Top Boom Microphones Reviews

Moukey Microphone Stand & 50ft XLR Microphone Cable Black 3-Pack

... stability even on uneven surfaces while requiring minimal floor space. Non-slip Rubber Feet are included protecting the floor and your stand. The painted steel can sustain years of continuous wear..
【Microphone Stand】Adjustable 2 Arms & 2 Mic Holders - Newly design supports this dual boom mic stand in holding 2 microphones at a time that makes group performance so much easier(Max load:2.2lb). The main stand can extend from 31.5 to 52 inches by quality height clutch, the boom arm is 30 inches with 360° rotation, the quick-release clamp helps it to be locked into position easily for both stand and sit using..
【Microphone Stand】Collapsible Stand - The boom microphone stand can much meet outside carry needs, it's lightweight equipment that can be folded, assembled, transported, and stored in a small place. Please note that adjusting the boom arm to the direction of any tripod leg is the optimal position to keep stable..
【Microphone Cable】High Fidelity - Made of oxygen-free copper (OFC) conductors, plus a PVC protective cover, which can effectively enhance signal clarity and reduce electromagnetic interference (EMI) and noise..
【Microphone Cable】Wide Compatibility - Designed for equipment equipped with 3-pin XLR connectors, such as microphon....

Check Stock

Microphone Stand, RenFox Adjustable Mic Stand Desk Suspension Scissor Arm Mic Boom Arm for Blue Yeti, Snowball & Other Mics for Professional Streaming, Voice-Over, Recording, Games

【Flexibility & Applicability】 The microphone boom arm can rotate 360 degrees left and right and Move up and down 180°. With its upgraded clamp and protective cushion, the microphone arm fits on tables up to 2.1 inches thick.This mic boom arm set also includes a 3/8” to 5/8” screw adapter to suit most microphones. The mic stand can work perfectly with Blue Snowball and most other microphones..
【Compatible Mic Shock Mount】The diameter of the microphone shock mount can be changed by adjusting O-rings on shock mount compatible various mic. Max diameter:1.77 inches. It can be used to hold your microphone, and isolates it from noises caused by vibrations and boom movement. (Note: Shock Mount only fit for some Blue Yeti)..
【Double Pop Filter & Mic Cap】Double layered stretchy nylon with a robust plastic outer ring for high performance, this pop filter can be bent or adjusted as needed with the flexible gooseneck connector. which can effectively intercept droplets,popping,crackling and breathing sounds to achieve perfect sound quality. The mic cap is thick and soft enough to lower impact forces and protect microphones..
【Complete Microphone Stand Set】 Our professional microphone stand set includes everything needed for studio recording....

Check Stock

GRIFFIN Microphone Stand Package of 5 with Vocal Unidirectional Mics & XLR Cables | Handheld Cardioid Dynamic Microphones for Home Studio Recording, DJ Live Streaming & Stage Singing | 20FT XLR Cords

TRIPOD MIC STAND WITH MIC MOUNT - KEEP YOUR MIC SAFE: Pro-grade stands for microphones offer top quality designed for stage performances, seminar presentations, church sermons, and more. The adjustable microphone stand tripod base is sturdier than a round base and harder to tip over. The lighter weight of the tripod base will help keep your wires from the damage caused by a heavy mic stand accidentally placed on top of the wire. Each studio mic stand will also have slip-resistant rubber feet..
TELESCOPIC MICROPHONE BOOM ARM, REMOVABLE MIC BOOM ARM: A perfect microphone stand for singing! Thanks to the microphone arm stands efficient design with 2 interlocking steel pipes, the telescopic boom arm allows you to reach further and provides more flexibility. It can also be removed and converted into a straight microphone stand. Max microphone holder height with boom: 88". Shaft length: 34" to 57". Mic stand boom arm length: 27" to 43". Leg spread width: 20.5"..
MIC ARM STAND INCLUDES PROFESSIONAL 20FT XLR CABLE (BY FAT TOAD): Featuring super low signal resistance, each of these 20 ft long mic cables offers superior clarity and freedom from outside noise interference promising an exceptional, impeccable sound, every time. Boasting oxygen-free, 20 AWG (Americ....

