Top Blade Fuse Tap Reviews

Standard Blade Fuse Holder & Fuse Kit - Muhize Fuse Tap 12V Car Add-a-circuit Fuse TAP Adapter Fuse Holder with 5 Amp Standard APR ATO ATC Blade Fuse (5 Pack)

PACKAGE INCLUDE - MuHize 5 x Add-A-Circuit fuse holder with heavy duty 16 gauge red color wire + 5 x 5 AMP Standard blade fuse..
DUAL-SLOT FUSE HOLDER - It provides one fuse holder to protect original circuit and provides a lead with the second fuse holder for new circuit..
EASY TO USE - Plug into an existing fuse holder. Easy to install the additional circuits without splicing or cutting..
WIDELY APPLICATION - MuHize assorted add a circuit Fuse Tap Adapter kit commonly fits for Standard blade fuses (rating 2Amp-20Amp), Perfect for car alarm, cell phone charger, GPS, DVD player, dash cam, etc.
HIGH QUALITY - 100% brand new & made from excellent materials, good electrical conductivity, and melting resistance..

Check Stock

Nilight 10 Pack 12V Car Add-a-circuit Fuse TAP Adapter with 5 Amp Standard APR ATO ATC Blade Fuse Set for Cars Trucks Boats

Dual-slot Fuse Holder: Provides one fuse holder to protect existing circuit and a second fuse holder to protect new circuit. Blue flexible socket....
Easy to Use: No need to cut or splice wires to install your electronic accessories, convenient and easy to add an extra power or connection to the....
Superior Quality: All of them are made from high quality materials, good bending performance, melting resistance and excellent electrical....
Wide Range of Uses: You can use this dual-slot fuse holder when adding LED strips, radar detectors, dash cams, or any other electronic that requires....
Package Include: 10pcs Standard add-a-circuit fuse tap adapter + 10pcs 5Amp Standard blade fuse for your convenience..

Check Stock

VORCOOL ATO ATC Standard Blade Fuse Holder with 20A Blade Fuse for Car Pack of 4

The flat plug fuse 20A with cable for power tap directly on the fuse..
These backups can be used in current vehicles that have installed no ignition or permanent plus terminal in the radio slot..
Max. System capacity up to 20A. Max. voltage: 32V..
Applicable safety: ATO ATC Standard 6.3mm blade fuses..
Cable wire: UL1015 16 AWG Red. Length: approx. 110mm..

Check Stock

Radar Detector 10ft Hardwire Kit for Escort Valentine One Uniden Beltronics | 4 Sizes of Tap a Fuse included | Quick Connection Plug and Play

HARDWIRE KIT- 10Ft Wire With 4x Tap-a-fuse and 4x 5a Fuses.
PLUG AND PLAY - No Soldering or tapping wires.
MULTIPLE FUSE SIZES - Tap-A-Fuse in 4 Common Sizes ATC, ATS, Mini, and Micro 2.
FUSES INCLUDED - Comes With 5a Fuse For Each Tap-A-Fuse.
FITS MULTIPLE RADAR DETECTORS - Escort, Valentine 1, Uniden.

Check Stock

Dash Cam Hardwire Kit Mini USB Dashcam Hardwiring Kit Converts 12V-24V to 5V/2.5A w/ Fuse Kit and Installation Tool Low Voltage Protection 11.5ft

What's included: You will get 1 x Mini USB hardwire kit,4 x Fuse Tap,4 x Blade Fuse, dash cam hardwire with the most popular fuse types will meet the....
24 Hours Surveillance: The vehicle hard-wire kit connected to car battery or fuse box power, can uninterruptedly supply power for dash camera for 24....
Multiple Security Protection: With low voltage protection, our hardwire kit will automatically cut off the power after 60s when the voltage is lower....
High Secure Standards: The mini USB hardwire kit with built-in precise switching power supply module can transform 12V(24V) to 5V. The built-in....
High Compatibility - Our hardwire kit works for almost all car mini USB devices, such as dash cam, mirror dash cam, GPS navigator, and radar detector..

