Top Bilge Cleaner Reviews

TotalBoat TotalBilge Epoxy Based Bilge Paint for Boat Bilges, Bulkheads, Engine Rooms and Locker Areas (Gray, Gallon)

  • prime prepared metals with TotalBoat TotalProtect.
  • for fiberglass prime with TotalProtect if desired.
  • for wood use TotalBoat Topside Primer if desired.
  • EASY TO KEEP CLEAN: Remove grease, oil, and grime from the high-gloss finish using a cleaner/degreaser. TotalBilge won't lift, crack, peel, or stain.
  • CHOOSE COLOR AND SIZE: Available in White and Gray colors, in Quart and Gallon Sizes. COVERAGE: 250-300 sq ft/gal.
  • THINNING: Brush/Roll Application - TotalBoat Special Brushing Thinner 100.
Check Stock

TotalBoat TotalBilge Epoxy Based Bilge Paint for Boat Bilges, Bulkheads, Engine Rooms and Locker Areas, White, 1 Quart (Pack of 1)

  • prime prepared metals with TotalBoat TotalProtect.
  • for fiberglass prime with TotalProtect if desired.
  • for wood use TotalBoat Topside Primer if desired.
  • EASY TO KEEP CLEAN: Remove grease, oil, and grime from the high-gloss finish using a cleaner/degreaser. TotalBilge won't lift, crack, peel, or stain.
  • CHOOSE COLOR AND SIZE: Available in White and Gray colors, in Quart and Gallon Sizes. COVERAGE: 250-300 sq ft/gal.
  • THINNING: Brush/Roll Application - TotalBoat Special Brushing Thinner 100.
Check Stock

TotalBoat TotalBilge Epoxy Based Bilge Paint for Boat Bilges Bulkheads Engine Rooms and Locker Areas Gray Quart

  • TOUGH, WATERPROOF BILGE PAINT: This marine paint resists chemicals, oils, acids, alkyds and solvents. Hard, durable epoxy coating is ideal for boat....
  • CHOOSE LIGHT GRAY OR WHITE: Paint boat bilge areas to protect and brighten so you can find & fix leaks and other problems before they become costly....
  • EASY TO USE: Apply 1-2 coats by brushing, rolling or spraying on prepared fiberglass, wood and metal.
  • EASY TO KEEP CLEAN: Remove grease, oil, and grime from the high-gloss finish using a cleaner/degreaser. TotalBilge won't lift, crack, peel, or stain.
  • CHOOSE COLOR AND SIZE: Available in White and Gray colors, in Quart and Gallon Sizes. COVERAGE: 250-300 sq ft/gal.
Check Stock

Sailortenx Manual Bilge Pump For Boats Kayak Bilge Pump Hand Kayak Water Pump Manual For Boats Bilge Pump Manual Portable Floating Hand Bilge Pump For Kayak Etc

  • [Sturdy Durable] Manual kayak bilge pump is made of plastic, compact and lightweight, very easy to carry. The portable bilge pump Kayak manual is used to evacuate water from inside your kayak or hatch to prevent capsizing or swamping..
  • [Emergency Tool] Just connect the manual marine bilge pump for boats hose to either end of the kayak water pump, so manual bilge pumps kayaks with one end deep in the bilge and ejecting this bilge water overboard..
  • [How To use] Insert the bottom of the boat bilge pump for kayak (or hose) into the water, and use the handle to start pumping. The kayak bilge hand pump sucks water in when you pull the handle out, and disperses the water when you push the handle in..
  • [Ergonomic Design] The ergonomically designed handle is very easy to grip, boat bilge pumps manual is gear shape desingn and features a filtered nozzle to prevent seaweed, leaves and debris from clogging the manual hand bilge pump for boat..
  • [Scene To Be Used] Manual kayaks hand bilge pumps for boating perfect for emergency water removal in small boats, kayaks, canoes or dinghies..
Check Stock

TotalBoat-488366 TotalBilge Epoxy Based Bilge Paint for Boat Bilges Bulkheads Engine Rooms and Locker Areas White Gallon

  • TOUGH, WATERPROOF BILGE PAINT: This marine paint resists chemicals, oils, acids, alkyds and solvents. Hard, durable epoxy coating is ideal for boat....
  • CHOOSE LIGHT GRAY OR WHITE: Paint boat bilge areas to protect and brighten so you can find & fix leaks and other problems before they become costly....
  • EASY TO USE: Apply 1-2 coats by brushing, rolling or spraying on prepared fiberglass, wood and metal.
  • EASY TO KEEP CLEAN: Remove grease, oil, and grime from the high-gloss finish using a cleaner/degreaser. TotalBilge won't lift, crack, peel, or stain.
  • CHOOSE COLOR AND SIZE: Available in White and Gray colors, in Quart and Gallon Sizes. COVERAGE: 250-300 sq ft/gal.
Check Stock

