Top Bolt on Exhaust Reviews

SPEEDER Exhaust and Intake Manifold Stud Bolt Nut Gaskets Kit Stainless Extended M8 1.25MM*50MM Compatible with Honda Acura B D H F B18 GSR 20Pcs

  • Exhaust manifold Stud Bolt Nut Gaskets Kit is designed compatible with Honda Acura B, C, D, F, H series engines. also works for the intake manifold.
  • You can also remove the gasket (exhaust manifold stud designed compatible with Ford 4.6 & 5.4 Liter V8 Engine).
  • Standard 304 stainless steel studs and serrated flange nuts kit is great replacement for your orginial stud and bolt that are rusted and broken.
  • Exhaust manifold stud nuts kit thread size, M8*1.25MM, also fit other vehicle, such as Chevrolet, GMC, Dodge and so on. Please Check and measure the lengths(50mm) and thread sizes(M8*1.25MM) needed for your specific vehicle application.
  • The exhaust manifold bolts and studs kit has been heat-treated for enhancing its stable performance and durability. All parts are engineered and tested to meet or exceed original standards and performance.
  • We value your shopping experience, If you encounter any problems in installing the exhaust manifold stud bolt nut kit, you can feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
Check Stock

Heavy Duty 2.5 Inch Muffer Clamps Exhaust 2 1/2 Stainless Steel U Bolt Clamp on Tip Pipes Connection

  • Package Includes: One Piece 2-1/2” stainless exhaust clamp. It is made of T201 stainless steel with heavy duty U-bolt saddle design..
  • The 2.5“ exhaust hanger on exhaust with reinforced ribs on the saddle flange, expertly crafted and durable construction for long service. The high....
  • The stainless clamp is consisted of u-bolt, saddle flange and 3/8 Nuts..
  • Please check the detail information as belows. We value your shopping experience and strive to offer high quality product with sincere service. If you....
Check Stock

Exhaust Tip 5.00' Dia OD X 10.00' Long 2.50' inlet Slant Double Wall Stainless Blue Flame Wesdon Exhaust Tip

  • 【Dimension】 ID: 4″ OD: 10″ Length: 18″ Angled Roll Bolt Chrome.
  • 【Design】 Bolt-On installation and Angled Cut – Rolled Edge design. Small hole on the bottom of the exhaust tip facilitate the drainage of accumulated water and prolong the service life of the exhaust tip.
  • 【Material】 Made of High quality Stainless steel has very strong anti-corrosive, Never Rusty..
  • Professional installation is highly recommended.
  • 【Wide Application】 To ensure proper fit make sure your exhaust tailpipe INLET diameter is 4 Inch.
Check Stock

Remflex 8002 Universal Exhaust Gasket, (Set of 2)

  • Universal 3” Collector Flange, 3 Bolt Holes, 3-3/8" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8001 Universal Exhaust Gasket, (Set of 2)

  • Universal 2-1/2” Collector Flange, 3 Bolt Holes, 3-1/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Remflex 8003 Universal Exhaust Gasket, (Set of 2)

  • Universal 3-1/2” Collector Flange, 3 Bolt Holes, 3-25/32" Bolt Hole Spacing, 2/Set.
  • Heating and cooling of the exhaust system causes header and manifold flanges to warp resulting in gaps between the head and header which Remflex exhaust gaskets seal completely due to the thickness and compressibility of the 100 percent flexible graphite.
  • Remflex exhaust gaskets come in a standard 1/8 inch thickness and are designed to crush 50 percent allowing them to fill any pits or gaps in the flange surface up to 1/16 inch.
  • The aluminum cylinder head and steel header or manifold combination are configurations that readily cause gap issues in the mating flanges due to contraction and expansion of the dissimilar materials.
  • Remflex exhaust gaskets fill those gaps permanently.
  • There are no rubber binders or composite materials in Remflex exhaust gaskets so they will not shrink or harden due to time or temperature eliminating the need to go back and continually retighten your flange bolts.
Check Stock

