Top Bolt on Camber Plates Reviews

Longacre® Racing 79501 Aluminum Toe-In Plates w/Magnets

• These plates are the quickest and simplest way to check toe-in - any contact with other cars or retaining walls is likely to change the toe setting.
• Easy to use - rest one of these plates against the tire on each side and measure toe directly using the 2 tape measures (included).
• Get the most accurate reading - always remember to turn wheels so they are facing straight ahead on level ground and set caster and camber first.
• The Longacre toe-in plates formed design is rigid for accuracy and stays put against the tire while the magnets hold the tape in place.
• The dimensions of the Longacre toe-in plates are 23-1/2" x 9" and are sold as a pair with two 3/4" tapes that feature 1/32" increments.

Tenhulzen Automotive 2-Wheel Alignment Tool - All-in-one Camber/Caster/Toe Plates - Made in USA

• All-In-One Tool Measures Camber, Caster, AND Toe!.
• Patent Pending wheel stand-offs provide unparalleled accuracy..
• Camber Accurate to Within 0.1 Degrees (much better than a bubble gauge)..
• Expensive Turn Plates Are NOT Needed for Caster Measurment..
• Detailed, Step by Step Video Instructions..

Longacre® 52-79505 Deluxe Toe Plates (pair)

• Consistent results - the thicker material and deeper bend gives you more rigid plates for better accuracy with your toe measurements.
• The Longacre deluxe toe-in plates feature a higher kick-out bottom that holds the plate against the wheel better, making them even easier to use.
• Get the job done fast and with less stress - the built in magnets hold the tapes in place while you work, making the job easy for one person.
• The Longacre deluxe toe-in plates are perfect for cars with high camber left front wheels, such as bump stop cars.
• Longacre deluxe toe-in plates will help keep your race car at the front of the pack – this set includes two deluxe toe-in plates and two tire tapes.

Longacre® 52-78290 Digital Caster Camber Gauge

• Be confident with your setup - here's an ultra accurate digital caster / camber gauge that reads to .1º (1/10º) camber and caster as high as needed.
• Protect your investment - the caster camber gauge comes with a magnetic adapter and padded hard carrying case to keep your gauge safe when not in use.
• Make front-end caster and camber adjustments quickly, easily, and accurately - this digital caster camber gauge is also backlit for use in dark areas.
• Adjusting camber can have a dramatic effect on the cornering of your car - optimum camber settings will result in more speed and ideal tire wear.
• Built-to-last, the Longacre digital caster camber gauge is made of strong CNC machined billet aluminum.

WEICHUAN Simple Furniture Legs Mounting Hardware Sets - Include 5/16\ -18 Coarse Attachment Plates, Screws and Rubber Pads for Sofa Couch Chair Legs

• Package include 4pcs plates, 12pcs Screws and 4pcs Rubber Pads..
• Used for attaching legs to sofa, couch, chair, loveseats, ottomans, furniture etc, also for stabilizing the loose legs, for adding strength to old furniture..
• The plates thread fit for 5/16" -18 Coarse Hanger Bolt, NOT FIT FOR 5/16" -24 Fine or M8. please carefully check the hanger bolt size on your present leg to assure that our new plates will be compatible..
• Perfect fit for the hanger bolt size on WEICHUAN wood legs..

BURTON Throwback Snowboard Sz 100cm

• Camp Seven Roots CRC Snowboard: You asked for it and we delivered. The perennial fan favorite Roots finally has an alternate camber brother! The Roots CRC (camber-rocker-camber) is a new edition to the Roots line and allows riders to choose a board with a more loose and relaxed center of the board while loaded camber in the tip and tail put the pop right where you want it. If you think you know the Roots from years past, wait until you ride the new CRC version!.
• Profile: Camber Rocker Camber Rocker in the center to free up your contact points for catch free riding and serious float in powder, is then paired with camber in the tip and tail for explosive pop and tons of added control..
• System APX Bindings: features of this binding are a dream come true. Full length EVA base pad. Either-Or toe strap that can be ridden toe cap style or over the forefoot. Gel insert contoured straps. Inside routed ladder straps, Aluminum 4 tooth ratchets, 15% fiber inclusion in both the baseplate and the highback, anatomically correct footbed, comfy adjustable toe ramps, full dual sided on the fly strap adjustability via cam cleats on both toe and ankle straps..