Attwood 4608-7 Tsunami T800 Bilge Pump, 800 GPH, 12-Volt, Barbed ¾-Inch Diameter Outlet, 29-Inch Wire

  • What you will get: the package contains 1 piece of 12 V boat bilge water pump and 1 piece of automatic boat bilge pump float switch, nice combination for you to drain the water easily.
  • Basic parameters: the flow of the pump is 1100 gallons per hour, the flow rate is 1100 GPH, the voltage is 12 V DC, and the head is 13 ft (4mts).
  • Outlet diameter: 1-1/8 inch/ 29 mm, cable length: 3.3 ft/ 1 m.
  • The float switch's max amps 12 volts: 20 A.
  • The wire length is 3.3 ft/ 1 m, the wire gauge size is 18 AWG.
  • Electric bilge pump: the electric bilge pump is great for you to drain water efficiently, which has a good motor and help drain the water efficiently.
  • It is a good forhydraulic systems fed with cold water and can be applied in line to be fed by gravity or pressure.
  • Automatic boat bilge pump float switch: the float swith is automatic, it will turn the boat bilge pump on when water level reaches 2 inch (51 mm), and it will turn the pump off when water level reaches 0.7 inch (19 mm).
  • It is good flow sensor for bilge pumps, and it features with a removable base for easy cleaning.
  • Wide range of application: the boat bilge pump and automatic float switch can be applied for fishing boats, cruisers, runabouts, yachts and mo....
Check Stock

Shoreline Marine Bilge Pump Plumbing Kit | Plastic Bilge Pump Hose | 2 Stainless Steel Hose Clamps | Easy Installation | Heavy-Duty Marine Accessory

  • BILGE PUMPS & PLUMBING: The kit is among the functional boat accessories that allow you to remove the accumulated water from the bilge. This kit consists of a plastic bilge pump hose, thru-hull fitting, and 2 stainless-steel hose clamps..
  • HIGH COMPATIBILITY: Irrespective of the size of the boat, this high utility water pump works in accordance with 3/4" x 5" of the plastic bilge hose. This kit contains everything you need for bilge pump installation..
  • EASY TO USE: With a pack of all the essential parts and equipment required to perform the pumping task, this kit makes it one of the best marine boat accessories. It is fast and easy to use..
  • DIMENSIONS: The kit consists of 3/4 inches and 5 inches of plastic bilge pump hose, along with a thru-hull fitting and 2 stainless-steel hose clamps that work efficiently to remove the excess water from the hull. It works wonders with a bilge pump float switch..
  • CALCUTTA OUTDOORS: A leading manufacturer of consumer products for the outdoor sports and recreation market providing performance-driven products, including fishing rods, ta....
Check Stock

Johnson Pumps - 22102 PROLINE Bilge Pump 1000 GPH 2.5A

  • No one wants to worry that their boat is slowly taking on water because the bilge pump has failed. Well, you can sleep soundly with the reliable 2000 bilge pump on the job.Small size, high efficiency, low current (low cost switching power supply supporting).
  • to achieve a small size perfect combination of high flow..
  • It is non-automatic and must be paired with a float switch or sensor and ON/OFF/AUTO switch. Unique automatic "discharge" function can bear the long-term continuous operation under nearly congestion condition Impact resistant ABS housing.
  • Used in a boat,you can also use it in solar powered waterfall for your backyard, in a battery back-up sump system,etc. It empties the bilge roughly 25% faster than 1500gph bilge pump,and will continue to pump even when it encounters some minor debris.
  • Heavy duty motors with stainless steel shafts and tough. thermoplastic bodies submersible bilge pumps are tough enough for any bilge.Tough, efficient, long life motor.Offer high capacity output Water cooled long-life motors.
  • Ignition protection Water/moisture tight seals.
  • Snap lock strainer base for easy installation and removal.
Check Stock

Ogrmar Automatic Boat Bilge Pump Float Switch Moisture Tight Seals 12/24/32VDC Ignition Protected Mercury

  • Compact efficient long life motors: Small volumn and portable bilge pump is made of long life motors .It can Improve work efficiency.
  • Exclusive Moisture Ting Seals: Bilge pump is made from heavy duty marine sealant and corrosion material Protection.
  • Cleanable Strainer: The pump base is used by high qulity easy clean snap lock strainers. the life-span of the bilge pump could be prolonged..
  • Easy to Install: Design common installation location and it can use with the bilge switch.
  • Wide Application : Bilge pump can be used in aquarium,fishing boats,fountain and other places to easily drain the water.
Check Stock

