Top Bolt Tailpipe Extractor Reviews

Apeixoto 2.5 Inch Inlet Exhaust Tip 2.5″x4″x12″ Exhaust Tip Blue Burnt Chrome Plated Finish Stainless Steel with Bolt On Design

Function: The Apeixoto exhaust tailpipe tip is used as a a proection to your vehicle’s exhaust pipes witn an outlet diameter of 2.5 inches. It will protect your your exhaust pipe from rust and corrosion under sunlight and rain..
Dimensions: The Apeixoto exhaust tailpipe tip has a standard 2.5’’ x 4’’x 12’’ dimension ( Inlet, Outlet and Length ). Please note that this tailpipe tip is only fit for the vehicles that is a 2.5 inches outlet diameter exhaust pipes..
Design: The Apeixoto exhaust tailpipe tip is constructed with stailess steel and end is bule burnt chrome plated. And the tip has a rolled edge with nearly 20 degree cut. It makes your vehicle look much more shinny and fancy. And there is a little hole on button. It will help to drain water avoiding rust and corrosion..
Installation: Bolt on design and this tailpipe tip can be installed directly. Just make sure that this is is correct size for your exhaust pipes..
Warranty: 100% satisfaction. If you come across any issue or need any help for our Apeixoto exhaust tailpipe tip, feel free to ask and we are here to assist.

Check Stock

Apeixoto 2.75 Inch Inlet Exhaust Tip 2.75 Inches Inlet 3.5 Inches Outlet 12 Inches Long Polished Stainless Steel Exhaust Tailpipe Tip Bolt On Design

Function: The Apeixoto exhaust tailpipe tip is used as a a proection to your vehicle’s exhaust pipes witn an outlet diameter of 2.75 inches. It will protect your your exhaust pipe from rust and corrosion under sunlight and rain..
Dimensions: The Apeixoto exhaust tailpipe tip has a standard 2.75’’ x 3.5’’x 12’’ dimension ( Inlet, Outlet and Length ). Please note that this tailpipe tip is only fit for the vehicles that is a 3 inches outlet diameter exhaust pipes..
Design: The Apeixoto exhaust tailpipe tip is constructed with stailess steel with polished surface. And the tip has a cut edge with nearly 20 degree cut. It makes your vehicle look much more shinny. And there is a little hole on button. It will help to drain water avoiding rust and corrosion..
Installation: Bolt on design and this tailpipe tip can be installed directly. Just make sure that this is is correct size for your exhaust pipes..
Warranty: 100% satisfaction. If you come across any issue or need any help for our Apeixoto exhaust tailpipe tip, feel free to ask and we are here to assists..

Check Stock

10Pcs Screw Extractor and Left Hand Drill Bits Set, Bolt Remover Reverse Cobalt HSS Steel Drill Bit for Remove Stripped Screws and Broken Bolts

Save Time and Effort: Broken bolt extractor kit are used to remove stuck, broken or screwed tools. The stripping bolt remover and extractor easily removes damaged screws, studs, bolts and other accessories..
Unique Design: ez out bolt extractor set is designed with a 135°angle, which makes it easier to cut into the workpiece and has less axial resistance. This design can not only increase the working length of the cutting edge, but also reduce the thickness of the cutting layer, which making the cutting effect better and without damaging other working areas..
Multi-Purpose: Simple drill extractor is multipurpose on your life. Bolt extractors that remove broken screws, whether working on wood or metal, are ideal for construction, automotive, home DIY projects or for industrial use.These extractors are excellent if you are working in a production environment and using screw head bolts..
High and Durable Material: The left hand drills are made from cobalt fortified HSS material, which increases durability and service life.This screw extractor has strong wear resistance and clear chip removal. HSS is harder, tougher and easier....

Check Stock

Irwin Tools 53914 Accessories Impact Bolt Grip 3/4 /19mm 1/2 Dr

Bolt extractor is built for maximum durability and long life with impact drivers.
High-carbon steel helps ensure long bolt extractor life and great durability.
Universal lobular design fits most types of fasteners.
Reverse spiral flutes are engineered to provide maximum gripping power to easily remove broken, damaged or rusted nuts, bolts and screws.
Black oxide finish resists corrosion and increases the life of the bolt extractor.

