Top Black Filled Ptfe Rod Reviews

Sterling Seal & Supply, SSS165LA.187x1-V Expanded Flexible Graphite Filled PTFE Braided Packing 3/16\ Cross Section, 1' Cut Length 165LA-V.187\

  • Graphite filled ptfe (commonly called gfo) fiber with excellent thermal conductivity and chemical resistance.
  • Graphite filled ptfe fiber is excellent with thermal conductivity and will not harden.
  • Applications include corrosives, chemicals, solvents, water, steam, gases, air, ammonia, oils, liquor, paper stock, and condensate. Marine shaft packing that is ABS approved and used by the US Navy..
  • Shaft speeds to 4400 FPM, and withstands pressure up to 300 psi/20 Bar. pH 0-14 (Not for chlorine service).
Check Stock

DONLAB EBT2 1000ml Glass Separatory Funnel Set, PTFE Stopcock with Steel Support Stand, Clamp and PP Holder

  • 1000ml glass separatory funnel with PTFE stopcork.
  • Stamping steel stand: 8"x5” | 21cmx12cm.
  • Rod height: 20" | 50cm, Road dia 3/8" | 10mm.
Check Stock

Mastercool Refrigerant Recovery Tank 30LB / 50LB / 100LB - USAlab

  • ● This platinum plate electrode is widely used in electrochemical study. It is an important accessary for electrochemical work-station and three-electrode cell. Besides, the platinum electrode is also used as insoluble anode in electrolysis process..
  • ● The electrode is coated with PTFE (polytetrafluoroethylene), and the size of PTFE is 80mm × φ6.4mm. The terminal is gold-plated copper rod (15mm × φ2mm)..
Check Stock

TIKSCIENCE 6AN E85 PTFE Fuel Line 20FT Hose Kit - Hose ID 0.315inch - Nylon Braided Fuel Injection Line for Automobiles or Marine Engines, for Racing Cars and Motor Racing Bikes - 10 Fittings

  • ...itment - ID: 5/16". OD: 0.465inch.Length: 20 feet(6M). Please measure before purchase! (Includes: as shown in the picture.).
  • High Quality Material - The hose is made of high-quality PTFE, which has good chemical resistance and heat resistance. The outer layer is woven black nylon, which has high durability, extreme pressure resistance, and a professional and high-tech appearance..
  • High Performance - The high-performance AN-6 nylon and stainless steel braided high-pressure PTFE fuel line kit is much more resistant to high temperatures and extreme environments. The PTFE lined hose is compatible with all vehicle fuels, lubricants and coolants. Teflon hoses are relatively hard and cannot be bent..
  • Warm Tips - 1.Avoid twisting hose when installing 2.Allow some slack in assembly for changes in length that occur underpressure 3.When routing hose line, provide a smooth bend radius.4.Avoid sharp bends which may cause hose tocollapse and restrict flow..
  • Package Include - AN-6 Black Nylon PTFE Fuel Hose x 20ft, AN-6 Straight PTFE Fitting x 4, AN-6 45 degree PTFE Fitting x 2, AN-6 90 degr....
Check Stock

Magnetic Stirrer Stir Bars Mixer Stiring Rod : 6 Shapes + Magnetic Retriever

  • Quantity：6 PCS stir bars of different sizes and shapes +1 PCS Recycling rod.
  • Suitable for mixing various liquids :Corrosion resistance,No adhesion,Non-toxic.
  • Material : PTFE (Polytetrafluoroethylene), Good Plastic Bag Packing : Clean.
  • New & Strong Magnetic, High-quality & Precise sizes.
  • Recycling rod is Soft and flexible, Light and Smooth, easy to handle.
Check Stock

WATERWICH Fuel Injection line Hose 6AN 3/8'' 25FT PTFE EFI LS Fitting Kit Stainless Steel Braided

  • 1.Constructed of Premium Material: The injection fuel line made of black nylon fiber braided outer cover, 304 stainless steel wire braided middle layer, and a PTFE synthetic inner line. Not recommended installation in corrosive environment, 6AN braided fuel line's service life will be influenced..
  • 2.Wide Application:The 6AN PTFE fuel line mostly used in EFI LS system and can be worked with petrol, diesel, oil, hydraulic fluid, pump gas, alcohol, E85, coolant, fuel. PTFE fuel line most stronger to extreme circumstances than the nylon braided fuel line. long service life, wear resistance and high temperature resistance..
  • 3.Operating Temperature Can Even Use it at -76℉(Min) or 446℉(Max) (-60℃ to 230℃). Maximum Working Pressure(psi) : 3000psi. Bursting Pressure(psi) : 10000psi. PTFE tube fuel hose length: 25Ft, inner diameter: 0.3inch (8mm), outside diameter: 0.47inch (12mm) . Please make sure the dimension, pressure and temperature range before purchase!.
  • 4.Package Included: 25Ft 6AN braided fuel injection line hose , fuel PTFE tube and aluminum alloy fitting adapter: 6pcs 6AN PTFE straight hose end, 2pcs 6AN PTFE 45 Degree hose end, , 2pcs 6AN to 3/8" hose adapter fitting, 2pcs 6AN to 1/4"NPT hose adapter fitting , 1pc AN6 to 3/8"quick disconnect ....
Check Stock

