Top Blow Mold Machinery Reviews

Capri Tools Air Blow Gun (2-Way Air Blow Gun)

Blow stubborn debris, dust, water, and more off of all kinds of materials and machinery with this powerful air blow gun with 150 maximum PSI.
Control the air flow by turning the flow control knob conveniently located above the handle.
Get to hard to reach areas with the extra-long 4.5 in. nozzle.
Constructed with heavy-duty components and a solid, attractive aluminum frame, and comes equipped with an ergonomic contour soft grip.
2-way 1/4 in. NPT air inlet lets you to connect the air hose from either top or bottom to suit your needs. A 1/4 in. NPT quick connector is included.

Check Stock

Electronic Specialties 193 Black 2.5' x 5' 12/24V Diagnostic Relay Buddy Pro Test Kit

Tests 5 different relays, both 12V and 24V and 3 diagnostic trouble codes help define the cause of the bad relay.
Kit Includes 5 Relay Adapters and blow mold case.
Fails bad relays - Good/Bad indication, green light for PASS, red light for FAIL with flashing trouble code.
Tests 5 different relays, both 12V and 24V.
3 diagnostic trouble codes help define the cause of the bad relay.
#193 Kit Includes 5 Relay Adapters and blow mold case.
Quick off-the-car relay tester - checks relay coil & switch contacts.

Check Stock

Micarta Linen LE Phenolic Sheets .250inch (1/4inch) Thick x 12inch x 36inch,Natural(KS-2356-21-10)

✤ Insulating rod has the characteristics of insulation and no static electricity, making it a mold for insulating switches, variable resistors, and machinery for electronic products..
✤ Good physical properties: The insulating rod has a certain degree of temperature resistance and is used for tooling molds. Instantaneous temperature resistance of 140°C, long-term temperature resistance of 90°C, and can be used in a variety of high-temperature environments..
✤ Product application: It is suitable for electrical machinery, electrical equipment and insulating structural parts with high mechanical performance requirements, and is used in electronic workshops, chemical machinery, aviation industry, petrochemical and other fields..
✤ Excellent insulation: high mechanical strength, toughness and wear resistance, dimensional stability, corrosion resistance. Excellent performance, good electrical performance at room temperature, and good mechanical processing performance..
✤ Material: Phenolic resin. The insulating rod corrosion resistance, precision machining processes.Anti-insulation,high hardness,easy processing,non-absorbent, non-conductive.widely used in electrical products..

Check Stock

SAKAI Pneumatic Vacuum Cleaner Kit Dual Function Air Vacuum Blow Gun and Suction Vacuum Including Vacuum Bags, Tube & Accessories

VACUUM & BLOW:This 2 in 1 tool can be used either as air blow gun, or as an air vacuum gun.Easy to switch from blowing function to suctioning function with simple switch of the main valve. Blow away stubborn debris, dust, water, and more off of all kinds of materials and machinery..
PACKAGE CONTENT: 1 X housing, 1 X Flexible tube, 1 X extension Round Nozzle for those hard to reach places, 2X Hose clamp and 1 X Durable Dust bag to contain all dirt and debris caught by the powerful shop vacuum..
MULTI PURPOSE:Used for fine powder pick up, liquid pumping, metal dust and filing pick up, glass pick up and cotton mill cleaning.NOTE:It cannot be used alone and needs to be used with air compressor.
POWERFUL SUCTION / POWERFUL VACUUM: Normal operating range is 100 PSI and max operating range is 150 PSI which makes it a powerful pneumatic suction gun. The big bad wolf has nothing on this blow gun!.
EASY TO OPERATE:Ergonomically designed for user's comfort.This pnumatic vacuum comes with heavy-duty components and a solid, attractive frame.

Check Stock

CARTMAN 9-Way Internal/External Slide Hammer Puller Set - Pulls Hubs, Rear Wheel Axle Shafts, Bearings, Bushings, Seals, Retainers

Ideal for internal and external pulling on bearing cups, stubborn oil seals, Bushings, and many press fitted parts. Features: Internal and External Three Leg and Two Leg jaw puller yokes.
5lb. Slide Hammer, 425mm long, M16*1.5mm UNF thread.
Front Hub puller, Rear Axle puller, Locknut Cone.
Dent puller screws (large and small), Supplied in blow mold storage case..
Features: Internal and External Three Leg and Two Leg jaw puller yokes..

Check Stock

AIMIMI Bakelite Rod Brown Insulating Sticks Phenolic Resin Electrostatic Prevention Suitable for Structural Parts Length 500mm,Diameter,35mm

✤ Insulating rod has the characteristics of insulation and no static electricity, making it a mold for insulating switches, variable resistors, and machinery for electronic products..
✤ Good physical properties: The insulating rod has a certain degree of temperature resistance and is used for tooling molds. Instantaneous temperature resistance of 140°C, long-term temperature resistance of 90°C, and can be used in a variety of high-temperature environments..
✤ Product application: It is suitable for electrical machinery, electrical equipment and insulating structural parts with high mechanical performance requirements, and is used in electronic workshops, chemical machinery, aviation industry, petrochemical and other fields..
✤ Excellent insulation: high mechanical strength, toughness and wear resistance, dimensional stability, corrosion resistance. Excellent performance, good electrical performance at room temperature, and good mechanical processing performance..
✤ Material: Phenolic resin. The insulating rod corrosion resistance, precision machining processes.Anti-insulation,high hardness,easy processing,non-absorbent, non-conductive.widely used in electrical products..

