Top Bolt Triangular Truss Reviews

Backyard Discovery 10 Foot Wave Slide, Easy One Piece Installation, Green

  • Compatible with deck heights of 53 to 60 inches.
  • Mounting lumber not included - Required 5/8 x 3/8 x 20 3/8 inches.
  • Mounting hardware not included - Rounded Head 5/16” Bolt x 1 ¼” long with flat washers and a locking nut (Truss head, Carriage bolt, Pan head bolt would all work. ).
  • One-piece construction for easy assembly.
  • Shipping dimensions -118” x 17” x 26”.
  • Limited Lifetime against cracking and fading.
  • Engineered to meet or exceed ASTM standards (code F1148-19) for intended use in private residential settings. is applicable for intended use only..
Check Stock

Backyard Discovery 10 Foot Wave Slide, Easy One Piece Installation, Yellow

  • 10' (118" actual length) Wave slide is compatible with deck heights of 53 to 60 inches high.
  • Age Range: 3 to 10 - Supports up to 250lbs.
  • Super deep wave slide (actual depth is 10") ensures children remain safe while sliding.
  • Mounting lumber not included - Recommended 5/8 x 1 3/8 x 20 3/8 inches.
  • Mounting hardware not included - Recommended rounded head 5/16” bolt with flat washers and a locking nut (Truss head, Carriage bolt, Pan head bolt would all work.).
  • Strong one piece construction with 3 bolt installation.
  • Limited Lifetime Warranty against cracking and fading.
  • Engineered to meet or exceed ASTM standards (code F1148-19) for intended use in private residential settings. Warranty is applicable for intended use only..
  • Assembled dimensions-118" x 23.5" x 18" - Shipping dimensions -118” x 17” x 26”.
Check Stock

Aluminum Truss Arch Kit 9.7ft Wide 8.1ft High Portable DJ Lighting System Bolts

  • The 100% aluminum truss kit is the perfect lightweight, strong, and durable lighting arch trussing system! Featuring ultra strong and lightweight....
  • Features: 660 LB. weight capacity evenly distributed. All parts bolt together, NO HAMMER NECESSARY like standard spigot type trussing.
  • 8" width trussing. 1.25" diameter tubing. Ultra strong industrial grade 100% aluminum build for indoor/outdoor use.
  • System includes: Three (3) 2 Meter (6.56 ft.) aluminum truss sections, Two Corner sections, Two 11"x39" aluminum base plates.
Check Stock

Sonata No 8 for Flute and Piano in G-Sharp Major I Allegro moderato

  • 5/16-18 Steel Zinc-plated One Way Bolt and Cast Aluminum Security Nut.
  • INCLUDES: 2 One-Way Truss Head Bolts and 2 Security Breakaway Nuts.
  • Tamper Resistant Bolt and Nut Makes It difficult But Not Impossible To Remove.
  • Great For Mounting Signs On Any Standard U-Channel Post.
Check Stock

binifiMux 220pcs M4 x 5mm/ 6mm/ 8mm/ 10mm/ 12/ 16mm/ 20mm/ 25mm 304 Stainless Steel Round Pan Head Phillips Machine Screws and Hex Nuts Kit

  • 【100% Solid Stainless Steel】These Truss Head Screws are made of 18-8 (304) Stainless Steel which is one of the highest forms of corrosion-resistant metals, making it last longer than other hardware on the market today..
  • 【Screws That You Can Depend On】Our Truss Head Machine Screws are very strong and are great for both indoor and outdoor use. This stainless is superior to regular steel and provides excellent rust resistance..
  • 【Great To Keep Around】Bolt Dropper stainless hardware is great to have around for use in wet environments. Bolt Dropper hardware is the highest quality available on the market and we stand by our claim 100%. They are strong, corrosion-resistant, and will support all of your projects..
  • 【Dimensions】Diameter: #10 | Length: 1-1/4" | Threads per Inch: 32 | Thread Type: Fine | Quantity: 25 pcs | Material: 18-8 (304) Stainless Steel..
  • 【Lifetime Guarantee】We are so confident that our product is the best on the market that we offer a No Hassle Lifetime Guarantee..
Check Stock

VITCIK Full Fairings Bolt Screw Kits for Kawasaki EX250R Ninja 250 EX-250R ZX250R 2008 2009 2010 2011 2012 Motorcycle Fastener CNC Aluminium Clips (Red & Silver)

  • FASTER SHIPPING: We will ship them within 24 hours. Normally it will take 3-10 business days for delivery (usually 5 days according to the delivery record).
  • Fasteners Bolt Kit Screws Fit For: Kawasaki EX250R Ninja 250 EX-250R ZX250R 2008 2009 2010 2011 2012..
  • Complete Fairing Bolt Kit Includes: Bolt Socket Screw(20+20+20+6+6 pieces) + Truss Screw(10+10 pieces) + Retainer(4+4+2 pieces) + Washer(60 pieces) + Speed Nut(10 pieces) + Lock Nut(40+20 pieces) + LIFETIME friendly customer service..
  • Total quantity of parts included in this kit is 232 pieces..
  • Full fairing bolt kit which contains all the hardware that is needed for the replacement of windscreen and main fairing pieces (front nose fairing, left/right fairing, front tire fender, tail fairing, v-panels, etc), whether the original or aftermarket ones..
Check Stock

