Top Bolt Nut Washer Stud Reviews

SPEEDER Exhaust and Intake Manifold Stud Bolt Nut Gaskets Kit Stainless Extended M8 1.25MM*50MM Compatible with Honda Acura B D H F B18 GSR 20Pcs

  • Exhaust manifold Stud Bolt Nut Gaskets Kit is designed compatible with Honda Acura B, C, D, F, H series engines. also works for the intake manifold.
  • You can also remove the gasket (exhaust manifold stud designed compatible with Ford 4.6 & 5.4 Liter V8 Engine).
  • Standard 304 stainless steel studs and serrated flange nuts kit is great replacement for your orginial stud and bolt that are rusted and broken.
  • Exhaust manifold stud nuts kit thread size, M8*1.25MM, also fit other vehicle, such as Chevrolet, GMC, Dodge and so on. Please Check and measure the lengths(50mm) and thread sizes(M8*1.25MM) needed for your specific vehicle application.
  • The exhaust manifold bolts and studs kit has been heat-treated for enhancing its stable performance and durability. All parts are engineered and tested to meet or exceed original standards and performance.
  • We value your shopping experience, If you encounter any problems in installing the exhaust manifold stud bolt nut kit, you can feel free to contact us via Amazon Mail. We provide 24-hour mail service and will help you as soon as possible.
Check Stock

Sleeve Anchor 3/8-Inch by 1-7/8-Inch - Hex Head Sleeve Anchors Concrete Bolts Concrete Sleeve Anchors 100

  • CONCRETE BOLTS SLEEVE ANCHORS Sleeve type anchors feature a split expansion sleeve over a threaded stud bolt body and integral expander, nut and washer.
  • HEAVY DUTY SLEEVE ANCHORS made of plated Carbon Steel.
  • CONCRETE SLEEVE ANCHORS Anchors should be installed with carbide tipped hammer drill bits or any other concrete drilling type bits.
  • CONCRETE SLEEVE ANCHOR Perfect for mounting to concrete or block.
  • SIZE: The diameter of the anchor is 3/8". The length of the anchor is 1-7/8".
Check Stock

Sleeve Anchor 5/16-Inch by 2-1/2-Inch - Hex Head Sleeve Anchors Concrete Bolts Concrete Sleeve Anchors 100

  • CONCRETE BOLTS SLEEVE ANCHORS Sleeve type anchors feature a split expansion sleeve over a threaded stud bolt body and integral expander, nut and washer.
  • HEAVY DUTY SLEEVE ANCHORS made of plated Carbon Steel.
  • CONCRETE SLEEVE ANCHORS Anchors should be installed with carbide tipped hammer drill bits or any other concrete drilling type bits.
  • CONCRETE SLEEVE ANCHOR Perfect for mounting to concrete or block.
  • SIZE: The diameter of the anchor is 5/16". The length of the anchor is 2-1/2".
Check Stock

Spurtar Stud Remover Fit 1/4" to 3/4" (6 to 19mm) Bolt Extractor Nut Splitter With Knurled Roller and Cam Lock, Stud Extractor Tool For Broken Bolt Remover or Seized Studs

  • Heavy Duty Stud Master : Spurtar 1/2 inch drive stud puller, broken bolt extractor, nut remover suitable for 1/4 inch to 3/4 inch ( 6mm to 19mm ) studs from engine blocks, exhaust manifolds, cylinder heads, and other applications.
  • Optimum Fit Stud Extractor: Knurled roller uses cam action to grasp the stud firmly and secures optimum fit while minimizing damage to threads. Cam rotates to grip onto the stud for quick and easy use. Help easy out bolt extractor set studs quickly and efficiently.
  • Safe Stud Extractor Tool: Spurtar professional tools are for commercial or occasional use. Suitable for safely removing broken or seized bolts and studs. 2 holes 1/2" (14mm) and 3/4" (19mm) allow for an optimal fit and minimize thread damage.
  • Bolt Extractor Operation Guidance: Use with 1/2-inch drive ratchet wrench or flex handle and turn the extractor to engage the cam and stud to tighten, then turn until the stud is removed..
  • Rounded bolt Remover Unique design: The design allows the tool to be flush with the mounting surface of the stud, so it can grab a stud that breaks off very cl....
Check Stock

White Crater Knobs Drawer Pull Kitchen Cabinet Pull Dresser Knob Shabby Restore Decorative Knobs - Pack of 10

  • INCLUDED: Pack of 10 Crater Decorative Ceramic Knobs with washer/nut for mounting.
  • MEASURES: 1.62" Diameter, 1.25" Projection, 1.75" Length of Bolt.
  • No additional hardware required. Bolt, Washer & Nut included for mounting..
  • Upgrade cabinets, drawers, furniture with our decorative knobs.
  • Knobs are individually wrapped for protection or resale.
Check Stock

Mansfield 630-0204 2\ SmartFasten Tank to Bowl Kit (Black)

  • Mansfield 630-0204 2" SmartFasten Tank to Bowl Kit.
  • Includes tank to bowl gasket, three patent-pending bolts, three nuts and ballcock coupling nut:.
  • Hassle Free: The bolt locks in place, so no reaching into the tank while tightening the nut.
  • Washer Free: A rubber seal is already molded onto the bolt..
  • Rust Free: Since the bolt's head is rubber, water never comes into contact with metal.
Check Stock

Sunny Health and Fitness Chain Drive Indoor Cycling Bike Silver with Workout Cooling Towel

