Top Bilge Pump With Hose Kit Reviews

ATTWOOD TSUNAMI T500 AERATOR PUMP 12V Item Category Marine Plumbing & Ventilation Sold Per

  • Contains everything needed to install the included Tsunami T500 bilge pump.
  • Pump with innovative engineering and compact design provides most reliable aeration in contained spaces such as livewell.
  • Kit includes 3/4-inch interior diameter x 5-foot-long corrugated hose.
  • Thru-hull fitting for 3/4-inch interior diameter hose.
  • Kit has 2-way on/off switch with a bezel plate and 2 Snap-It hose clamps.
Check Stock

LINGVUM Bilge Pump for Kayak Canoe and Boat - 17 Inch Manual Portable Kayak Hand Water Pumps with Reversible Hose Orange

  • CONVENIENT BILGE MANUAL WATER PUMP --- Our manual bilge pump length is 16.5", the maximum unfolded length is 25.5", equipped with a 23.2"long hose. At the same time, Our bilge pump has two water inlets and a long hose that attaches to either end, removing water quickly and reducing your fatigue.
  • MAKES WATER REMOVAL EASIER --- The maximum displacement is 0.4L each time. The premium rubber seal creates a watertight seal that won't come loose or leak allowing for the maximum amount of suction and discharge that performs better than other hand bilge pumps. Suction spacers can allow water to flow into the manual water pump at the fastest speed.
  • SCENE TO BE USED --- Perfect for emergency water removal in boats, kayaks, canoes or dinghies. With our kayak bilge pump, rest easy knowing that you’ll have a quick and easy way of removing water in those difficult times. Spending time on the water is supposed to be fun! Perfect boating and kayaking accessory.
  • LIGHTWEIGHT & PORTABLE --- This kayak hand pump is light (Only 0.78 pounds), easy to carry and store. Foam padded handgrip is non-slip and provides buoyanc....
Check Stock

Shoreline Marine Bilge Pump with Float Switch, 800 GPH

  • The pump securely clips into the mounting base for easy installation and for removal to clean and inspect the pump.
  • The self-contained automatic switch will detect water and automatically turn the pump on, when the water is gone shut the pump off.
  • The automatic bilge pump is completely submersible with a water pumping capacity of 800 GPH.
  • The ¾” O.D. outlet hose barb is designed to be used with standard ¾” I.D. bilge hose.
  • It’s ignition protected, uses a very low 5 amps operating current the wires are tinned marine grade.
Check Stock

AMRM-4505-7 Attwood Sahara Automatic Bilge Pump - 500 GPH

  • The Attwood Sahara Bilge Pump is a durable, compact, and easy to install automatic bilge pump. The Sahara has everything contained in one compact yet durable package, making this pump a great option for tight spaces. This series of bilge pump features a 316 stainless steel motor shaft for corrosion resistance and a durable high-impact, glass-filled polyester impeller. The base of the pump has quick, one-handed removal for easy disassembly for cleaning..
  • Pumps include 36" lengths of 16-gauge caulked and tinned copper wire. An automatic-switch bilge pump is a requirement for any vessels 20’ especially those that accommodate overnight passengers and crew. All Attwood bilge pumps come with a 3 year manufacturer's warranty..
  • Mercury-free switch. Test knob for easy operational check Non-restrictive float movement. Larger filter area resists clogging.
  • Free flow of water around housing keeps motor cool. 316 Stainless Steel motor shaft for saltwater corrosion resistance. Durable high-impact, glass-filled polyester impeller.
  • Sahara S500 Part #: AMRA-4505-7, GPH at Open Flow: 500, GPH at 3.3' Head: 350, Hose Size: 3/4" I.D..
Check Stock