Check Stock

Luckyway 10-Piece Screw Extractor and Left Hand Drill Bit Set, Bolt Extractors, for Removing Broken Studs, Bolts, Socket Screws, and Fittings

DIMENSIONS - 5pcs HSS left hand drill bits and 5 alloy steel bolt extractor. Screw extractors include 1#, 2#, 3#, 4#, 5#. Left hand drill models include 1/8", 5/32", 3/16", 1/4", 19/64".With a portable storage case that provides excellent protection and against lost screw extractors..
APPLICATION - Damaged Screw Extractor Set Designed to remove broken screws, studs, bolts and other fittings effectively..
MATERIAL - Made of durable hardened steel and tempered twice for extra hardness, promising you a long lasting screw extractor tool of rugged material and outstanding performance..
FEATURES - Spiral flutes are designed to embed themselves deeper into the metal as you turn the tool, so as the fastener resistance increases, the extractor's grip increases.A musthave tool for carpenters, handymen, contractors, construction workers or DIY enthusiasts alike! Get rid of stripped, obnoxious screws in seconds! Even the most rusted, worndown, and embedded screws are no match for this handy remover kit..
HOW TO USE - A broken bolt or screw may be removed from a hole wi....

Check Stock

Spurtar Stud Remover Fit 1/4" to 3/4" (6 to 19mm) Bolt Extractor Nut Splitter With Knurled Roller and Cam Lock, Stud Extractor Tool For Broken Bolt Remover or Seized Studs

Heavy Duty Stud Master : Spurtar 1/2 inch drive stud puller, broken bolt extractor, nut remover suitable for 1/4 inch to 3/4 inch ( 6mm to 19mm ) studs from engine blocks, exhaust manifolds, cylinder heads, and other applications.
Optimum Fit Stud Extractor: Knurled roller uses cam action to grasp the stud firmly and secures optimum fit while minimizing damage to threads. Cam rotates to grip onto the stud for quick and easy use. Help easy out bolt extractor set studs quickly and efficiently.
Safe Stud Extractor Tool: Spurtar professional tools are for commercial or occasional use. Suitable for safely removing broken or seized bolts and studs. 2 holes 1/2" (14mm) and 3/4" (19mm) allow for an optimal fit and minimize thread damage.
Bolt Extractor Operation Guidance: Use with 1/2-inch drive ratchet wrench or flex handle and turn the extractor to engage the cam and stud to tighten, then turn until the stud is removed..
Rounded bolt Remover Unique design: The design allows the tool to be flush with the mounting surface of the stud, so it can grab a stud that breaks off very cl....

Check Stock

A-KARCK Exhaust Tip 2.5 Inch Inlet, 2.5" Inlet 4" Outlet 12" Long Black Coated Finish Muffler Tip For Truck Tailpipe, Stainless Steel Rolled Edge

2.5" ID MUFFLER TIP: 2.5" inlet 4" outlet 12" overall length, suitable for tailpipe with a 2.5" outside diameter..
MATERIAL: Made of sturdy stainless steel to protect the existing tailpipe from corrosion and deformation..
APPEARANCE: Black coating prevents rain erosion. The pure and elegant black exterior can perfectly decorate your vehicle..
UNIQUE DESIGN: Bottom has a drainage hole, which will not affect the appearance and can drain smoothly to avoid rust..
BOLT ON INSTALLATION: No welding or drilling is needed, just slide the tip into place on the tailpipe and tighten with a wrench. (Please check the size of tailpipe before purchasing).