Check Stock

Microphone Stand, WOSTOO Mic Stand Desk Boom Arm Adjustable Suspension Boom Scissor Arm for Blue Snowball & Other Mics for Professional Streaming, Voice-Over, Recording, Games

...fectively. With its upgraded clamp and protective cushion, the microphone arm fits on tables up to 2.1 inches thick..
【Flexibility & Compatibility】 The microphone boom arm rotates 360 degrees and offers a horizontal reach of 27 inches. This mic boom arm suit includes a 3/8” to 5/8” screw adapter to suit most microphones. The microphone stand can work perfectly with Blue Yeti, Snowball and most other microphones..
【Excellent Shock Mount Effect】 The diameter of the microphone shock mount can be changed by adjusting O-rings on shock mount compatible various mic. Max diameter:2.05 inches. It can suspend your microphone, and isolate noises caused by vibrations and boom movement. (Note: The Mic Shock Mount Not fit for Bule Yeti)..
【Double Layered Pop Filter & Mic Cap】 Double layered stretchy nylon with a robust plastic outer ring for high performance, this pop filter can be bent or adjusted as needed with the flexible gooseneck connector. The mic cap is thick and soft enough to lower impact force and protect microphones..
【All-In-One】 Package includes 1 x microphone arm stand, 1 x table clamp, 1 x shock mount, 1 x mic holder/clip, 1 x pop filter, 1 x mic cap, 1 x metal screw, 5 x cable ties to reduce clutter, as well as 1 x phone holder fo....

Check Stock

Rockville Go Party ZR10 Live Street Performance Speaker with Mic with Stand with Tablet Clip

.... Leg Diameter: 0.75”. Leg Length: 12.6". Top Tube Diameter: 0.6”. Lower Tube Diameter: 0.78”. Steel Gooseneck Length: 11.4”.
Features of RVCLIP5: Rockville Universal Wireless Microphone Clip W/ Flexible Soft Plastic Construction and Copper Threading. This is a high quality clip for standard sized wireless microphones. Flexible and durable soft plastic construction. Clip Works With Mic Diameters of 1.18" – 1.38” inches (30mm - 35mm). High density copper threading 5/8" x 27. 5/8" diameter and 27 threads per inch (Fits standard wireless microphones by Rockville, Shure, Audio Technica, and other popular brands)..

Check Stock

Microphone Stand, WOSTOO Mic Stand Desk Boom Arm with Fill Light Professional Microphone Boom Arm Scissor for Blue Snowball & Most Other Mics for Live Streaming Recording Singing Home Studio

【Mic Arm Stand Kit】 Our mic boom arm set comes with an upgraded sturdy metal frame, which can not only give your microphones a reliable support but also can reduce noise and vibration effectively. With the protection cushion, this mic boom arm stand can fit on tables up to 2.1 inches thick..
【Extra Ring Light & Shock Mount】 The microphone arm specially combines a fill light with 3 modes and 10 brightness levels. This desk mic stand has a shock mount whose diameter can be adjusted to suit various mics by the O-rings (Max Diameter is 2.05 inches and Not for Blue Yeti).
【Great Flexibility & Compatibility】The microphone suspension boom arm can rotate 360 degrees while offering a horizontal reach of 27 inches, and includes a 3/8” to 5/8” screw adapter to suit most microphones. This mic arm stand works nicely with Blue Snowball and most other mics..
【Double-Layered Pop Filter & Mic Cap】 For higher performance, our mic stand boom also has a pop filter to prevent pops or breathing from hitting the mic. It is built with double layered stretchy nylon and a robust plastic ring. And the kit includes a foam mic cover to protect your mics..
【All-in-One Desk Boom Arm Kit】 This mic stand desk kit includes 1 x microphone arm stand, 1x fill light....