Check Stock

ABN Fuse Tap Fuse Holder & Fuse 5-Pack 12V Add a Circuit Kit Standard ATO Fuse (NOT Mini) Blade & 15A AMP Adapter

INSTALL DEVICES WITHOUT SPLICING: Add devices and accessories to your car or any vehicle with compatible sized fuses without cutting into wires.
Designed to allow you to turn 1 fuse slot into 2 while providing protection for both circuits.
Tap the fuse box to power additional electronic devices with no need to cut or splice.
Use this to add a circuit without cutting into your wire harness.
Easier to access and to know which circuit you are on than tapping into difficult existing lines.
VARIOUS APPLICATIONS: Gives you the positive side of your battery so you can hardwire a 12V radio, LED light strip, radar detector, dash cam, GPS, backup camera, USB charger, or any other small electronic device that requires direct wiring into the fuse box (fuse to factory fuse panel) without needing to cut or splice.
If replacing a radio, use the existing radio wiring.
FITS YOUR VEHICLE: Allows user to turn 1 fuse slot into 2 while providing protection for both circuits.
Designed for use with standard 15A ATO fuses (not mini).
Includes a connector on the end of the wire for your convenience.
EASY TO USE: Pop in this automotive fuse tap replacing the existing fuse to have a great tap for your accessories.

Check Stock

Radar Detector Hardwire Kit,Direct Wire Wiring kit for Escort Valentine One Uniden Beltronics Cobra Radar Detector Quick Connection Plug and Play Power Cord Cable

[2021 New Upgrade Radar Detector Hardwire Kit ] You will get 1 x Radar Detector hardwire kit,1 x installing crowbar,4 x fuse tap cable,1 x Back-up....
[Multiple Fuse Sizes] Tap-A-Fuse in 4 Common Sizes ATC, ATS, Mini, and Micro 2 Comes With 5a Fuse For Each Tap-A-Fuse,plug and play No Soldering or....
[Wide Compatibility] Our radar detector hardwire kit is suitable for Cobra RAD 350 380 450 480i XRS9370 XRS955 XRS5300 XRS7700,Uniden DFR1 DFR3 DFR5....
[Easy Installation] Simple hidden wiring keeps the car neat and tidy and releases the cigarette lighter for connecting to more devices. TIPS: Please....
[Worry-Free Sales Service] Each of our Radar Detector hardwire kit has undergone stringent quality testing.Cover any Radar Detector hardwire kit....

Check Stock

ASI PTF-76-10, 5 x 20 mm PCB Fuse Holder for Printed Circuit Board Mount, 15 mm Pin Spacing, No Center Pin, 10 Amp, 250V, UL (Pack of 10)

【12v Inline fuse holder for standard blade fuses 】-Fuses holder kit including 12PCS 14 AWG inline fuse holders with 60PCS standard car fuses (2A,3A,5A, 7.5A)X5PCS+(10A,15A,20A,30A)X10PCS . The auto fuse size:19mm x 5mm x 18.5mm.14 Gauge Waterproof Pigtail In-line Fuse Holder can support fuses rating of 1A 2A 3A 4A 5A 7.5A 10A 15A 20A ATC/ATO blade fuse..
【Good Conductivity&High-Temperature Resistance】-The Standard blade fuse holder made of tinned copper as a conductor to ensure good bending performance, refractory resistance and excellent electrical conductivity.Heavy duty 14AWG red power wire suitable for cars, trucks, Jeeps, boats，marine ATVs, UTVs, SUVs, etc. Adding circuit protection for car alarms,car recorder, GPS, dashboard camera, VCD player, etc..
【waterproof rubber cap design】-This 14 Gauge heavy duty inline wiring harness with tight-fitting waterproof rubber cap,theses fuse link wire are not easy to fall off or enter water that can protect all standard blade fuse inside ,your car and electrical device from short circuit..
【Inline Blade Fuse Holder Easy Installation】This 12V-DC ATC/ATO TC/ATO in line fuse holder has long enough wire loop Length.
automotive fuse holder loop length: 11.8 inches / 30cm.Firstly,cutting the inline....

Check Stock

Radar Detector Hardwire Kit,Direct Wire Wiring kit for Escort Valentine One Uniden Beltronics Cobra Radar Detector Quick Connection Plug and Play Power Cord Cable(13FT RJ11)

