Top Billet Machined Reviews

All Sales 96195K Grille Emblem - Black

  • Full billet replacement for easy installation.
  • Includes an installation instruction manual.
  • Made in USA.Each piece is CNC machined from a piece of billet aluminum.
Check Stock

MSD 85827: Distributor, Ford V8, 302

  • Pre-installed Bronze Gear for aftermarket billet roller camshafts.
  • Gear machined from AMPCO 45 aluminum bronze containing 5% Nickel.
  • CNC machined billet 6061-T6 aluminum housing.
  • Maintenance-free magnetic pickup and precision reluctor create stable trigger signals throughout the rpm range.
  • Must be used with an MSD Ignition Control.
Check Stock

Mota Performance A70410 Billet Aluminum Alternator Pulley Single Groove 2.8\ Diameter

  • CNC Machine balanced Billet Aluminum construction.
  • Quality Corrosion Resistant Clear Anodized Machined finish.
  • Light weight design improves throttle response.
  • For best belt alignment use all the same brand pulleys.
Check Stock

PACEWALKER Baking Paint 1 Pair Motorcycles Slash Cut Exhaust Muffler Pipe for 1-3/8\

  • Featuring large 4-inch mufflers finished with raceinspired CNC machined billet end caps, Eliminator 400s are tuned to give compatible with Harley-Davidson baggers a deep and aggressive roar..
Check Stock

BILLET SPECIALTIES SCRIPT LS CAST VALVE COVERS,BLACK,# BLK95423

  • Pair of Brand New Chevrolet Script LS Cast Valve Covers (Black). Produced by Billet Specialties Inc. (Part #BLK95423)..
  • Features: Precision machined Chevrolet script logo | Precision cast valve covers | Includes valve cover gasket | Includes mount hardware | Screw in aluminum oil cap.
  • Give your LS motor that classic and traditional look with Billet Specialties Chevrolet script cast valve covers. Each precision cast valve cover is powder coated Black then machined with the iconic Chevrolet script. Sold in pairs..
Check Stock

MSD 8366 Pro-Billet EFI Distributor

  • Drop-in billet replacement for GM distributors with the small cap and external coil.
  • Factory style ignition module accepts factory wiring.
  • CNC machined billet aluminum housing and billet aluminum base.
  • Magnetic pickup and precision reluctor create stable trigger signals throughout the RPM range.
  • Oversized steel shaft is QPQ coated and guided by a sealed ball bearing and an extra long sintered bushing.
Check Stock

Outlaw Racing Rear Billet CNC Axle Blocks for Kawasaki KX250F 2004-2020, KX125 2003-2007, SUZUKI RMZ250 2004-2020 Blue

  • The Pro Circuit Axle Blocks are CNC machined from billet aluminum for light weight and durability..
  • The axle blocks have adjustment lines on the side which make for precise and easy wheel alignment..
  • Adjustment lines for easy wheel alignment..
Check Stock

Johnson Level & Tool 1411-0600 Magnetic Billet Torpedo Level, 6\

  • FUNCTIONAL LEVEL: This leveler features powerful GripTight v-groove rare earth magnets that hold flat or round ferrous metal surfaces, offering hand-free use..
  • SECURE DESIGN: The surface-level features a stainless-steel screw conduit lock for accurate bend offsets..
  • QUALITY CONSTRUCTION: The Johnson level has a solid billet aluminum frame that promises excellent durability. The CNC machined level has heat dissipation for welding..
  • ACCURATE READING: The checkpoint level has a machined vial opening that provides accurate readings effortlessly..
  • HIGHLY RELIABLE: The 6 in. Magnetic Billet Torpedo Level has four vials that measure 0°, 30°, 45°, and 90°..
Check Stock

Johnson Level & Tool 1411-0900 Magnetic Billet Torpedo Level, 9\

  • FUNCTIONAL LEVEL: This leveler features powerful GripTight v-groove rare earth magnets that hold flat or round ferrous metal surfaces, offering hand-free use..
  • QUALITY CONSTRUCTION: The Johnson level has a solid billet aluminum frame that promises excellent durability. The CNC machined level has heat dissipation for welding..
  • ACCURATE READING: The checkpoint level has a machined vial opening that provides accurate readings effortlessly..
  • IDEAL APPLICATIONS: The Magnetic Billet Torpedo Level is ideal for plumbing, welders, and electrical contractors. It fits perfectly on pipe and conduit.
  • PRODUCT SPECIFICATIONS: The Torpedo Level is available in a black shade with four vials that measure 0°, 30°, 45°, and 90°..
Check Stock

Supreme Suspensions - 4pc Set [Black] 2 Wheel Spacers for 2010-2014 Dodge Ram 2500 3500 2WD 4WD - BP 8x165.1mm | CB 130mm | Studs M14x1.5-4 Tire Valve Caps Included