Check Stock

Exhaust Tip 3 inch Inlet, MONOKING 3 inch Exhaust Tip Stainless Steel Black Tailpipe for Truck Cars 3' Inlet 4' Outlet 12' Long Bolt On

EXHAUST TIP 3 inch inlet -Universal fits 3” Outer diameter tailpipe. NOT fit 3” Inner diameter pipe. 3″ inlet diameter, 4″ outlet diameter, 12″ overall length. If your tailpipe has a 3” OUTER diameter it will fit perfectly.
POWERFUL SOUND – 3 inch Exhaust Tips improved powerful sound and distinctive style. 20 Degree of the angle end, slant cut design, Classic Black exterior improved appearance of your tailpipes. Made your car will seem skin to a sports car or at least a car with a modified engine.
DURABLE MATERIAL- 3in Exhaust Tip made from Sturdy 304 Stainless Steel not easy to fall off, also avoid rusting and deformation. A small hole on bottom of tip to drain water smoothly, avoid rusting.
BOLT ON INSTALL – Holds up long time! Direct Bolt-on, it takes only 2 minutes easy to install. No welding or drilling is needed, just slide the tip into place on the tailpipe and tighten screws with a 6mm allen wrench.If you think it isn’t tight enough, additional welding will be a nice safeguard.
PACKAGE CONTENT – Package comes with 1x Exhaust Tip 3 inch inlet. MONOKING Universal black Exhaust Tips 3 inch inlet enjoy 1 YEAR warranty plus lifetime tech support and customer service. Ship from U.S. and arrive within 2-3 days.

Check Stock

Dsycar Universal Stainless Steel 1.5 - 2.25 Inlet Exhaust Tip - Fit Pipes Diameter 1.5 - 2.25 inch Adjustable Car Decoration Chrome-Plated Finish Exhaust Tailpipe Tip 3.3 Outlet 5.4 Long

【 Measure Your Tailpipe Diameter】Please measure the outside diameter of your exhaust pipe before purchase, otherwise our product will not fit your....
【 Note 2 】Please check your original tailpipe's type. Straight tailpipe is for straight type, and curved tailpipe is for curved type..
【 Note 3 】View product details image,Understand the installation and size of the product, can view the other seven exhaust pipe products,Choose....
【Easy to Install】 There is no need to replace any parts,No weld needed. No drill needed.Super Easy to Install! Three Bolt Fit the tip to your....
【Car Decoration】Surface polishing process. The most important thing for us is that you 100% love your purchase. Tips again, please measure your....

Check Stock

WYBENZ Screw&Bolt Extractor Set and Left Drill Bit Kit, Easy Out Broken Lug Nut Extraction Socket Set for Damaged, Frozen,Studs,Rusted, Rounded-Off Bolts, Nuts & Screws(29PCS)

29Pcs Easy Out Bolt Extractor Set: Left hand drill bit set is made of cobalt, nut and ez out screw extractor kit is made of high-hardness chromium-molybdenum steel material, and the reverse spiral groove is designed to buckle downward to provide maximum grip. Made In Taiwan!.
Save Time and Effort:The ez out extractor kit is a 3-in-1 screw & nut removal kit and drill bit kit. The stripping bolt remover and extractor easily removes damaged screws, studs, bolts and other accessories. Whether it‘s for car maintenance or daily use, it can provide you with great convenience..
Bolt Nut extractor Size: 1/4 inch, 5/16 inch (8 mm), 3/8 inch, 7/16 inch (11 mm), 1/2 inch, 9/16 inch (14 mm), 5/8 inch (16 mm), 11/16 inch, 3/4 inch (19 mm), Contains most common sizes..
Screw extractor set: 1/8", 5/32", 3/16", 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 13/32". Drill bit kit: 1/8", 5/32", 3/16, 7/32", 1/4", 9/32", 5/16", 11/32", 3/8", 11/32". Each precision tool has a clear mark, screw extractor and drill bit kit Easy out rusty or damaged screws..
WYBENZ promises that customers can enjoy our friendly customer service (just send us an email via Amazon), and a free warranty within 365 days and Free Shipping. If you have any questions, please contact us.We also need you hel....

