque to pull out the axle.
  • Use lubricant fluid for added ease (not included).
  • [Safe for Your Vehicle] Unlike pry bars or CV axle fork tools, the CV shaft slide hammer axle attachments focus the added torque to the back of the housing to prevent damage to the roller bearing inside the joint.
  • Pulls CV joints on 1986-current Taurus/Sable.
  • [Built to Last] Heat-treated CV puller adapter with black oxide finish ensures optimal strength and durability while r....
Check Stock

Dent Puller,Car Dent Puller Removal Kit 2 Pcs Suction Cup Paintless Dent Repair Tool for Car,Glass,Tiles,Mirror and Mobile Phone Screen Disassemble

  • 【Dent Repair Kit】 A new combination of strong suction dent puller remover for car , you can instantly remove most dents from your car without damaging paint. The car dent puller kit contains 2 different size of the dent puller,1 x 4.5 inch Suction Cup, 1 x 2.25 inch suction cup can take care different areas of car dent..
  • 【Newest Design 】- This is a car dent remover tool specially designed for car elastic surface deformation repair.The maximum suction power reaches 180 lb and the small one reaches 130 lb, bottom of dent puller is made of high quality rubber, improved curved rubber design solves the traditional dent puller can't repair the concave surface of the car with curvature (Premise: Diameter of the body should be larger than the diameter of the bottom of the suction cup), the upgraded car dent remover suction is stronger!.
  • 【 Combination & Wide Application 2 Size】- Our dent repair kit offer 2 different sizes and suction power. you can pulling with the larger dent puller first, then work the small details with the smaller one, two size of the car dent puller will good take care of the different areas.It can be used not only for car dent repa....
Check Stock