DONLAB RKF-0005 Glass 5L Double-Layer Cylindrical Jacketed Chemical Reaction Kettle Flask,Explosion Proof Motor Reactor

  • Power supply:110V / 60HZ .Stirring Power:60W,Stirring Speed:20-600r/min.
  • Stirring rod:the material of stirring rod is PTFE of stainless steel 304.
  • GG17 Borosilicate 3.3 glass,high temperature experiment(max temperature is 250℃) and low temperature experiment(min temperature is -60℃).
  • Inside and Outside glass cylinder diameter:200mm/230mm. Package Dimension(MM):440*320*840.
Check Stock

Monroe Shocks & Struts Magnum Light Truck 550064 Shock Absorber

  • Robust hydraulic lock-out: Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly - on most applications.
  • PTFE coated bearing: Reduces friction during operation between the rod and rod guide, improving durability - on most applications.
  • Tenneco shouldered bushings: Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability - on most applications.
  • Nitrogen gas-charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration.
  • Loop welding technique: Provide up to 14,100 lbs. (6,395 kg) tensile strength for maximum durability.
Check Stock

Monroe Shocks & Struts Magnum Light Truck 550061 Shock Absorber

  • Robust hydraulic lock-out: Prevents over-extension of the suspension, top-out of the piston and averts damage to the seal assembly - on most applications.
  • PTFE coated bearing: Reduces friction during operation between the rod and rod guide, improving durability - on most applications.
  • Tenneco shouldered bushings: Shouldered bushing and bonded bushing with sleeve designs prevent (bushing walkout) for improved quality and durability - on most applications.
  • Nitrogen gas-charged: For improved ride and handling, helps maintain tire to road contact by reducing aeration.
  • Loop welding technique: Provide up to 14,100 lbs. (6,395 kg) tensile strength for maximum durability.
Check Stock

Eleventree 2 Pack RV Magnesium Water Heaters Anode Rod with Teflon Tape,Anode rods for RV Water Heater, Extends The Life of Suburban and Mor-Flo Water Heaters Tank-3/4\NPT Threads 9.25 Length

  • Corrosion Protection: Extends the life of a water heater by attracting corrosive elements in the water. The exclusive suburban anode rod absorbs the corrosive action caused by hot water and prolongs the life of your water heater tank..
  • Size and Material Typle: Magnesium anode rod, 9.25" long,¾" threads , Uses a 1-1/16’’ socket,Adding PTFE tape accessories.
  • Reliable quality：High quality rv hot water tank anode rods are a perfect replacement for suburban 232767 and Mor-Flo 6 Gallon water heater anode rod..
  • Pack of 2: Unscerw the anode rod to drain the tank. If the rod is mostly eaten away, replace with a new one. Always keep a spare in your RV..
  • Wide application: Suitable for Suburban & Mor-Flo water heaters (6/10/12 Gallon).
Check Stock

Focus Foodservice Pan, 24 Cup, Jumbo Muffin

  • Reinforced rod keeps pan from warping during baking.
Check Stock

LTI Universal 10ft Nylon Stainless Steel Braided 5/8\ AN10 PTFE E85 Fuel Line Hose Injection (BLACK, 10AN)

  • ... racing cars & motor racing bikes. Working temperature range: -76℉ to 446℉ (-60℃ to 230℃). Pressure Rating: Maximum Working Pressure (psi): 2000 psi. Bursting Pressure (psi): 6000psi..
  • This hose is made of high-quality PTFE on the inside that gives them high chemical and heat resistance, along with a braided Black Nylon outside which gives them high durability, extreme pressure resistance, and Professional installation is highly recommended..
  • 10AN PTFE E85 Fuel Hose Length: 10ft. Inner Diameter: 0.5" (12.95mm). Outside Diameter: 0.62" (16mm) . Please measure before purchase! Fit for AN PTFE hose end fitting ONLY..
  • We Provided 12 months warranty from the date of purchased. Free return within 30 days NO QUESTION ASK..
Check Stock

Monroe Shocks & Struts 58654 Shock Absorber and Coil Spring Assembly

  • REDUCES SAG UNDER LOAD -- Ideal for occasionally hauling or towing varying loads.
  • heavy gauge, calibrated coil spring reduces sag when loaded up to 1,200 lbs. (capacity limited by suspension, tires and transmission.
  • EXCEPTIONAL HANDLING -- Tuned specifically for each application, full-displaced valving automatically adjusts to road extremes to provide ride consistency.
  • CONSISTENT RIDE -- OE all-weather fluid contains special modifiers to handle extreme temperatures and PTFE-banded piston helps reduce friction between the piston and pressure tube to enhance responsiveness to changing road surfaces.
  • LONGER SERVICE LIFE -- Self-lubricating fluid seal retains gas and reduces excessive friction against the piston rod to help reduce premature wear while heavy-duty nitrocarburized rod delivers long life.
  • IMPROVES PERFORMANCE -- Nitrogen gas-charge maintains tire-to-road contact for improved ride and handling by reducing aeration and shock fade.
Check Stock