Top Bolt on Exhaust Tip Reviews

Apeixoto 2.75 Inch Inlet Exhaust Tip 2.75 Inches Inlet 3.5 Inches Outlet 12 Inches Long Polished Stainless Steel Exhaust Tailpipe Tip Bolt On Design

  • Function: The Apeixoto exhaust tailpipe tip is used as a a proection to your vehicle’s exhaust pipes witn an outlet diameter of 2.75 inches. It will protect your your exhaust pipe from rust and corrosion under sunlight and rain..
  • Dimensions: The Apeixoto exhaust tailpipe tip has a standard 2.75’’ x 3.5’’x 12’’ dimension ( Inlet, Outlet and Length ). Please note that this tailpipe tip is only fit for the vehicles that is a 3 inches outlet diameter exhaust pipes..
  • Design: The Apeixoto exhaust tailpipe tip is constructed with stailess steel with polished surface. And the tip has a cut edge with nearly 20 degree cut. It makes your vehicle look much more shinny. And there is a little hole on button. It will help to drain water avoiding rust and corrosion..
  • Installation: Bolt on design and this tailpipe tip can be installed directly. Just make sure that this is is correct size for your exhaust pipes..
  • Warranty: 100% satisfaction. If you come across any issue or need any help for our Apeixoto exhaust tailpipe tip, feel free to ask and we are here to assists..
Check Stock

Exhaust Tip 5.00' Dia OD X 10.00' Long 2.50' inlet Slant Double Wall Stainless Blue Flame Wesdon Exhaust Tip

  • 【Dimension】 ID: 4″ OD: 10″ Length: 18″ Angled Roll Bolt Chrome.
  • 【Design】 Bolt-On installation and Angled Cut – Rolled Edge design. Small hole on the bottom of the exhaust tip facilitate the drainage of accumulated water and prolong the service life of the exhaust tip.
  • 【Material】 Made of High quality Stainless steel has very strong anti-corrosive, Never Rusty..
  • Professional installation is highly recommended.
  • 【Wide Application】 To ensure proper fit make sure your exhaust tailpipe INLET diameter is 4 Inch.
Check Stock

Upower 4' to 10' Exhaust Tip Mirror Polished 4 Inch Inlet 10 Inch Outlet Exhaust Tailpipe 18' Length Bolt-On 45 Degree Angle Cut Tail Pipe

  • 【Dimension】 ID: 4″ OD: 10″ Length: 18″ Angled Roll Bolt Chrome.
  • 【Design】 Bolt-On installation and Angled Cut – Rolled Edge design. Small hole on the bottom of the exhaust tip facilitate the drainage of accumulated water and prolong the service life of the exhaust tip.
  • 【Material】 Made of High quality Stainless steel has very strong anti-corrosive, Never Rusty..
  • Professional installation is highly recommended.
  • 【Wide Application】 To ensure proper fit make sure your exhaust tailpipe INLET diameter is 4 Inch.
Check Stock

Apeixoto Resonated Muffler Exhaust Tip 2.875 Inches Inlet 3.875 Inches outlet 9 Inch Length Polished Stainless Steel #304 for Most Cars Trucks Vans

  • Function: The Apeixoto resonated exhaust tip is used to make your vehicle sound more powerful and it will also make your vehicle looks more fancy with shinny looks..
  • Application: This Apeixoto muffler exhaust tip has an adjustable inlet. There are three bolts on the inlets to tighten the pipe and adjust its inlet diameter. This muffler exhaust tip can be applied for 1.75-2.5 inches piping..
  • Specification: The adjustable muffler tip have a adjustable inlet, the outlet is 3.875 inches and its total length is 9 inches..
  • Design: This Apeixoto resonated exhaust tip has a double wall design and there are some honeycomb like holes to enhance its performance. It will make your vehicle sound more aggressive and sporty. Its T304 SS material with polished surface make it look shinny and keep it from corrosion and rust. The adjustable bolt on design makes the installation easier..
  • Warranty: 100% satisfaction. If you come across any issue or need any help for our Apeixoto exhaust tailpipe tip, feel free to ask and we are here to assists..
Check Stock

AUTOSAVER88 3 Inch Inlet Exhaust Tip, 3' Inlet 6' Outlet 15' Long Exhaust Tip, Silver Stainless Steel Finish Tailpipe