Check Stock

InnoGear Microphone Arm Stand, Heavy Duty Mic Arm Microphone Stand Suspension Scissor Boom Stands with Mic Clip and Cable Ties for Blue Yeti Snowball and Blue Yeti Nano(Large)

Space-saving: Unlike traditional mic stands, InnoGear mic suspension boom arm is foldable, which helps free up desk space. You can easily clip and unclip the boom arm from your desk..
Upgraded & Freely Position: This boom arm has a MAX reach of 38 inches horizontally and 37 inches vertically for your convenience. It allows you to freely position microphones within adjustable range and will not bounce up..
Sturdy Material & Improved Load-bearing: It is made of sturdy steel, the thickness of its arm tube is improved from 0.39 inches to 0.53 inches, it can bear MAX weight of 4.4lbs..
University Compatibility: 5/8" connector is compatible with many microphones like Blue Yeti, Blue Snowball, AT2020, AT2020USB+, AT2035, ATR2500-USB, ATR2100-USB, etc..
Premium Appearance: The built-in spring balance system looks more upscale and professional than other arms, which springs are exposed to the outside..

Check Stock

Neewer NW-35 Microphone Boom Arm Kit, Microphone Scissor Arm Stand with Mic Clip, Pop Filter and 3/8” to 5/8” Adapter, Compatible with Blue Yeti, Blue Snowball, etc

Enhanced Boom Arm: Made of solid steel, NW-35 Mic Boom Arm is durable with a maximum load capacity of 3.3lb (1.5kg). The C-clamp can securely fit onto a desktop up to 1.7” (45mm) thick for studio and home recordings.
NOTE: Blue yeti snowball yeti X microphone can be directly mounted on the arm stand via 3/8" to 5/8" screw adapter, please DO NOT use with the shock mount to avoid instability..
Flexible Positioning: The Mic arm is 360° rotatable. The two reinforced springs allow smooth angle adjustment for you to get the best positions with ease.
General Compatibility: The included 3/8” to 5/8” adapter is compatible with various shock mounts and microphones, including Blue Yeti and Blue Snowball.
Practical Accessories: Mic clip fits microphones 35mm in diameter and the double-layer pop filter effectively reduces air blasts for vocal recordings.
Package Contents: NW-35 Boom Arm, Desktop C-Clamp, NW (B-3) Pop Filter, Mic Clip, 3/8” to 5/8” Adapter.

Check Stock

SoloCast Boom Arm Mic Stand, Adjustable Suspension Boom Scissor Arm Stand for HyperX SoloCast Gaming Microphone by SUNMON

【Perfect Boom Arm】- Suspension boom arm stand suitablely fit your HyperX SoloCast microphone, you can easily adjust the mic to the suitable angle or height to show your perfect voice..
【Stability】- Mic boom arm is dual suspension springs on each boom arm, protects the SoloCast microphone from shaking, sinking and making noise..
【Mic stand】-The Mic Arm desk mount can be extended up to 26.8"/68cm. Max support weight is 3 Pound (1.4 KG)..
【Table Clamp Base】-Suspension boom arm comes with one desk clamp, can easily clip to any desktop up to 1.89"/4.8cm thick. The sponge on the base could protect your desk without any scratches when you swivel side screw..
【Package】- Included：1x HyperX SoloCast Microphone Stand, 1x Table mounting clamp, 1x Screw adapter (3/8" to 5/8" match most microphones and shock mount). Note: NOT INCLUDED STREAMING MICROPHONE..