  • Sunny Health and Fitness Chain Drive Indoor Cycling Bike Silver.
  • Designed with a heavy duty crank, steel frame, and a 30lbs chromed solid flywheel.
  • Transportation wheels on the bottom for easy portability.
  • IN THE BOX: 1x Main Frame 2x Front Stabilizer 1x Rear Stabilizer 1x Handlebar 1x Seat Post 1x Seat Slider 1x Saddle 3x Pop-pin Knob 1x Set of Pedals 1x Set of Cranks 4x Leveler Feet 4x Oblong Cap 10x Flat Washer 4x Allen Bolt 3x Plastic Bushing 1x Square Cap 2x Phillips tapping screw 4x Hex Nut M10 1x Water Bottle Holder 2x Nylon Nut 2x Foam Grip 2x End Cap 4x Allen Bolt 4x Spring Washer 1x Set of Handle Bar Covers 1x Handlebar Post 4x Phillips Screw 2x Allen Bolt 2x Roller 1x Allen Wrench S6.
  • BUNDLE INCLUDES: Sunny Health and Fitness Chain Drive Indoor Cycling Bike Silver - Workout Cooling Towel Orange.
Check Stock

Keymod Swivel Stud / Keymod Harris Bipod Adapter, AC-SW17K, Standard, Steel, Black

  • Tufforce swivel stud fit on Keymod System for sling or bipod connecting........
  • 1 stud with standard screw M4 , 1 lock wash and 1 special Keymod nut in package.
  • nut's thickness Designed to leave a margin to file down for fitting all hand guard's thickness in installation..
  • Or add a small washer out hand guard, in which it should be tighten up..
Check Stock

5pc Set - Stainless Steel T316 Lifeline Hand Swage Stud End Fitting- for 1/16 Cable

  • Type 316 Stainless Steel Lifeline Hand Swage Stud End Fitting for Cable Railing- For 1/16" Cable.
  • High Quality - Marine Grade For Maximum Corrosion Resistance.
  • Cable Size: 1/16" - Thread: 1/4" - Thread Length: 1-7/8" - Overall Length: 4-3/16".
  • Includes 5pcs - Each Piece Comes With: Stud, Nut, Washer & Cap Nut ( As Pictured).
  • A Swage Tool Is Required For Crimping - Please See Our Amazon Storefront For Swaging Tool.
Check Stock

Prime-Line 9118861 K-Lock Nuts With External Tooth Washer, 1/4 inch-20, Zinc Plated Steel

  • Hex nut with a built in free spinning external tooth lock washer.
  • Teeth on lock washer help to lock nut into place.
  • Screws onto a bolt, cap screw or threaded rod of the same thread size.
  • Thread Type: Coarse, Thread Class: UNC-2B.
Check Stock

SST Identibolt Bolt and Nut Identifier Gauge

  • ... Lengths and Nut Diameters (Unless You'll Miss Making Multiple Trips to the Hardware Store)".
  • ULTIMATE NUT AND BOLT IDENTIFICATION TOOL - The Identibolt Measures Common Imperial SAE and Metric Thread Sizes, Identifying Hardware from #6 to ½" & 4mm to 14mm. Each Size is Accompanied By a Male Thread (for Nuts and Washers), and a Female Thread (for Bolts and Screws)..
  • DURABLE AND BUILT TO LAST - SST's 4"x20" Solid Metal Plate Construction is Hard Anodized for Maximum Thread Strength, With Laser Etched Markings that Will Never Fade or Get Scratched off. Multiple Mounting Holes Give You the Option to Wall Mount it, Secure it in Your Toolbox, or Keep it on Your Workbench!.
  • TWIN RULERS - Inch and Centimeter Rulers on the Bolt Identifier's Edge Help to Quickly Identify the Length of Your Bolt, Screw, Nut, Washer, or Will to Live. Measure Your Hardware Correctly the First Time and Never Make a Second Trip to the Hardware Store Again..
  • UNMATCHED WARRANTY - Masterfully Machined from 6061 Aluminum with a Beautiful Hard Anodized Finish and Backed by 5 Year SST Warranty, We Stand Behind the Quality and Accuracy of our Identibolt Bolt and Nut Identifier (and All our Tools at That).
Check Stock

BOYISEN Hitch Tightener Anti-Rattle Hitch Stabilizer - Heavy Duty 304 Stainless Steel Hitch Clamp for 1.25 and 2 inch Hitches Reduce Shaking from Hitch Tray Bike Rack Trailer Ball Mount Rust Free

  • Nut Issued Solved, regarding to the nut will stuck up on U bolt thread, we haved changed another nut provider, added length of the nut, so it will....
  • Eliminating Wobbling and rattling, install correctly and it can stop rattling, wobbling, rocking and significantly reducing noise..
  • Permanent Rust Freely, U bolt, flat washer and lock washer were made of 304 stainless steel, the tightener plate is well coated, it would prevent from....
  • Easy Installation, easily installs with Class I, II, III or IV (1, 2, 3 or 4) hitches that measure either 1.25" and 2" (will not work on 2.5" or....
  • 100% Satisfaction, if you aren't 100% Satisfied for any Reason, please contact us via Amazon message, We'll Refund Your Money..
Check Stock

T.K.Excellent Hex Bolts M6 M8 M10 and Hex Nuts and Washers Set Kit,128 Pcs

  • This 128-piece bolt, nut and washer assortment includes a variety of long machine bolts, hex nuts, and split washers in popular sizes to handle a wide variety of projects..
  • Assortments are often used for maintenance, repairs, projects and manufacturing. They are great for home, office or business use..
  • The set comes in storage case for easy portability so you'll always have the right nut or bolt for the job. .
  • Carbon steel, zinc-plated class 8.8 for superior high quality..
  • Kit Includes:M6*16,M6*20,M6*30,M8*16,M8*20,M8*25,M10-1.25*20,M10-1.25*30,M10-1.25*35JIS B1180 Cap screws(class 8), M6,M8,M10Hex nuts(class 8),M6,M8,M10DIN125 Flat washer.
Check Stock