Exhaust Manifold Bolt Repair Kit Compatible with GM Trucks & SUV's(1999 & Newer )With a 4.8, 5.3, 6.0 or 6.2 L

  • No need to remove broken bolts, The exhaust manifold bolt repair kit will repair the exhaust leak without having to remove the cylinder head or drill out and replace the broken end bolts.
  • Install this part is to repair the driver's side front or the passenger side rear corner broken exhaust manifold bolts.
  • Exhaust manifold repair kit compatible with Trucks & SUV's (1999 & Newer) With a 4.8, 5.3, 6.0 or 6.2 L.engine size..
  • Material: Exhaust manifold repair brackets made of carbon steel, exhaust manifold bolt repair brackets will not fail like the bolts do from heat and expansion of the manifold.
  • We value your shopping experience, If you encounter any problems in installing the exhaust manifold stud repair kit, you can feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
Check Stock

Exhaust Tip 3 inch Inlet, MONOKING 3 inch Exhaust Tip Stainless Steel Black Tailpipe for Truck Cars 3' Inlet 4' Outlet 12' Long Bolt On

  • EXHAUST TIP 3 inch inlet -Universal fits 3” Outer diameter tailpipe. NOT fit 3” Inner diameter pipe. 3″ inlet diameter, 4″ outlet diameter, 12″ overall length. If your tailpipe has a 3” OUTER diameter it will fit perfectly.
  • POWERFUL SOUND – 3 inch Exhaust Tips improved powerful sound and distinctive style. 20 Degree of the angle end, slant cut design, Classic Black exterior improved appearance of your tailpipes. Made your car will seem skin to a sports car or at least a car with a modified engine.
  • DURABLE MATERIAL- 3in Exhaust Tip made from Sturdy 304 Stainless Steel not easy to fall off, also avoid rusting and deformation. A small hole on bottom of tip to drain water smoothly, avoid rusting.
  • BOLT ON INSTALL – Holds up long time! Direct Bolt-on, it takes only 2 minutes easy to install. No welding or drilling is needed, just slide the tip into place on the tailpipe and tighten screws with a 6mm allen wrench.If you think it isn’t tight enough, additional welding will be a nice safeguard.
  • PACKAGE CONTENT – Package comes with 1x Exhaust Tip 3 inch inlet. MONOKING Universal black Exhaust Tips 3 inch inlet enjoy 1 YEAR warranty plus lifetime tech support and customer service. Ship from U.S. and arrive within 2-3 days.
Check Stock

Upower 4' to 10' Exhaust Tip Mirror Polished 4 Inch Inlet 10 Inch Outlet Exhaust Tailpipe 18' Length Bolt-On 45 Degree Angle Cut Tail Pipe

  • 【Dimension】 ID: 4″ OD: 10″ Length: 18″ Angled Roll Bolt Chrome.
  • 【Design】 Bolt-On installation and Angled Cut – Rolled Edge design. Small hole on the bottom of the exhaust tip facilitate the drainage of accumulated water and prolong the service life of the exhaust tip.
  • 【Material】 Made of High quality Stainless steel has very strong anti-corrosive, Never Rusty..
  • Professional installation is highly recommended.
  • 【Wide Application】 To ensure proper fit make sure your exhaust tailpipe INLET diameter is 4 Inch.
Check Stock

J2 Engineering J2-CBE-DS-034 Stainless Steel Cat Back Exhaust System [Compatible with 09-13 Infiniti G37 Sedan 4-Door]

