Top Bi Metal Hole Saw Reviews

4 inch Deep Hole Saw Carbide, 2.36” Cutting Depth for Multiple Material Hardy Plank MDF Wall Tile 10X More cuts 5X More Faster

  • 1, The Carbide Tipped Teeth hardness HRC overs 80. It’s more hard, more shape, longer life. Up to 10X times more Cuts than standard bi-metal hole saw drilling for Hardy plank. Up to 5X times more Speed than standard bi-metal hole saw drilling for Hardy plank..
  • 2, The big slot design is to remove the plug easily. Up to 5 times Faster than standard hole saw..
  • 3, Max cutting depth:2.36 “( 60mm) . Replaced the following drill bits: Spade bit, Forstner bit, Auger bit, bi-metal hole saw..
  • 4, Ideal drilling for multiple materials: Hardy Plank, Hard wood（not with nail), Drywall, MDF, Fiberglass, Wall Tile, Air Brick, Plasterboard. Cutting material MOHS hardness ：Not up to 6 . For use in standard rotary drills. Not for use in Hammer mode..
  • 5，This carbide hole saw cutter includes: 4”(102mm) carbide tipped hole saw , 1 of 0.34”(8.6mm) hex shank arbor, 1 of Ø1/4”x4.3”(110mm) silver HSS pilot drill bit for wood. 1 of Ø1/4”x4.3”(110mm) carbide tipped pilot drill bit for hardy plank, stone, wood..
Check Stock

6 1/8 Inch HSS BI-Metal Hole Saw 1 3/16 inch Cutting Depth Hole Cutter with Hex Shank Drill Bit Adapter for Wood Cornhole Boards Plastic Drywall Fiberboard Can Light Recessed Light Blue

  • WIDE APPLICATION: Our Bi metal Hole saw is perfect for cutting wood,plywood, plastic, drywall, soft plaster,acrylic-board and thin metal. In addition....
  • PROFESSIONAL MATERIAL: The 6 inch hole saw is made of HSS carbon steel & Bi-metal steel, which has superior performance and higher cutting strength....
  • SMOOTH CUTTING: he high-quality bi-metal blade and variable pitch sharp HSS teeth combine with Non-binding clean edge design ensures smooth and clean....
  • EXCELLENT WORKMANSHIP: This powerful hole cutter is made of M42 high-speed steel and bi-metal, with higher hardness (≥65HRC), higher toughness,....
  • CUSTOMER SERVICE: We are dedicated to providing every customer with satisfying products and services. If you are not satisfied with our hole saw, we....
Check Stock

KATA 6-Pack 2 Inch 50mm Desk Grommet Wire Cord Cable Hole Cover with M42 2 Bi-Metal Hole Saw Kit and 2M Cable Sleeve Organizer Cord Wire Wrap Coiled Tube Sleeve Management

  • 【INCLUDES】1PC 51mm (2") M42 Bi-Metal Hole Saw Blade,38mm Depth.
  • 【PREMIUM MATERIAL】The Hole Saw is made of M42 Bi-Metal high speed hacksaw blade,high wear resistance, sharp cutting head, efficient and accurate....
  • 【SIMPLE BUT USEFUL】Installation is simple and convenient:Drill a hole on the desktop with the hole saw blade and the mandrel arbor,then put the....
  • 【KEEP CLEAN AND TIDY】The desk grommets and cable sleeve can effectively manage cables and wires,keep the desktop clean and tidy..
  • 【APPLICATION】The M42 bi-metal hole saw is ideal for hand electric drill, bench drill, etc.Can cut holes easily on wood, iron plate, hard plastic,....
Check Stock

HYCHIKA 6 inch 152mm Hole Saw 1 1/2 inch Cutting Depth HSS Bi-Metal Hole Cutter for Wood Cornhole Boards Plastic Drywall Fiberboard

  • 【HIGH QUALITY MATERIAL】The 6inch hole saw is made of bi-metal with the cutting part made of high hardness carbide steel (69-81HRC), 2mm thick,....
  • 【PRECISE AND CLEAN CUTTIN】Non-binding clean edge design and duplex teeth guarantee a cleaner and smoother cutting with higher precision. The chip....
  • 【HIGH HARDNESS】Comes with a heavy duty 1/2" unique hex shank mandrel, fits 1/2" or 3/8’’ drills. Cutting depth: 40mm. Our hole saw features a....
  • 【WIDE APPLICATIONS】Ideal for hole cutting on soft metal, wood, PVC board, plastic, gypsum board, perfect for home projects like corn hole board....
  • 【WHAT YOU GET】1 x HYCHIKA 6’’ Bi-Metal Hole Saw Blade, 1 x 1/2-inch Hole Saw Mandrel, 2 x Drill Bits, 1 x Hex Key, 1 x User Manual..
Check Stock

WoWSupM 6-3/8 ,4-3/8 inch Recessed Light Installation kit Carbide Grit Hole Saw Cutting Drywall, Ceilin Tile　for 6” ,4”Lights

  • 【Package】The Carbide grit hole saw Installation light kit includes:1pcs of 4-3/8”, 1pcs of 6-3/8" carbide drill bits(Black or Red), 1pcs of 0.43” hex shank arbor, 2pcs of Ø0.25”x 3.5" HSS pilot drill bits..
  • [Application] This Carbide grit installation light hole saw kit is For 4”, 6” recessed light, Cutting Drywall, Plaster, Ceiling ,Corn Hole Board, Acoustical Tile. Cutting depth: Up to 1” ..
  • [Advantage 1] The carbide grit teeth hardness over 80HRC.It is more sharp ,hard. It’s a longer life in abrasive material..
  • [Advantage 2] The specially back removes the plug easily. It’s faster than bi-metal hole saw 2 times..
  • [Advantage 3] The specially sharp teeth cuts more smooth,clean . It is more faster than tradition carbide grit hole saw up to 30%. It is more faster than tradition bi-metal hole saw up to 50%..
Check Stock

