Top Bolt on Torque Clamp Reviews

TOTALFLOW 2' TF-JB56 304 Stainless Steel Butt Joint Exhaust Muffler Clamp Band-2 Inch

Butt Joint exhaust Muffler clamp band 2". check product details below for other sizes..
Seal Muffler Inlets, outlets, elbow joints, pipe.
Uses a reaction block that transfers bolt torque into clamp strength.
Available in a wide range of styles and sizes.
Made from quality material. TOTALFLOW is a USA - California based company.

Check Stock

Slide-Co 241947 Bed Frame Rail Clamp with 1" Frame, Small, Zinc

Constructed of heavy gauge steel and solid steel bolt fastener.
Clamp and bolt fastener comes finished in a corrosion resistant, zinc plated finish.
Used with 1-1/4 inch x 1-1/4 inch wide bed frame L-angle material.
Hand tightening should be all that is necessary for setting bed frame width, but pliers can be used for tightening with slightly increased torque if frame halves keep spreading easily.

Check Stock

HPS Performance 316 Marine Stainless Steel T-Bolt Hose Clamp, fit 1-1/8\ ID hose, Range: 1.38\ - 1.57\ (316-SSTC-35-40)

100% marine grade 316 stainless steel band, bolt and nut. High strength superior welded construction..
Perform well in saltwater applications and offer better corrosion resistance than 304 T-bolt band clamp. Meets or exceeds SAE Spec. J1508 for T-Bolt clamps..
Effective range: 1. 38" - 1. 57" (35mm-40mm).
Rolled edges to protect soft hoses. 3/4 inch (19mm) band width..
Maximum Torque Spec 75 in. lbs. Recommend to use two clamps for wet exhaust application..

Check Stock

HPS Performance 316 Marine Stainless Steel T-Bolt Hose Clamp, fit 1.25\ ID Hose, Range: 1.5\ - 1.69\ (316-SSTC-38-43)

100% marine grade 316 stainless steel band, bolt and nut. High strength superior welded construction..
Perform well in saltwater applications and offer better corrosion resistance than 304 T-bolt band clamp. Meets or exceeds SAE Spec. J1508 for T-Bolt clamps..
Effective range: 1. 5" - 1. 69" (38mm-43mm).
Floating bridge and rolled edges to protect soft hoses. 3/4 inch (19mm) band width..
Maximum Torque Spec 75 in. lbs. Recommend to use two clamps for wet exhaust application..

Check Stock

HPS Performance 316 Marine Stainless Steel T-Bolt Hose Clamp Size # 196, fit 6.75\ ID Hose, Range: 7\ - 7.31\ (316-SSTC-178-186)

100% marine grade 316 stainless steel band, bolt and nut. High strength superior welded construction..
Perform well in saltwater applications and offer better corrosion resistance than 304 T-bolt band clamp. Meets or exceeds SAE Spec. J1508 for T-Bolt clamps..
Effective range: 7" - 7. 31" (178mm-186mm). SAE # 196..
Floating bridge and rolled edges to protect soft hoses. 3/4 inch (19mm) band width..
Maximum Torque Spec 75 in. lbs. Recommend to use two clamps for wet exhaust application..

Check Stock

HPS Performance 316 Marine Stainless Steel T-Bolt Hose Clamp Size # 68, fit 2.75\ ID Hose, Range: 3\ - 3.31\ (316-SSTC-76-84)

100% marine grade 316 stainless steel band, bolt and nut. High strength superior welded construction..
Perform well in saltwater applications and offer better corrosion resistance than 304 T-bolt band clamp. Meets or exceeds SAE Spec. J1508 for T-Bolt clamps..
Effective range: 3" - 3. 31" (76mm-84mm). SAE # 68..
Floating bridge and rolled edges to protect soft hoses. 3/4 inch (19mm) band width..
Maximum Torque Spec 75 in. lbs. Recommend to use two clamps for wet exhaust application..

Check Stock

HPS Performance 316 Marine Stainless Steel T-Bolt Hose Clamp Size # 108, fit 4\ ID Hose, Range: 4.25\ - 4.57\ (316-SSTC-108-116)

100% marine grade 316 stainless steel band, bolt and nut. High strength superior welded construction..
Perform well in saltwater applications and offer better corrosion resistance than 304 T-bolt band clamp. Meets or exceeds SAE Spec. J1508 for T-Bolt clamps..
Effective range: 4. 25" - 4. 57" (108mm-116mm). SAE # 108..
Floating bridge and rolled edges to protect soft hoses. 3/4 inch (19mm) band width..
Maximum Torque Spec 75 in. lbs. Recommend to use two clamps for wet exhaust application..