[Upgraded the 2nd Generation Radar Detector Hardwire Kit] - You will get 1 x Radar Detector hardwire kit,1 x installing crowbar,4 x fuse tap cable,1 x Back-up fuses Radar Detector hardwire with the most popular fuse types will meet the applications for most car models.
[Multiple Fuse Sizes] Tap-A-Fuse in 4 Common Sizes ATC, ATS, Mini, and Micro 2 Comes With 5a Fuse For Each Tap-A-Fuse,plug and play No Soldering or tapping wires.
[Wide Compatibility] Our radar detector hardwire kit is suitable for Valentine One,Uniden R1 R3 R7 DFR7 DFR8,Escort Passport 9500i 8500 X50,Passport 7500S, 8500, 7500, 6800.
Beltronics STi Driver, Pro RX65, Pro RX55, Vector 995, 965, 955, 940, 895, and Express 795 Radar Detector,with RJ-11 "telephone style" jack..
[Easy Installation] Simple hidden wiring keeps the car neat and tidy and releases the cigarette lighter for connecting to more devices. TIPS: Please read the quick guide carefully before use..
[Worry-Free Sales Service] Each of our Radar Detector hardwire kit has undergone stringent quality testing.Cover any Radar Detector hardwire kit issues.Contact our customer service team at any time.

Check Stock

GNAWRISHING 16 AWG ATC/ATO Inline Fuse Holder(3PCS) and Standard Blade Fuse 5PCS of Each 1A, 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A Assorted Set

【PRODUCT STANDARD】Fuse Holders 16 gauge (AWG) red color 12 inch/30cm copper wire , and standard blade fuse: 0. 75 x0. 7 x0. 2 Inch. ( 1A, 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A) 5pcs each..
【PACKING QUANTITY】 3PCS 16 AWG ATC/ATO Inline Fuse Holder, 5PCS Blade Fuse of each 1A, 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A, total 45PCS Blade Fuses. 6PCS terminals connectors..
【QUALITY ASSURANCE】 It is tin-plated copper strands. This is a very high quality type of wire with excellent resistance to corrosion, and is typically found in marine grade products..
【WATERPROOF AND DUSTPROOF】Waterproof and dust proof capacity and reliable performance..
【OUR INDUSTRY LEADING ‘LOVE IT OR 100% of YOUR MONEY BACK’ GUARANTEE】 EACH AND EVERY Fuse Holder and Blade Fuse is COVERED with the ‘LOVE IT OR 100% of YOUR MONEY BACK’ GUARANTEE! If for ANY REASON YOU ARE NOT COMPLETELY SATISFIED with the Fuse Holder and Blade Fuse, we will REFUND the ENTIRE AMOUNT (or replace it free-of-charge)..

Check Stock

Wiring Harness,Eyourlife LED Light Bar Wiring Harness Kit 180W 12V 40A Fuse Relay On/Off Switch Relay 14AWG 12FT Length Heavy Duty Universal Fitment(2 Lead)

Eyourlife Switch Relay: Eyourlife IP56 waterproof power relay and blade fuse proctect circuit safety from overcurrent or short-circuit.Regulate the power to be consistent and prevent any surge..
2 Available Leads:One wiring harmess with two light output connectors gives you brilliant solution to install dual Led lights..
Detail:Operating Voltage: 12V,Amp: 40A ,Power Relay Fuse: 40A ,Blade Fuse: ≤180W.

Check Stock

YUNPICAR Mini Blade Fuse Holder 18 AWG Waterproof Connector Inline Fuse Holder with 5A ATM Fuses,2 Pack

Standard ATS 5A Blade Fuse ,Protecting circuits and electrical equipment. Easy to add additional circuits fit for cars, CD players, fax machines and etc..
High-quality :Fuse holders wiring harness select Tin plated copper as conductor to ensure its good bending performance, melting resistance and excellent electrical conductivity..
Easy to use:Just directly plug to the existing fuse holder, 18 AWG 9.4in red pigtail wire allow you to cut and splice it into any project. Keep your car and electric device in a safe condition.
Waterproof design, the rubber cap fits on tightly to protect any standard blade fuse inside. To enhance moisture-proof and waterproof performance and NOT easy to fall off or let water in.
Package Included: 2 X Mini Blade Fuse Holder and 2 X 5A Mini Blade Fuse.

Check Stock

MCIGICM 12 AWG Inline Fuse Holder with 30A ATC/ATO Blade Fuse 5 Pack

Heavy duty 12AWG wire, better protection to the circuit..
Wire length: 8.7 inches 12 gauge wire each side, Fuse holder dimension: 41x35x15mm.
Fits for 1A, 2A, 3A, 4A, 5A, 7.5A, 10A, 15A, 20A, 25A, 30A ATC/ATO blade fuse..
The rubber cap fits on tightly to protect any standard blade fuse inside..
Package included 5 x fuse holder & 5 x 30A blade fuse..

Check Stock