3M DBI-SALA 2103670 U-Bolt Roof Anchor (Permanent), Fits Up To 2X8, Silver

  • Makes attaching to the anchorage structure simple, fast and easy for added worker satisfaction and productivity.
  • Specialized fall protection system for residential or commercial wood frame structures keeps you safe and secure.
  • Everything required to install is included, simply place U-bolt over roof truss and install and tighten the bolts and clamp.
  • Provides a tie-off point for the contractor during construction, and also the homeowner for future maintenance of the roof.
  • Permanent U-bolt roof anchor with integral D-ring, flashing and cap, fits up to 2x8 roof member.
Check Stock

SG SPECIAL VE VINTAGE WORN CHERRY

  • Body Body shape: Single cutaway Body type: Solid body Body material: Solid wood Top wood: Not applicable Body wood: Poplar Body finish: Satin Orientation: Right handed Neck Neck shape: '60s SlimTaper D Neck wood: Mahogany Joint: Bolt-on Scale length: 24.75 in. Truss rod: Standard Neck finish: Satin Fretboard Material: Rosewood Radius: 14 in. Fret size: Medium jumbo Number of frets: 22 .
Check Stock

Epiphone SG Special VE Electric Guitar Ebony

  • Body Body shape: Single cutaway Body type: Solid body Body material: Solid wood Top wood: Not applicable Body wood: Poplar Body finish: Satin Orientation: Right handed Neck Neck shape: '60s SlimTaper D Neck wood: Mahogany Joint: Bolt-on Scale length: 24.75 in. Truss rod: Standard Neck finish: Satin Fretboard Material: Rosewood Radius: 14 in. Fret size: Medium jumbo Number of frets: 22 .
Check Stock

El Tornillo Y La Tuerca

  • √ [More US Models, K Kwokker Phillips Round Head Machine Screws, More to Meet Your Various Needs] Slotted/Phillips Combo. Diameter thread size: #8-32, #6-32, #2-1/2. Thread coverage: full thread.
  • √ [More Quantity, More Economical, 651Pcs Truss Head Machine Screws, Bolts Nuts and Washer Assortment Kit] Includes: A.8-32 machine screw: Screw: 25pcs 8-32*1 1/2", 25pcs 8-32*3/4", 25pcs 8-32*1/2", 100pcs flat washers, 100pcs nuts.
  • B. 6-32 machine screws: Screw: 25pcs 6-32*1 1/2", 25pcs 6-32*3/4", 25pcs 6-32*1/2", 100pcs flat washers, 100pcs nuts.
  • √ [Reliable Zinc-Plated Steel. More Than 20 Years of Experience in Fastener Tool Production] Knob and Pull machine screws are zinc-plated steel construction. Zinc-Plated Truss Head Combo Drive Cabinet and Knob Screws will provide durability and corrosion resistance..
  • [Purpose] Assorted nuts and bolts suitable for common project applications: renovation, fence, storage, cabinet, frame and DIY projects. Commonly used in machinery and electrical appliances. Connect the knob or knob to the surface of the cabinet door or drawer..
  • √ [Come With A High Hardness Storage Box, Easy To Use And Stor....
Check Stock

On-Stage LS7720BLT Lighting Stand with Side Bars

  • Plastic material hook clamp for moving head light, par light, spotlight etc. Threaded Bolt: 10mm.
  • Quick and easy to attach, remove or re-position of your light.
  • Completely wrap around truss for added security and stability.
  • Made of Plastic. Load Capacity: 33lb / 15kg . Fit 3 Size Pipe Diameter: 25mm(F14) 36mm(F24) 48mm(F34).
  • Ideal using in stage, DJ, Bar, Pub, Event, Theatre, Disco.....
Check Stock

Fretless 6 String Electric Bass Bolt_On Maple Neck,Poplar Body Sunburst

  • fretless 6 string electric bass, bolt-on maple neck & composite ebony fingerboard.
  • poplar wood body , matte sunburst finish,die-cast black machine tuners.
  • 24 fret markers, a truss rod, two strap hangers, side makers on.
  • 2 volume & 2 tone controls, * soap bar *2 pick-up, inlay on fingerboard.
  • the overall length 43 1/2".scale length 34 1/2 ", nut width 2 1/8".
Check Stock

Glen Burton GE101BCO-BKB Electric Guitar Stratocaster-Style Combo with Accessories and Amplifier Black

  • Includes: Strings, Picks, Gig Bag, Strap, Digital Clip-On Tuner, Truss Rod And 10 Watt Amplifier.
Check Stock