Check Stock

Yinpecly 30mm OD 15mm ID 40mm Long Spiral Stamping Light Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Yellow Tone 2pcs

【SIZE】- Hole Diameter (Outer Diameter): 30mm/1.18".
Inner Diameter (Tolerance +1mm/-0.5mm): 15mm/0.59".
【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
They have the characteristics of small size and high precision.
【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
【PACKAGE CONTENT】- Package Content: 2pcs x Compression Mould Die Spring.

Check Stock

Yinpecly 12mm OD 6mm ID 30mm Long Spiral Stamping Middle Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Red Tone 10pcs

【SIZE】- Hole Diameter (Outer Diameter): 12mm/0.47".
Inner Diameter (Tolerance +1mm/-0.5mm): 6mm/0.24".
【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
They have the characteristics of small size and high precision.
【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
【PACKAGE CONTENT】- Package Content: 10pcs x Compression Mould Die Spring.

Check Stock

Yinpecly 20mm OD 10mm ID 30mm Long Spiral Stamping Light Load Compression Mould Die Spring, for Mechanical Equipment 3D Printer Accessories Blue Tone 10pcs

【SIZE】- Hole Diameter (Outer Diameter): 20mm/0.79".
Inner Diameter (Tolerance +1mm/-0.5mm): 10mm/0.39".
【MATERIAL】- The Compression mould die spring is made of spring steel, and the surface is painted, so there is more durable and can be reused many times.
【FEATURE】- Mold springs adopt closed design, rectangular cross-section, and harder than ordinary springs.
They have the characteristics of small size and high precision.
【APPLICATION】- Mold springs are mainly used in the mold machinery of injection molding machines, such as 3D printer heated bed, which are very suitable for high-stress applications, as well as various springs and other applications.
【PACKAGE CONTENT】- Package Content: 10pcs x Compression Mould Die Spring.

Check Stock

Fairly Odd Novelties Grenade Shaped 3D Mold Fun Bomb Military Ice Maker Gift, One Size, Green

EXPLOSIVE PERSONALITY! - This mold creates one huge, grenade-shaped ice cube that is sure to get people talking!.
A BIG BANG! - While it only makes one cube, it's massive and sure to keep your drink cold for a long time!.
MORE THAN ICE! - This tray makes great ice cubes, but also can make fun chocolates, candies, jellies, soaps, or any other mold-able item!.
BE THE HERO! - If you like action movies, explosions, or just fun novelty items that make you feel like a badass, you need this in your collection!.
AN EXPLOSIVE GIFT! - This ice mold/maker is sure to blow everyone away at any birthday, white elephant, office, or secret Santa party and be the gift to beat!.

Check Stock

Set of 2 Accessory Cord with One Led Light Bulb 6Ft Blow Mold Light Indoor String Lights C7 Lamp with Spare Fuse for Halloween and Christmas Decorations Craft Village House Decoration

☃【Blow Mold Light Cord with Clip Bulb】The warm white led light bulb has stable lightness and temperature, C7 candle light bulbs fits for most....
☃【Safe and Energy-saving】1W Led bulb lamp and Replacement Cord Blow mold light has lower power consumption and cooler touch, lower Watt but....
☃【Modern Design for Easy use】The adjustable metal fixing and turn on/off switch allow you can fix it on the crafts easily and control the light....
☃【2PCS Available Fuse Wires】Differ from others string led lights and couples bulb lights, ours has 2 built-in fuse wires in each plug for each....
☃【Package Includes】2x led bulbs, 2 x cords with plug, 1x user manual, you can assemble it in few minutes. Warm Reminder: please make sure nice....

Check Stock

Mxfans 100pcs Black 10.9 Carbon Steel Flat Countersunk Head Hex Socket Screw M3 x 10mm

Mainly used for: the mold manufacturing, hydraulic motors, the electronics industry and other industrial machinery and equipment..
Made of alloy steel,surface black oxide treatment..

Check Stock

Neiko 02409A 3/4

A complete set of high-torque, SAE chrome molybdenum steel sockets with drive for trucks and heavy machinery.
Set includes 18 sliding T head breaker bar and two extension bars for loosening tough fasteners by hand.
18, 24 tooth, oval-head ratchet with quick-release drive tang for manual use without impact driver.
Six point design grips the flat sides of fasteners rather than the corners to prevent stripping and rounding off of bolts.
Set comes with 17 Sockets: 7/8", 15/16", 1", 1-1/16", 1-1/8", 1-3/16", 1-1/4", 1-5/16", 1-3/8", 1-7/16", 1-1/2", 1-5/8", 1-3/4", 1-13/16", 1-7/8", 2" and 13/16" Square Socket.

Check Stock