attwood Sahara MK2 800 GPH 12-Volt Automatic Bilge Pump

  • 800 GPH, 12V, Fuse size: 4A, Outlet type: 3/4" & 1" barbs, Check valve: yes, Wire length: 29 1/2".
  • The easiest, most reliable automatic bilge pump ever designed.
  • The only automatic bilge pump that eliminates air-locks, Patented X-Air Impeller ejects trapped air in the pump and pipework.
  • Flexible Outlets: 90° rotatable elbow outlet allows users to install the pump anywhere in a full 360° orientation.
  • Single-Hand Pump Cartridge Release: Convenient when trying to access a pump located in a hard-to-reach area of the boat’s hull.
  • Universal Backwards Compatible Design: 7-pump mounting hole pattern for replacing any top bilge pump in its category.
  • SteadySwitch: Buoyancy control reduces cycling, draining the bilge not the battery.
  • No Pipe Or Hose Removal Required: Reduces the time that it takes to replace the cartridge.
  • Improved Motor Cooling/Heat Dissipation: Prevents overheating that may cause failures, such as blown fuse, leaking, etc..
  • Includes straight outlet and check valve.
Check Stock

Bilge Pump Hose, 1-1/8 Inch Dia Bilge Pump Installation Kit, 6 FT Premium Quality Kink-free Flexible PVC Hose, 2 Stainless Steel Clamps and Thru-Hull Fitting.

  • The bilge pump hose is made of high-quality PVC material, which is light and durable. And it is resistant to oils, solvents and chemicals..
  • Corrugated helix, kink-proof construction with an excellently tight bend radius ensures maximum durability and maintains a steady flow..
  • Kit includes 6 FT of 1.125" Inner Diameter hose, 2 stainless steel worm gear hose clamps, and 1 thru hull connector..
  • Thru-hull fitting accommodates up to 1-1/4 inch hull thickness.
Check Stock

Maxzone Bilge Pump Installation Kit Bilge Pump Hose 1-1/8-Inch Dia Plumbing Kit | 6 FT Premium Quality Kink-free Flexible PVC Hose | Includes 2 Hose Clamps and Thru-Hull Fitting

  • Complete installation kit for bilge pumps with 1-1/8 inch outlet..
  • Kit includes 6 FT of 1.125" ID (Inner Diameter) hose, 2 stainless steel worm gear hose clamps, and 1 thru hull connector..
  • Cuff-less design with smooth inner bore prevents leaks at connection ends. Easy to cut to any desired length. Ideal for marine or freshwater boating.
  • Corrugated helix, kink-proof construction with an excellently tight bend radius ensures maximum durability and maintains a steady flow..
  • Please verify your bilge pump outlet size before purchase. Not for use with below waterline thru-hull connections..
Check Stock

Z care LVP Marine Boat Cleaner (3)

  • I.D.: 1 1/8" or 28.6mm, length: 50' or 15.2M, Bend Radius: 1" or 25.4mm, VAC rating: 20, color: White.
  • Note: Do not attach to thru hull fitting below the water line.
  • Shields Bilge flex Hose is a single layer corrugated polyethylene hose.
  • It is resistant to mild chemicals and salt water and there is a clamping cuff every foot.
  • This hose is primarily used for bilge pump discharge.
Check Stock

Newport Kayak Hand Bilge Pump, Blue

  • DUAL ACTION: Our Kayak Hand Bilge Pump is dual action, meaning whether you're pushing or pulling, it's still pumping water out of your boat..
  • FLOATING: If you drop it overboard, this pump will float back up to the surface for you..
  • EJECTION TUBE: Our pump includes an ejection tube, so the water you pump doesn't end up back in your boat..
  • WHY: Quickly pump water out of the floor of your kayak, canoe, jon boat, inflatable dinghy, sailing dinghy, or other small watercraft. Use the ejection hose to clear the hull so the water isn't ending up back in your boat..
  • INCLUDED IN BOX: Kayak Bilge Pump w/ Foam Float, Water ejection tube.
Check Stock