Check Stock

ARES 70016 - Damaged Bolt and Stud Extractor Tool - Grips and Removes 1/4-Inch to 1/2-Inch Studs - Ideal for Broken, Rounded Off, Painted Over, and Rusted Tight Bolts

ABOUT THE TOOL: This damaged bolt and stud extractor tool is 3/8-inch drive and can be used with manual or pneumatic impact wrenches and ratchets. The hexagonal flat can also be used with flat wrenches, adjustable wrenches, sockets, and locking pliers. Manufactured with high-grade Heat-Treated Alloy Steel for maximum durability, this tool also features a chrome finish for additional rust protection..
MULTIPLE USES: This bolt extractor will save hours of frustration on broken exhaust manifolds, oil filler plugs, rounded starter bolts, low grade bolts left in saltwater, painted-over bolts, rusted tight bolts and more..
TRADITIONAL BOLT EXTRACTORS: Traditional bolt extractors force the user to guess which size the damaged stud is. They have a tendency to strip the screw even more and shave metal off without budging the screw, leaving you worse off than when you started. The design of this bolt extractor allows you to clamp down on the damaged stud, eliminating the guess work..
RELIABLE | EFFECTIVE | EFFICIENT: Users trust ARES to be quality tools. You are backed by our Performance Assurance Limited Lifetime Warranty. If you ha....

Check Stock

ACROTOL 26 Pieces Bolt Extractor Set, Spiral Screw Extractor Set and Drill Bits, Extraction Socket Set for Removing Damaged, Rusted, Rounded Bolts, Nuts and Screws

[Specifications] 26 PCS Screw&Bolt Extractors/Drill Bit Set includes 6 easy out style spiral flute extractors, 13 PCS bolt&nut extractors, 1 PC 1/4" hex adapter and 6 PCS drill bits..
[Size] Nut&Bolt Extractor Size: 1/4inch, 5/16inch (8mm), 3/8 inch, 10mm, 7/16 inch (11mm), 12mm, 1/2inch, 13mm, 9/16inch (14mm), 5/8 inch (16mm), 17mm, 11/16 inch, 3/4 inch (19mm), included 3/8"-1/4" hex adapter. Spiral Flute Extractors Size: 1#, 2#, 3#, 4#, 5#, 6#. Drill Bits Size: 3/32", 1/8", 5/32", 1/4", 9/32", 3/8"..
[Material] Every screw & bolt extractor is made from high hardness chrome-molybdenum steel, the cobalt drill bit is made from HHS..
[Note] Cobalt drill bits should not used for stainless steel. The bolt extractor with unique plum-shaped internal thread design provides excellent torque and can be used to rotate fasteners with deep bolts..
[Function] Spiral flute extractors are perfect for common fasteners, the bolt extractors are for freeing partly-exposed fasteners. The kit also includes right hand cobalt drill bits for fasteners, which can be used to help drill these fasteners..

Check Stock

XDOVET Screw Extractor Set, Screw and Bolt Extractor Set, Easy Out | Heavy-Duty | Rocket Socket-25PCS

【25 pcs bolt extractor set&multi-application】 Extractors from 1/8 inch (3.5mm) to 7/8 inch (23mm) by 1/32” increment and comes with a heavy-duty storage case.Extractor set can be used to remove broken studs, bolts, hexagon socket screws and fittings, or it can be used with a hexagonal drill bit for a wider range of applications..
【Precisely machined aggressive multispline teeth】The internal thread with reverse spiral flutes design to bite down to provide maximum gripping power, the more you turn, the tighter the socket grips.Each surface is precision machined and resistant to corrosion. Internal left-handed spiral design for extra grip and faster tapping..
【High-visibility size】 Extractor size and recommended drill bit size are etched on each tool for quick selection of the right drill bit.Heavy-duty blow-molded case lets all the bolt remover stay organized and take your set on the go.Compatible with common to heavy-duty power tools, drivers and screwdrivers handle tools. The knockout pin for easier removal..
【Premium industrial grade material】Made of heat-treated high-quality high-carbon steel (chromi....

Check Stock