Check Stock

NEEWER NW-088 Handheld Microphone Boom Pole Arm for Filming, 5 Section Telescopic Aluminum Portable Mic Arm with Built in XLR Cable & Red Twist Locks for Zoom Microphones, 2.8'-9.8' Adjustable Length

...ure locks between each section, which is easily locked and perfect for capturing clear sound sources while keeping the mic out of frames for filmmaking, TV broadcast, interviews, vlogging, and more..
【Built in XLR Cable】The portable mic boom pole arm features a pre inserted built in internal coiled XLR cable for microphones makes it faster and easier to set up and use with no hassle to carry around extra gear when recording. The female plug of the cable is in at the bottom of the rod, concealing the cable perfectly..
【Padded Handle】The handle is padded by a layer of thick foam, providing comfortable touch in use. Anti freezing and safety protection functions prevent the handheld mic arm from sliding during mobile recording and reduce the operator’s fatigue with long shoots..
【Lightweight and Sturdy】NEEWER handheld microphone boom arm is made of rugged aluminum alloy material, which is resistant to humidity and corrosion for outdoor field and studio recording. 35.27oz lightweight makes it easier to hold in hand and carry around, reducing the operator's fatigue due to long term working, it is durable and well balanced, great for interviews, small crew documentary, ENG, EFP, video production, field documentary, TV and film applications..

Check Stock

Neewer Microphone Arm Stand, Suspension Boom Arm Stand with Upgraded C-Clamp, Pop Filter, 3/8”–1/4” & 3/8”–5/8” Adapter, Mic Clip, Compatible with Blue Yeti Nano Snowball Ice, Ring Light, DLSR Camera

【Versatile Boom Arm Stand】 Constructed with solid steel, the boom arm stand can hold a device up to 4lb (1.8kg). Provided in the kit is a 3/8”–1/4” adapter for most DSLR cameras, ring lights, webcams, and action cameras, and a 3/8”–5/8” adapter that is compatible with Blue and other microphones.
【Upgraded C-Clamp Mount】 Redesigned for increased stability, the upgraded C-clamp features a wider base and a larger opening for desks up to 2.67”（6.8cm） thick. It also has a non-slip rubber pad to protect your desk from scratches and a hook for holding over-ear headphones.
【Flexible Angle Adjustment】 The boom arm offers 360° rotation and smooth movement in vertical and horizontal directions for flexible positioning—ideal for overhead photography, singing, podcasting, live streaming, video conferencing, and gaming.
【3 Microphone Accessories】 The kit comes with a mic clip that fits various condenser microphones in a diameter of 1.1” (2.7cm), a double-layered pop filter for eliminating plosives when recording vocals, and a foam windscreen that can reduce unwanted pop sound.
【Simple Cable Organization】 Five hook-and-loop cable straps tie the microphone cable, charging cable, or power cord along the boom arm to keep your des....

Check Stock

Amazon Basics Tripod Boom Microphone Stand with Clothespin Style Microphone Clip

Tripod boom microphone stand holds microphone securely in place (microphone clip sold separately).
Long boom arm with molded plastic counterweight for horizontal placement.
Clothespin-style microphone clip securely holds a mic in place.
Accommodates a wide variety of wired and wireless microphones.

Check Stock

InnoGear Microphone Arm Stand, Heavy Duty Mic Arm Microphone Stand Suspension Scissor Boom Stands with Mic Clip and Cable Ties for Blue Yeti Snowball Hyper X QuadCast SoloCast Fifine Gaming(Medium)

Space-saving: Unlike traditional mic stands, InnoGear mic suspension boom arm is foldable, which helps free up desk space. You can easily clip and unclip the boom arm from your desk. The desk clamp can clip to any desk up to 2 inches thick..
Upgraded Length & Freely Position: This boom arm has a MAX reach of 28 inches horizontally and 27 inches vertically for your convenience. It allows you to freely position microphones within adjustable range and will not bounce up..
Sturdy Material & Improved Load-bearing: It is made of sturdy steel, the thickness of its arm tube is improved from 0.39 inches to 0.53 inches, it can bear MAX weight of 3.5lbs..
University Compatibility: 5/8" connector is compatible with many microphones like Blue Yeti, Blue Snowball, AT2020, AT2020USB+, AT2035, ATR2500-USB, ATR2100-USB, etc..
Premium Appearance: The built-in spring balance system looks more upscale and professional than other arms, which springs are exposed to the outside..

Check Stock