Specialty Products Company 81260 Alignment Kit

Allstar Performance ALL60203 Upper Control Arm Shim

• Control arm shim is an upper type that is .125 inch thick and a dual mount design for use with 6 inch bolt spacing.
• One-piece dual mount shims are also available in various other thicknesses if needed (all sold separately).
• Shims allow easy adjustment of caster/camber during front end alignment.

Allstar Performance ALL60207 Upper Control Arm Shim

• Control arm shim is an upper type that is . 500 inch thick and a dual mount design for use with 6 inch bolt spacing.
• One-piece dual mount shims are also available in various other thicknesses if needed (all sold separately).
• Shims allow easy adjustment of caster/camber during front end alignment.

Carli Suspension 17+ Superduty F250/F350 4×4 Adjustable Track Bar

• Heim upper control arms are fully adjustable to allow maximum tuning of caster and camber.
• Complete grade 8 hardware kit is included.
• Control arm pivots include zerk fittings to grease the urethane bushings & inner sleeves without disassembly.
• CNC machined tapered spindle adapters convert the factory ball joint to a 1" uniball for added component strength & maximum wheel travel.
• 4130 chromoly tubular upper control arms are 100% bolt on and hand crafted in the U.S.A..

Allstar Performance ALL60208 Upper Control Arm Shim

• Control arm shim is an upper type that is . 750 inch thick and a dual mount design for use with 6 inch bolt spacing.
• One-piece dual mount shims are also available in various other thicknesses if needed (all sold separately).
• Shims allow easy adjustment of caster/camber during front end alignment.

Longacre® 52-78298 Digital C/C Gauge, AccuLevel/QuickSet

• Be confident with your setup - here's an ultra accurate digital caster / camber gauge that reads to .1º (1/10º) camber and caster as high as needed.
• Perfect for large wheels - comes with a Longacre quick set large wheel adapter, suitable for 13" to 24" aluminum wheels.
• The AccuLevel digital readout can be easily removed and used for other angle measurements on the car, such as suspension and driveline.
• Built-to-last, the Longacre digital caster camber gauge is made of strong CNC machined billet aluminum and comes with a hard carrying case.
• Adjusting camber can have a dramatic effect on the cornering of your car - optimum camber settings will result in more speed and ideal tire wear.

VEVOR Wheel Alignment Tool, Toe Plates without Probes, Aluminum Alloy Toe Alignment Plates, Double 16ft Tape Measures Alignment Tools Automotive, Wheel Alignment Tool Gauge Camber Caster

• HIGH FUNCTIONALITY: High-performance wheel alignment tool measures the toe-in, toe-out, tire camber, and calculates the caster using wheel rotation and horizontal offset. These toe plates can help you to adjust your car better..
• DURABLE STRUCTURE: Toe alignment plates are made of aluminum alloy, which is not easy to bend or deform. The strudy structure will provide you with long-term service..
• STAND OFF WHEELS: Our toe alignment tool is different from most products on the market. Two triangular aluminum holders are welded under each aluminum plate, allow our aluminum plates to stand upright by themselves. In addition, you can paste non-slip rubber strips under the aluminum plate to make alignment plates stand more stable..
• MASTERFUL SLOTS: Masterful cut slots can directly clamp the tape measure head. No extra magnetic stripe is needed, not easy to fall, very convenient for one person to operate..
• UNRESTRICTED USE: Two plates can be fixed together with the buckle on the tape measure. The recessed design in the middle is very convenient to carry. It is suitable for most family cars and SUVs. If you have a lifted/4x4 vehicle with larger than stock offroad tires, the tire sidewall will likely be too tall for these to work..