Top Black Quenching Iron Wire Reviews

5 Feet Nitinol Shape Memory Pre-trained Wire (1.0mm 40 C (18ga 104 F))

  • Trained straight - the wire is very soft and pliable at room temperatures, and becomes stiff and straightens out at a very low heat point of 40C (about 100F), making it suitable for demonstrations without getting burned..
  • 1.0 mm (0.04") diameter is very thick, this wire can hold or pull many pounds of weight and it is virtually unbreakable..
  • Wire can be trained to take on a different shape by heat treating it at 500C and quenching in water..
  • Thick, strong & smooth - black oxide finish is shiny and low friction, with a mysterious sheen..
Check Stock

BOENFU 3.5 Inch Mini Cutter with Lock Jewelry Small Snips Soft Wire Cutter Flush Cutting Pliers Diagonal Cutting Pliers Small Cutting Side Snips

  • ...G-LOADED MINI PLIERS: The internal spring automatically rebounds to return the tool to the open position,suitable for narrow space cutting operations for coil,which it is excellent choice for access in small areas.Easy and labor-saving, and improve work efficiency..
  • SHEAR ABILITY: The Flush Cutter has high frequency quenching flat cutting edge that sharp and durable.Can cut soft metallic line below 1.2mm,soft iron wire below 0.8mm,hardwire below 0.5mm.Do not exceed the scope of the use of pliers work. Otherwise it will damage the nippers..
  • MULTI-FUNCTIONAL PRECISION PLIERS: The Side Cutting Pliers is suitable for cutting soft wire, soft cable, nail decoration processing, jewelry processing, handicrafts, manual assembly model, fishing lines, electronic devices, thin plastic fringed, soft iron wire,headpins, eyepins,etc..
  • EXQUISITE & COMPACT, LIGHT & HANDY: Comfortable grip,and small size brings portability,which can be placed in toolboxes, tool bags, carry-on bags or even clothing pockets at any time.It is the preferred choice for factory maintenance, home maintenance, electrician maintenance, electronic products, DIY handmade,etc..
Check Stock

mingya Cutting Plier Tool Fencing Pliers, Red, 20*5*1.5 cm / 7.8*2*0.6 inch / L*W*H

  • 1. WIDELY USED. The wire cutter opening at 20 degrees, cutting distance could up to 0.4 inch. 2 sharp objects on the handle enable to pull nail and wire with ease. Suitable for cut chains, wire, mesh, threaded rod, heavy gauge wire etc in Shop, Home Or Service Field..
  • 2. LONG LASTING. The wire cutters use drop forged hardened alloy steel jaws, Through Integral heat treatment and high frequency quenching treatment for high hardness. Black oxide finish could anti corrosion. Cutting edges hardness about 64 hrc..
  • 3. HUMANIZED DESIGH. Lever design for excellent cutting performance. Non-slip plastic soft handle can be hold comfortably and firmly even when your hands are wet. Spring could help you open cutter easily. Wire latch holds handles together when not in use. Occupy less space..
  • 4. SAVING YOUR COST. Reinforced rivets allow pliers to be attached tightly and will not drop easily, ensuring a longer service life. The ergonomic handles help prevent hand fatigue during using..
  • 5. WARRANTY 6 MONTHS, If Quality Problems, A full refund or a new replacement can be arranged in warranty. Any problem please contact me. Please kindly advise free for your concerns.
Check Stock

entez Katana Sword Handmade Japanese Samurai Sword Damascus Steel,Full Tang,Real Steel,Razor Sharp

  • We have been always following the traditional production process. All the steps including material selection, forge, quenching, polishing and grinding....
  • 103cm / 40.55in Overall length, 26cm / 10.24in Ches in handle length, 71cm / 27.95in Blade length, 3cm / 1.18in Blade width, 0.7cm / 0.27in Blade....
  • This is a well-made folded steel Katana, following the traditional Japanese process. The blade is very sharp and folded 13 times resulting in 8,192....
  • Tsuba is made of round black iron, beautifully carved. The kasira-pommel/fuchi is made of black iron, the Seppa is made of yellow pure copper, and the....
  • This is a very fine samurai knife, and we use traditional techniques to make it. Each process is hand-made. We put two bamboo nails in the hilt as a....
Check Stock