  • Notice: Please measure the outlet diameter of your pipe prior before purchase this exhaust tip and it should not be larger than the inlet diameter of the exhaust tip (3 inches).
  • Dimension: Standard 3″ x 6″ x 15″ inlet,outlet, and overall length respectively. Universally compatible with vehicles which have exhaust pipes with an outlet diameter of 3 inches.
  • Not Just Make it Louder: Thicker inner wall design makes your vehicle sounds rumble and crackle, enjoy the driving pleasure brought by the sounds. Also the bolt-on design make it super easy to fastens to your exhaust pipe without any hassle..
  • Stylish Look: Stainless steel material made with chrome-plated finishing provides a stylish look for your vehicle instead of the rusted old tailpipe. Effective protect your tailpipe from dust, rain and rocks, also Prevent it from deformation and damage..
  • Daily Maintenance: To make this exhaust tip has a long-life service – Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Check Stock

Dsycar Universal 1.5-2.25 Inch Adjustable Inlet Exhaust Tips, Bolt-On Design Chrome Plated Stainless Steel Exhaust Tailpipe Tips (Silver Curved )

  • 【 Note 1 】Only fit 1.5’’-2.25’’ inlet pipes, please measure the outlet diameter of your pipe prior before purchase this exhaust tip. ( For all tailpipes, if the outlet size is 1.5 - 2.25 inch, then this exhaust tip can fit, no matter of your Year/Make/Model).
  • 【 Note 2 】Please check your original tailpipe's type. Straight tailpipe is for straight type, and curved tailpipe is for curved type. This one is suitable for curved exhaust pipes. (Pay attention: This exhaust tip is oval outlet, not round outlet).
  • 【 Note 3 】View product details with image,Understand the installation and size of the product, can view the other seven exhaust pipe products,Choose the right product size and your favorite color..
  • 【Easy to Install】 There is no need to replace any parts,No weld needed. No drill needed.Super Easy to Install! Three Bolt Fit the tip to your Pipe..
  • 【Car Decoration】Surface polishing process. More Car decoration can search Dsycar. Tips again, please measure your exhaust pipe diameter to make sure our products fit your vehicle..
Check Stock

2 Pcs Stainless Polished Muffler Exhaust Tip Finisher Compatible with 2016-2020 Honda Civic

  • Fits 2012-2020 Honda Civic With OEM Exhaust System (Will Not Fit Hatchback Sport or Si or Type-R).
  • Package includes: 2 x Exhaust Pipe Tip Finishers as Shown (Quantity 1 means 2 Exhaust Tips).
  • Made Of Stainless Steel Material in Nice Polished Chrome Finish.
  • Easy Installation- Direct Bolt-On To OEM Exhaust With Adjustable Screws.
  • Dramatically Enhance The Rear Appearance of your Car. Gives it a Sport Tone Right Away..
Check Stock

AUTOSAVER88 2.5 Inch Inlet Exhaust Tip, 2.5' Inlet 4' Outlet 9' Overall Length Stainless Steel Tailpipe Chrome Polished Exhaust Tips

  • Notice: Please measure the outlet diameter of your pipe prior before purchase this exhaust tip and it should not be larger than the inlet diameter of the exhaust tip (2.5 inches).
  • Dimension: Standard 2.5″ x 4″ x 9″ inlet,outlet, and overall length respectively. Universally compatible with vehicles which have exhaust pipes with an outlet diameter of 2.5 inches.
  • Not Just Make it Louder: Thicker inner wall design makes your vehicle sounds rumble and crackle, enjoy the driving pleasure brought by the sounds. Also the bolt-on design make it super easy to fastens to your exhaust pipe without any hassle..
  • Stylish Look: Stainless steel material made with chrome-plated finishing provides a stylish look for your vehicle instead of the rusted old tailpipe. Effective protect your tailpipe from dust, rain and rocks, also Prevent it from deformation and damage..
  • Daily Maintenance: To make this exhaust tip has a long-life service – Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Check Stock

GEATaaT Black Chrome Exhaust Tip Compatible With 2005-2022 Toyota Tacoma Replace# PT932-35180-02