  • MODERATE SOUND/STREET SERIES – Street Series performance exhausts are designed to enhance the power and exterior sound of your vehicle without sacrificing comfortable interior noise levels. Fast-flowing mandrel bent pipes with larger or more straight-through mufflers reduce exhaust restriction and enable that MagnaFlow performance tone without garnering racecar levels of attention. Specifically designed for the 2008-2013 Infiniti G37 and 2014-2015 Q60.
  • CAT-BACK PERFORMANCE – Extensive testing and dyno-proven power make this exhaust truly developed for the driven. It is designed to replace the original exhaust components following the catalytic converter. These systems are 50-state legal and designed to optimize power based on the factory calibration.
  • BOLT-ON INSTALLATION – MagnaFlow utilizes state-of-the-art 3D scanning technology during the research and development process to ensure that this exhaust system will fit and outperform the original equipment. CNC precision robotic manufacturing and mandrel bent tubing allow for hassle-free bolt-on installation.
  • STAINLESS-STEEL CONSTRUCTION – Highly corrosion resistant, Stainless-Steel construction incorporating CNC precision robotic manufacturing for quality fitment and longevity. Built to be the ex....
Check Stock

Firman Generator Exhaust Extension Kit

  • Fits mufflers with No.68 & 88 spark arrestor screen - OR- 1-1/2" to 1-3/4" apart, spark arrestor hole spacing..
  • The exhaust adapter bolts onto the generator's stock muffler. Remove the existing spark arrestor and bolt to muffler outlet, re-using original bolts..
  • Changes tone of exhaust noise, for more noise reduction purchase a Zombiebox Noise Barrier.
  • Firman compatible Generator exhaust extension WITH MUFFLER allows for safe venting of exhaust fumes from an enclosure.
  • Find complete noise enclosures and solutions from Zombiebox on the web.
Check Stock

Exhaust Flange, 2inch Universal Flat Oval Split Exhaust Flange Connection Repair Kit Low Carbon Steel Exhaust Downpipe Flange Replacement Accessory

  • Function: This 2-inch flat elliptical exhaust flange provides an effective fixing solution for the exhaust system, removing the intercooler system and turbine parts, such as charging pipes, intake pipes, diesel engines, turbochargers Compressor and heavy-duty exhaust system, etc..
  • Practical Exhaust Flange Repair Kit: The diameter of the center hole of this product is about 2 inches, and the oval bolt hole is about 2 inches. It has the characteristics of fine workmanship, high precision, high sensitivity, practicality and reliability..
  • Great Quality Low Carbon Steel Material: Our exhaust flange is made of high-quality low-carbon steel, which can ensure high hardness, rust resistance, effectively provide services while ensuring long-term use, and has good practicability..
  • High Precision: Our exhaust flanges are produced in strict accordance with the process, and each part is precision processed to achieve precise tolerances to achieve trouble-free performance. Old or damaged adapters can be replaced directly. Please rest assured to buy..
  • Easy Installation: This exhaust flange can be used without welding or cutting the exhaust pipe, just connect it to the flared pipe, and then bolt it to the existing flange you need to connect That's it, the installation st....
Check Stock

MagnaFlow Cat-Back Performance Exhaust System Overland Series Kit 19538 - Designed for the 1996-2002 Toyota 4Runner - 2.5in Main Piping, Single Passenger Side Rear Exit, Satin Finish Dual Mufflers

  • MODERATE SOUND/OVERLAND SERIES - Overland Series performance exhausts are designed to add MagnaFlow's signature deep tone and dyno-proven performance to your overlanding rig. The weight optimized exhaust system’s mandrel bent tubing and single, straight-through muffler are designed to fit higher up in the undercarriage than the stock exhaust configuration to ensure improved ground clearance and utility. Specifically designed for the 1996-2002 Toyota 4Runner.
  • CAT-BACK PERFORMANCE - Extensive testing and dyno-proven power make this exhaust truly developed for the driven. It is designed to replace the original exhaust components following the catalytic converter. These systems are 50-state legal and designed to optimize power based on the factory calibration.
  • BOLT-ON INSTALLATION - MagnaFlow utilizes state-of-the-art 3D scanning technology during the research and development process to ensure that this exhaust system will fit and outperform the original equipment. CNC precision robotic manufacturing and mandrel bent tubing allow for hassle-free bolt-on installation.
  • STAINLESS-STEEL CONSTRUCTION - Highly corrosion resistant, Stainless-Steel construction incorporating CNC precision robotic manufacturing for quality fitment and longevity. Built to be the ex....
Check Stock