Poodle Clipping and Grooming: The International Reference

  • ...using with 1/8" stainless steel wire rope WR01 and hydraulic crimper CR09. Package includes: 1pcs cable cutter.
  • Clean Cut - The blade of this wire rope cutter is quite sharp and durable since the blade is made of manganese steel and has been hardened by high-frequency quenching. This steel wire cable cutter can make exact and clean cuts without fraying or smashing the cable ends.
  • Safe and Easy - The safety lock prevents accidental opens and cuts that might hurt you. The ergonomic one-hand operation and non-slip rubber grips make it work easily. With telescopic spring and lightweight design , it is beginner-friendly and portable.
  • Pre-Designed System - We pre-designed a NightScape cable railing system to help you get a fully customized project, including black cable railing kit CB05, adhesive washer CR86, stainless steel cable WR17, cable cutter CR12, socket wrench CT16, drill template CT22, black posts PM05, lighting handrail HT11, handrail connector HA20 HA21.(Please note that the package ONLY contains contents as stated in bullet point 1, other stuff mentioned is NOT included).
Check Stock

JEDIST Flush Cutter, Sprue Cutter, Micro Cutter, ESD Wire Cutter, Stainless Steel Cut Tools with Spring Silicone Handle for Electronics Jewelry Model Craft Soldering Metal Plastic(Jed-05ESD)

  • ...utting edge is 0.51 inch. The rigidity is HRC56-58 and the weight is 2.47 oz. It can cut through copper wire with diameter of 1.3mm and iron wire with 1.0mm. It can cut above 10 AWG stranded electrical wire..
  • This wire cutter is made of martensitic stainless steel (8Cr13MoV).The steel is hardened through heating and quenching. This technology helps to enhance sturdiness and gives it a natural level of resistance against rust and corrosion even in marine, high temperature and humidity environment. The body of steel is heat-treated and bright-treated in vacuum and acid-free condition and its rigidity is 42-50HRC. The blade is heat-treated by high frequency wave and its rigidity is 56-58HRC..
  • The handle of flush cutter is ergonomically made. The cover of cutter grip is made of silicon which is non-slip and flexible. This sprue cutter is loaded a stainless steel spring that returns the jaws to the open position automatically and the joint is lubricated by oil. The cutting blades are perfectly aligned and the front of cutting edge can be closed tightly. The size is right for hands and the weight is proper. It fits properly in the palm of your hand and it is comfortable to cut..
  • The blades are aligned, so it can cut equally well along the entire cutting surfa....
Check Stock

Muzata 165ft Crystal Vinyl Coated Wire Rope 1/8\ Thru 3/16\ WR07 and Heavy Duty 18\ Hardened Cable Cutter CR03

  • ... DIY designs, commercial activities, wedding celebrations, and festival occasions.
  • This heavy duty cable cutter is hardened steel and great to clean cut 1/4" Stainless steel cable or galvanized aircraft wire rope cable. This cable cutter is Muzata nwest version has rounded tapered thicker jaws made of high frequency quenching of forging edge of chromium vanadium steel for clean cable cuts every time..
Check Stock

Steel DN Mate 7.6" Steel Wire Cutter, Cut All Wires Up to 5/32", Wire Rope Cutter, Cut Steel Cable, Aircraft Cable, Wire Seals, Bike Cable, Aluminum/Copper Wire, Fence Cable, One-Hand Operate CC-11

  • ...able, guitar strings, and garage door cables,baling wire, aircraft cable. It can be used widely. It cuts like BUTTER, you can find 1/8” stainless steel wire cable by search DW11..
  • 【Sharp & Clean Cut】The blade is made of manganese steel and hardened by induction quenching. It is very sharp and durable. The steel cable cutter make precise and clean cuts, not fraying and smashing cable ends..
  • 【Easy to Use】First, turn the black lock to open, put the cable into the middle of the blade, then press the handle to cut it. It can one hand operation. The safety lock protects you from accidentally opening it and causing injury..
  • 【Max Cuting Capacity】Up to 5/32" Steel Wire Rope, 3/16" Hard Steel Wire, 3/16" Aircraft Cable, 15/64" Copper & Aluminum Cable, 1/4" Soft Wire Rope..
  • 【After-Sales】If you have any issue, please feel free to contact us. Note, there is coating of lube or grease for rust protection in the cutter head, you can easily wipe off with a paper towel..
Check Stock