  • Product Dimensions: 2-1/4In Inlet X 3-3/4In Outlet X 9In Long.
  • Slanted Tip Shape. 3 Bolt Clamping System, Inlet: 2.25 Inch, Outlet: 3.75 Inch, Length: 9 Inch. Cut Type: Slant Cut.
  • Resonated Tips Are To Enhance Sound Output.
  • 100 Percent Stainless Steel With Flat Black Finish.
  • Coated Stainless Steel Resonated Bolt-On Exhaust Tip- Black.
Check Stock

AUTOSAVER88 3 Inch Inlet Exhaust Tip, 3' Inlet 3' Outlet 12' Overall Length Stainless Steel Turn Down Tailpipe Chrome-Plated Exhaust Tips

  • Notice: Please measure the outlet diameter of your pipe prior before purchase this exhaust tip and it should not be larger than the inlet diameter of the exhaust tip (3 inches).
  • Dimension: Standard 3" x 3" x 12" inlet,outlet, and overall length respectively. Universally compatible with vehicles which have exhaust pipes with an outlet diameter of 3 inches.
  • Not Just Make it Louder: Thicker inner wall design makes your vehicle sounds rumble and crackle, enjoy the driving pleasure brought by the sounds. Also the bolt-on design make it super easy to fastens to your exhaust pipe without any hassle..
  • Stylish Look: Stainless steel material made with chrome-plated finishing provides a stylish look for your vehicle instead of the rusted old tailpipe. Effective protect your tailpipe from dust, rain and rocks, also Prevent it from deformation and damage..
  • Daily Maintenance: To make this exhaust tip has a long-life service - Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Check Stock

AUTOSAVER88 2.5 Inch Inlet Exhaust Tip, 2.5' Inlet 4' Outlet 12' Overall Length Stainless Steel Exhaust Tips Chrome-Plated Finish Tailpipe

  • Notice: Please measure the outlet diameter of your pipe prior before purchase this exhaust tip and it should not be larger than the inlet diameter of the exhaust tip (2.5 inches).
  • Dimension: Standard 2.5″ x 4″ x 12″ inlet,outlet, and overall length respectively. Universally compatible with vehicles which have exhaust pipes with an outlet diameter of 2.5 inches.
  • Not Just Make it Louder: Thicker inner wall design makes your vehicle sounds rumble and crackle, enjoy the driving pleasure brought by the sounds. Also the bolt-on design make it super easy to fastens to your exhaust pipe without any hassle..
  • Stylish Look: Stainless steel material made with chrome-plated finishing provides a stylish look for your vehicle instead of the rusted old tailpipe. Effective protect your tailpipe from dust, rain and rocks, also Prevent it from deformation and damage..
  • Daily Maintenance: To make this exhaust tip has a long-life service – Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Check Stock

AUTOSAVER88 2.5 Inch Inlet Exhaust Tip, 2.5' Inlet 3' Outlet 12' Overall Length Stainless Steel Exhaust Tips Chrome-Plated Finish Tailpipe

  • Notice: Please measure the outlet diameter of your pipe prior before purchase this exhaust tip and it should not be larger than the inlet diameter of the exhaust tip (2.5 inches).
  • Dimension: Standard 2.5" x 3" x 12" inlet,outlet, and overall length respectively. Universally compatible with vehicles which have exhaust pipes with an outlet diameter of 2.5 inches.
  • Not Just Make it Louder: Thicker inner wall design makes your vehicle sounds rumble and crackle, enjoy the driving pleasure brought by the sounds. Also the bolt-on design make it super easy to fastens to your exhaust pipe without any hassle..
  • Stylish Look: Stainless steel material made with chrome-plated finishing provides a stylish look for your vehicle instead of the rusted old tailpipe. Effective protect your tailpipe from dust, rain and rocks, also Prevent it from deformation and damage..
  • Daily Maintenance: To make this exhaust tip has a long-life service - Please Sweep away the welding debris, cement, oil, white ash, putty, sand ash regularly to keep the surface clean. We recommend to do above action once a month (NOTE: Professional installation would be highly recommended).
Check Stock

Exhaust Tip 5.00 Dia X 12.00 Long 2.50 Inlet Bolt On Rolled Slant Polished Stainless Steel W50012-250-BOSS-RS Wesdon Exhaust Tip

  • 2.50 Inch Inlet 5.00 Inch Dia 12.00 In Long Rolled Slant Bolt On Exhaust Tip.
  • Bolt On Style fits a Exhaust Pipe 2.50 Inlet.
  • Polished to Mirror Finish Stainless Steel.
Check Stock