  • COMPATIBLE WITH 2010 - 2014 Dodge Ram 2500 & Ram 3500 (2WD 4WD). *Does NOT fit models with DUALLY setup. Ram 2500 & Ram 3500 models were released with....
  • CONTENTS: (4x) T6 Billet Aluminum Lug Centric Wheel Spacers with Precision-Machined Splined Studs, (4x) T6 Billet Aluminum Tire Valve Stem Caps with....
  • SPECIFICATIONS: 2 Inches Thick, 8 x 6.5" (8 x 165.1mm) Bolt Pattern, M14 x 1.5 Studs, 130mm Center Bore Without Lip | NOTE: Spacers are lug-centric,....
  • BENEFITS: Positions your wheels 2 inches outward on each side to correct tire rubbing issues, increase cornering stability, and allow for a more....
  • UNIVERSAL TIRE VALVE STEM CAPS: Included with purchase are 4 Universal Tire Valve Stem Caps precision CNC machined from Light-Weight T6 Billet....
Check Stock

Grom Fender Eliminator (2016-2020) - New Rage Cycles

  • New Rage Cycles hits the market with a custom designed fender eliminator kit..
  • This kit completely cleans up the back of your bike with the brightest signals and brake light on the market! The license plate bracket is constructed from billet aluminum and black powder coated, and tucks up underneath your tail, providing a very clean.
  • This plug-and-play kit saves you time and money on installation, and lets you plug right in and ride on! LED license plate light provides you with everything you need for a very clean fender eliminator kit..
  • The turn signal lenses are CNC-machined from polycarbonate and the turn signal bracket is machined from billet aluminum..
  • New Rage Cycles uses extremely bright 1 mm LEDs, giving you outstanding turn signals...day or night! Hardware is provided with your kit should you want to mount the passenger pegs (where required)..
Check Stock

Supreme Suspensions - 4pc Set - Silver - 2 Hub Centric Wheel Spacers for Toyota Tacoma PreRunner 2WD & Tacoma 4WD - BP 6x5.5 / CB 106mm / Studs M12x1.5 [4 Tire Valve Caps Included]

  • COMPATIBLE WITH 1995 - 2020 Toyota Tacoma PreRunner (6-Lug 2WD) and 1995 - 2021 Toyota Tacoma (4WD). *Will NOT work on vehicles with DUALLY wheels or....
  • CONTENTS: (4x) T6 Billet Aluminum Hub Centric Wheel Spacers with Precision-Machined Splined Studs, (4x) T6 Billet Aluminum Tire Valve Stem Caps,....
  • SPECIFICATIONS: 2 Inches Thick, 6 x 5.5" (6 x 139.7mm) Bolt Pattern, M12 x 1.5 Studs, 106mm Center Bore | NOTE: Spacers are Hub-Centric to ensure the....
  • BENEFITS: Positions your wheels 2 inches outward on each side to correct tire rubbing issues, increase cornering stability, and allow for a more....
  • UNIVERSAL TIRE VALVE STEM CAPS: Included with purchase are 4 Universal Tire Valve Stem Caps precision CNC machined from Light-Weight T6 Billet....
Check Stock

Supreme Suspensions - 2' Wheel Spacers Kit for 2001-2010 Ford Explorer Sport Trac 2WD 4WD - BP: 5x4.5 / CB: 87.1mm / Studs: 1/2' x20 [4pc Black Pack] - 4 Tire Valve Caps Included

  • COMPATIBLE WITH 2001 - 2010 Ford Explorer Sport Trac (2WD 4WD). *Does NOT fit models with DUALLY setup. Please verify fitment compatibility prior to ordering..
  • CONTENTS: (4x) T6 Billet Aluminum Lug Centric Wheel Spacers with Precision-Machined Splined Studs, (4x) T6 Billet Aluminum Tire Valve Stem Caps, Installation Hardware, and Supreme Suspensions Pro Pack.
  • SPECIFICATIONS: 2 Inches Thick, 5 x 114.3mm (5 x 4.5") Bolt Pattern, 1/2" x 20 Studs, 87.1mm Center Bore | NOTE: Spacers are lug-centric, and centered using the precision machined taper seat on the lug-nuts. Centering rings are recommended for certain types of OE or Aftermarket wheels..
  • BENEFITS: Positions your wheels 2 inches outward on each side to correct tire rubbing issues, increase cornering stability, and allow for a more impressive stance. Features Hydraulic Pre-Pressed Studs to help eliminate the risk of vibrations. Easy bolt-on installation takes just minutes with standard hand tools. *Note: Factory wheel studs may need to be shortened to ensure safe fitment of the wheel. We recommend the use of a Torque Wrench to ensure proper tightening of hardware..
  • UNIVERSAL TIRE VALVE STEM CAPS: Included with purchase are 4 Universal Tire Valve Stem Caps precision CNC machined from Light-Weight T6 Bil....
Check Stock