Sanuke Cable Cutters, 6-Inch High Leverage Cable Cutter Heavy Duty---Multifunctional Compact Sharp Cutting for Aluminum, Copper, Wire, Communications Cable

  • 【High Quality Wire Cutter】6-inch cable cutter is forged with chrome vanadium steel through heat treatment, high hardness, durable and wear-resistant. The inclined surface design of the jaw can avoid the collision and damage of the two cutting edges during operation..
  • 【Sharp and Smooth Cuts】Through high-frequency quenching, polished and hardened, the jaw of cable cutter is really sharp. The shear force is strong, durable and the cutting is smooth, performing well even in confined spaces..
  • 【Multifunctional Cable Cutter】Double-blade design, one-cut for two purposes. The small blade can be used for stripping thin wires while big blade is used to cut large wires..
  • 【PVC Non-slip Handle】Non-slip PVC material and matte sense handle, is comfortable to grip. PLEASE NOTE: the handle is not insulated, do not cut live wires..
  • 【Cutting Rang】This cable cutter is suitable for cutting soft wire like copper, aluminum or communication cables. PLEASE DO NOT cut steel, iron wires, steel strands, steel core cables, and hard steel wires..
  • 【Compact Cable Cutter】6-inch cable cutter looks compact. It’s convenient to carry that you can put in your pocket easily..
Check Stock

Master Grade Bonsai Tools 205 Mm Wire Cutter

  • Name: wire cutter JTS- 10, Brand: TianBonsai.
  • Cutting Function: Cut training copper wire less than 8 mm in diameter..
  • Edge Hardness: HRC58, quenching by the high frequency coil.
Check Stock

Chim Chim Cher-ee (From "Mary Poppins"/Soundtrack Version)

  • 1.Ultra Tough and Durable Side Cutters: Forged from tempered CR-V Steel, the jaws are hardened by induction heating and quenching..
  • 2. Spring-loaded dikes pliers, High-leverage design, minimizes hand fatigue from repetitive work. A Superior Labor-saving Diagonal Pliers..
  • 3. Wire Cutters Heavy Duty: The long jaws can cut steel wire up to 1.6 mm/0.063 inch and copper wire up to 9 gauge..
  • 4.Comfortable Padded Handles: It offers a higher performance and enables to easily identify..
  • 5.Ideal Diagonal Cutters for cutting artificial flowers, chicken wire and electrical work..
Check Stock

Muzata 330ft Black Vinyl Coated Stainless Steel 3/32inch Thru 1/8inch Wire Rope WR11 Bundle with Cable Cutter up to 5/32\ with 6Pcs Ferrules CR12, CT1

  • ...ircraft 1/8" stainless steel wire rope WR01 and hydraulic crimper CR09 are recommended to use with. 6 pcs 1/8 cable wire ferrules are included as a gift.
  • Clean Cut -- The blade of this wire rope cutter is quite sharp and durable since it is made of Chrome Vanadium (CR-V) steel and has been hardened by high-frequency quenching. This steel wire cable can make exact and clean cuts without fraying or smashing the cable ends.
Check Stock

ANBES Soldering Iron Kit, Upgraded 60W Adjustable Temperature Welding Tool with ON-OFF Switch, 8-in-1 Screwdrivers, 2pcs Soldering Iron Tips, Solder Sucker, Wire Cutter,Tweezers,Soldering Iron Stand

  • Please switch to the 200 model when not using and please do not keep the soldering iron stay at high temperature all the time,which makes it easy for the iron core to accelerate oxidation and burn out, shortening its life..
  • Please melt a little solder wire on the tip of soldering iron after use, if there is black oxide on the tip, the tip may not be tinned and must be cleaned firstly..
  • Tighten the screws of the soldering iron table with pliers..
  • Try to use low temperature soldering.High temperatures will accelerate the oxidation of the tip. If the tip temperature exceeds 450 C, its oxidation rate is twice that of 380 C..
  • When welding, do not apply too much pressure, otherwise the tip will be damaged. As long as the tip can fully contact the solder joint, heat can be transferred. In addition..
Check Stock