Check Stock

HPS Performance 316 Marine Stainless Steel T-Bolt Hose Clamp Size # 188, fit 6.5\ ID Hose, Range: 6.75\ - 7.06\ (316-SSTC-172-180)

100% marine grade 316 stainless steel band, bolt and nut. High strength superior welded construction..
Perform well in saltwater applications and offer better corrosion resistance than 304 T-bolt band clamp. Meets or exceeds SAE Spec. J1508 for T-Bolt clamps..
Effective range: 6. 75" - 7. 06" (172mm-180mm). SAE # 188..
Floating bridge and rolled edges to protect soft hoses. 3/4 inch (19mm) band width..
Maximum Torque Spec 75 in. lbs. Recommend to use two clamps for wet exhaust application..

Check Stock

HPS Performance 316 Marine Stainless Steel T-Bolt Hose Clamp Size # 32, fit 1-5/8\ ID Hose, Range: 1.89\ - 2.2\ (316-SSTC-48-56)

100% marine grade 316 stainless steel band, bolt and nut. High strength superior welded construction..
Perform well in saltwater applications and offer better corrosion resistance than 304 T-bolt band clamp. Meets or exceeds SAE Spec. J1508 for T-Bolt clamps..
Effective range: 1. 89" - 2. 2" (48mm-56mm). SAE # 32..
Floating bridge and rolled edges to protect soft hoses. 3/4 inch (19mm) band width..
Maximum Torque Spec 75 in. lbs. Recommend to use two clamps for wet exhaust application..

Check Stock

HPS Performance 316 Marine Stainless Steel T-Bolt Hose Clamp Size # 48, fit 2-1/8\ ID Hose, Range: 2.38\ - 2.68\ (316-SSTC-60-68)

100% marine grade 316 stainless steel band, bolt and nut. High strength superior welded construction..
Perform well in saltwater applications and offer better corrosion resistance than 304 T-bolt band clamp. Meets or exceeds SAE Spec. J1508 for T-Bolt clamps..
Effective range: 2. 38" - 2. 68" (60mm-68mm). SAE # 48..
Floating bridge and rolled edges to protect soft hoses. 3/4 inch (19mm) band width..
Maximum Torque Spec 75 in. lbs. Recommend to use two clamps for wet exhaust application..

Check Stock

HPS Performance Stainless Steel T-Bolt Hose Clamp Size # 44, fit 2\ ID hose SSTC-57-65 Polish 2.25\-2.56\ (57mm-65mm)

Clamp effective range: 57mm - 65mm (2.25 inch-2.56 inch).
Maximum torque specifications: 75 inch pounds.
Material: 304 stainless steel, includes nut and bolt.

Check Stock

TIKSCIENCE Universal Torque Arm Conversion Kit,Fit for Electric Bicycle E-Bike Front or Rear 2 Set

➤[Fitment] : This universal torque arm conversion kit fit for electric bicycle e-bike.This product is suitable for normal motor shafts, except for special shafts (the size of the motor shaft does not exceed 14mm).
➤[Excellent Function] : These versatile torque arms can be installed inside the frame/fork or outside.This torque arm will help prevent the motor from coming loose from the fork (front) or frame (rear) and also prevent the slotted axle from bending or breaking your dropouts..
➤[Durable Material] : The universal torque arm conversion kit is made of high quality antioxidant iron and aluminum. The surface is anodized to completely resist oxidation and corrosion, and to maintain a long-lasting, beautiful luster under light conditions..
➤[You Will Get] : 2 x Steel torque arm.
2 x Stainless steel nut and 5mm Allen bolt.
2 x Slotted electric motor C washer as pictured..
➤[About Service] : The universal torque arm conversion kit designed and manufactured meets stringent delivery standards, with precision inspections before shipment to ensure quality problems.The customer service period is 2 year. If you have any questions about our product, please reply to us by email and we will help you resolve any issues as soon as possible....

Check Stock

Venzo 1/4 Inch Drive Click Torque Wrench Set Ð 2 to 22 Nm Ð Bicycle Maintenance Kit for Road & Mountain Bikes, Motorcycle Multitool - Includes Allen & Torx Sockets, 4mm 5mm Extension Bar & Storage

ESSENTIAL: Too much tightening will deform bike parts. Too little torque would mean the parts are loose. The bike torque wrench is a must have tool for installing bolts and bike part..
CALIBRATED BEFORE PACKING: We understand the accuracy of the torque is very important, especially for those expensive carbon parts. All the torque wrenches are pre-calibrated in the factory. Please read the instruction carefully to avoid any damage..
ACCURATE: It is the torque wrench with a preset lock ring. Unlike others the presetting could be changed when turning the handle, the torque wrench comes with a lock ring to freeze the preset value. 1/4'' Torque Fix Set,.
GREAT FOR BIKE: Torque range: 2-24 NM is just great for bike parts such as seat clamp, stem bolts, headset bolt and disc brake rotors etc. Included bits: Hex allen Keys 3 /4 / 5 / 6 / 8 / 10 mm, plus 5mm and 4mm Longer Allen Key for easy use, T20, T25 and T30 Torque Tolerance in: Accuracy +/- 4%..
ORDER NOW, WORRY FREE! We're so confident about our product quality that we can provide 2-year warranty! Made in Taiwan. Note: Stop turning when you feel a 'click'. 'Click' means the torque has reached preset value..

Check Stock