Acouto Bilge Air Blower 12V 4inch 270CFM in‑Line Marine Bilge Air Blower 4\ DC Electric Fan Boat Accessory 12VDC White

  • 12V Bilge Air Blower---- This bilge air blower 12v is suitable for 4in diameter hose and provides ventilation for engine compartments, galleys, bilges and heads. 100% brand new, please be assured of your purchase.
  • High Efficiency---- Six‑blade fan maximizes airflow and efficiency, more reliable and practical. Very low current draw, high volume air flow, and long service life. Flow: 270 CFM.
  • Stable Performance---- Sealed motor shaft for moisture protection, to have better performance. Corrosion proof design and water resistant motor casing for use in the marine environment.
  • High Quality ABS---- 4" Marine Bilge Air Blower has white ABS plastic construction, wear-resistant and reliable in use. The manufacture of the 4" in-line marine bilge air blower meets the strict quality requirements.
  • Easy to Install---- The 4" in-line marine bilge air blower has built-in mounting feet for vertical or horizontal installation. Ideal and direct replacement for old or damaged bilge air blower, dependable to use.
Check Stock

Five Oceans Bilge Pump Three-Way Rocker Control Panel Switch with Circuit Breaker, Black, Automatic-Manual-OFF functions, LED light indicator, FO-3851

  • With this Three Way Bilge Pump Switch, you do not have to change a fuse. In case of having a short circuit, just press the button of the circuit breaker to restore the circuit.
  • PROVIDE remote control of automatic bilge pumps or bilge pumps with float switches.
  • 3-WAY Stylish Rocker Switch has Auto, OFF and Manual positions. Power indicator light confirms system power.
  • MANUAL position has spring back feature to prevent bilge pump from continuously running.
  • COMPATIBLE with bilge pumps that draw up to 10A - 12/24VDC. FIVE OCEANS, 40 YEARS developing High-Quality Marine & Outdoor Products.
Check Stock

AMRM-4505-7 Attwood Sahara Automatic Bilge Pump - 500 GPH

  • The Attwood Sahara Bilge Pump is a durable, compact, and easy to install automatic bilge pump. The Sahara has everything contained in one compact yet durable package, making this pump a great option for tight spaces. This series of bilge pump features a 316 stainless steel motor shaft for corrosion resistance and a durable high-impact, glass-filled polyester impeller. The base of the pump has quick, one-handed removal for easy disassembly for cleaning..
  • Pumps include 36" lengths of 16-gauge caulked and tinned copper wire. An automatic-switch bilge pump is a requirement for any vessels 20’ especially those that accommodate overnight passengers and crew. All Attwood bilge pumps come with a 3 year manufacturer's warranty..
  • Mercury-free switch. Test knob for easy operational check Non-restrictive float movement. Larger filter area resists clogging.
  • Free flow of water around housing keeps motor cool. 316 Stainless Steel motor shaft for saltwater corrosion resistance. Durable high-impact, glass-filled polyester impeller.
  • Sahara S500 Part #: AMRA-4505-7, GPH at Open Flow: 500, GPH at 3.3' Head: 350, Hose Size: 3/4" I.D..
Check Stock

Fiberglass Boat Hull Cleaner for Boats & Aluminum Boat Cleaner Cleaning Supplies Marine Metal Stain Remover and Restorer Boat Soap Wash Pro Products Clean Deck Pontoon & Sailboat 32oz

  • REMOVES TOUGH STAINS INSTANTLY: Our instant boat hull cleaner effortlessly cuts through buildup on the hull, aluminum pontoons and boat bottom including waterlines, rust, black steak, lime deposits, salt, gas exhaust, grease, grime and hard water..
  • SAFE ON MANY SURFACES: Our fiberglass boat hull cleaner for boats is also safe for an aluminum hull, gelcoat, metal and painted surfaces - unlike other fiberglass cleaners or gel coat boat wash. Turn yellowed boat surfaces bright white instantly!.
  • FAST RESULTS: Our pro boat stain cleaner quickly and easily removes tough new and old stains and heavy build up in minutes, making boat hull cleaning a breeze. Watch as the stains melt off your boat, sailboat, bilge, deck or even vinyl siding..
  • EASY APPLICATION: This versatile marine grade boat cleaner can be applied using a sponge or sprayer. Simply apply the hull boat clean solution & restorer on your stained area, allow to sit for 2 minutes, and rinse off to see your clean restoration..
  • WHY BETTER BOAT: We're a family owned American business committed to making premium quality boat cleaning supplies & boat cleaner products and kit. We stand behind your satisfaction and our sealant, seat cleaner, protectant hull & boat soap..
Check Stock