Dontmiss Automatic Submersible Small Boat Bilge Pump 12v 1100gph Auto with Float Switch bilge pump for boat(Outlet Diameter：1 1/8\) (1100GPH)

  • LONG HOSE FOR EASY WATER REMOVAL: A 39" long hose lets you reach deep areas to discharge with ease. 1" intake nozzle, 14" chamber and 1.25" diameter hose to remove water quickly. 115 cubic inches per pump or 1 gallon removal in 2 to 3 pumps..
  • NO CLOG FILTER & WATERTIGHT GASKET: A rubber seal creates a watertight seal that won't leak allowing for maximum suction with the manual water pump. Features a filtered nozzle to prevent seaweed, leaves and debris from clogging the hand siphon pump..
  • LIGHTWEIGHT, PORTABLE & IDEAL FOR EMERGENCIES: The hand pump is light and easy tostore, making it perfect for emergency use in small boats, kayaks, canoes or dinghy. Does not require power making it ideal as an emergency bailer or in kayaking..
  • EXCEPTIONAL QUALITY: Our marine-grade bilge pump is specially designed to quickly remove water from hard to reach places season after season. We use premium materials not found in other lesser quality boat, RV, car and home products..
  • WHY BETTER BOAT: We are a family owned American business committed to making premium quality interior & exterior RV care and boat cleaning supplies. We stand behind your satisfaction and our hand water pump or hand held bilge pumps for boats..
Check Stock

BBH Marine Boat Plastic Thru Hull Fitting Drain Fits 1\ Inch Hose

  • This fitting should be used above the waterline..
  • Our Thru-Hulls are meant for installation through the transom and are good for overflow use in livewell installations or as an exhaust port for a bilge pump..
  • Their construction is designed to resist degradation as a result of chemical and saltwater exposure..
  • Thru hull bilge fitting for Marine/Boat/Yacht..
Check Stock

Manual Bilge Pump for Boats Kayak Canoe Hand Water Pump | Hand Pumps Siphon Pump Bailer Kayaking Boat with Hose Portable Held 20 Gallons Per Minute Suction Marine Grade Regular

  • LONG HOSE FOR EASY WATER REMOVAL: A 39" long hose lets you reach deep areas to discharge with ease. 1" intake nozzle, 14" chamber and 1.25" diameter hose to remove water quickly. 115 cubic inches per pump or 1 gallon removal in 2 to 3 pumps..
  • NO CLOG FILTER & WATERTIGHT GASKET: A rubber seal creates a watertight seal that won't leak allowing for maximum suction with the manual water pump. Features a filtered nozzle to prevent seaweed, leaves and debris from clogging the hand siphon pump..
  • LIGHTWEIGHT, PORTABLE & IDEAL FOR EMERGENCIES: The hand pump is light and easy tostore, making it perfect for emergency use in small boats, kayaks, canoes or dinghy. Does not require power making it ideal as an emergency bailer or in kayaking..
  • EXCEPTIONAL QUALITY: Our marine-grade bilge pump is specially designed to quickly remove water from hard to reach places season after season. We use premium materials not found in other lesser quality boat, RV, car and home products..
  • WHY BETTER BOAT: We are a family owned American business committed to making premium quality interior & exterior RV care and boat cleaning supplies. We stand behind your satisfaction and our hand water pump or hand held bilge pumps for boats..
Check Stock

Shoreline Marine Fully Submersible Bilge Pump 600GPH with ¾’ Outlet Hose Barb

  • Fully submersible 600 Gallons per hour bilge pump with a self-contained automatic switch to maintain a safe water level.
  • Features a durable plastic housing that can withstand the harshest marine environment.
  • Comes with a universal mounting base for effortless installation and cleaning.
  • With a tough stainless-steel impeller shaft and tinned marine grade wiring for a steady and reliable performance.
  • The outlet hose barb measures ¾’ that can fit a common ¾ bilge hose and thru-hull fittings.
Check Stock