PLG2SUPT Recessed Light Hole Saw Kit 6-3/8,5-3/8,4-3/8,3-1/8 Inch Carbide Grit for 6”,5”,4”,3” Light Cutting Drywall, Ceiling Tile

  • This recessed light Carbide grit hole saw cutter Install kit includes: 3-1/8”(79mm), 4-3/8”(111mm), 5-3/8”(137mm), 6-3/8"(162mm) hole saw bit, 1 of 0.43”(11mm) hex shank large arbor, 2 of 3.5" (89mm) pilot HSS drill bits.
  • The carbide grit edge hardness over 70HRC.It is more hard, sharp . It’s a longer life in abrasive material..
  • The specially designing edge cuts more clean ,smooth . It is more fast than tradition bi-metal hole saw up to 80%. The specially designing back removes the plug easily. It’s fast than bi-metal hole saw 2 times..
  • The hole saw teeth is specially designing. It’s more sharp and more fast than tradition one. 4 pack hole saws are good match. It’s for professional choice..
Check Stock

4-1/2 Inch Hole Saw with Heavy Duty Arbor,HSS Bi-Metal Holesaw Drill Bits Cut Smooth and Fast in Wood,Plastic Drywall Thin Metal 4.5” Hole Cutter for Drilling Holes for Lock Knobs and Vent Black

  • HIGH PERFORMANCE METIERAL: The Eliseo 4-1/2-inch hole saw made of M42 High Speed Steel and BI-Metal, with higher hardness(≥64HRC), higher toughness....
  • EFFICIENT AND SMOOTH CUTTING---High-quality bi-metal band and the best cutting performance of HSS teeth combines with Non-binding clean edge design....
  • WIDE APPLICATION---The Hole saw cuts 4.5 inch diameter holes through wood, plywood, plastic, drywall, soft plaster, acrylic-board and thin metal.
  • QUICK CHANGE MANDREL---The hole saw comes with a heavy duty 7/16” hex shank quick change mandrel, fits all 1/2" chuck drills, ideal for your....
  • DIMENSIONS---Cutting Holes Diameter: 4-1/2” (114mm).
  • Package comes with 1PCS 4.5inch hole saw, 1PCS 7/16inch hole....
Check Stock

Recessed Light 6-3/8 Inch Carbide Hole Saw Cutter with Extra Gift for 6” Light Cutting Drywall, Ceiling Tile, PLG2SUPT

  • This recessed light Carbide grit hole saw cutter Install kit includes: 1 of 6-3/8" 162mm hole saw bit(Black or Red), 1 of 0.43”(11mm) hex shank arbor, 2 of 3.5"(89mm) pilot HSS drill bits. Extra 8 of 1” CrV Screwdriver bits,1 of Magnetic bit holder, 1 of 3M tape measure..
  • This recessed light carbide grit hole saw bit kit is your ideal choice For 6” recessed light with electric tool, cutting through abrasive materials, Wood, Drywall, Wood & Plaster, Corn Hole Board, Hardie Board, Acoustical Tile, Ceiling Tile . Max cutting depth: 1” (25mm)..
  • The carbide grit hardness over 70HRC.It is more hard, sharp . It’s a longer life in abrasive material..
  • The specially designing edge cuts more clean ,smooth . It is more fast than tradition bi-metal hole saw up to 80%. The specially designing back removes the plug easily. It’s fast than bi-metal hole saw 2 times..
  • Can not cut the wood with nail. Be Careful: Look for Hidden electrical circuits before your drilling..
Check Stock

KHCRAFT Bi-Metal Hole Saw Kit High Speed Steel M42 with Cobalt 8% for Metal and Wood 13-Piece General Purpose 3/4

  • Professional high speed steel M42 (not M3) with cobalt 8% cutting teeth hardened to control the efficient and durable and reliable use on workpieces like sheet metal, Aluminium, wood, plastic, plasterboard, etc.. HSS M42 teeth is particularly good for high strength metal such as stainless steel (HSS M3 ones are good for middle strength metal but not high strength one) because HSS M42 contains cobalt 8%, which raises the hardness of the teeth. HSS M42 is about 20% more durable than HSS M3..
  • 9-piece hole saws: 3/4"(19mm), 7/8"(22mm), 1-1/8"(29mm), 1-3/8"(35mm), 1-1/2"(38mm), 1-3/4"(44mm), 2"(51mm), 2-1/4"(57mm), 2-1/2"(64mm).
  • 4-piece accessories: arbor 9/16"-1-3/16" with shank 3/8".
  • arbor center drill with shank 1/4". Center drills in this kit are all made of real HSS M2 and fully ground, while a lot of bi-metal hole saw kits are with low grade HSS center drills roll-forged..
  • with max cutting depth 1-3/8" (35mm) and ideal for drilling on sheet metal (even high strength metal because of HSS M42 with cobalt 8% teeth), wood, plastic, plasterboard, Aluminium, etc.. Particularly for sheet metal: the cutting depth is 2mm to 5mm, depends on the hardness of the metal and taking hand drill ....
Check Stock

Ryker Hole Saw Kit with Arbors and Replacement Drill Bits, Heavy Duty Steel Construction for Boring Wood, Aluminum, Metal, or PVC, Plumbing and DIY Carpentry (Bi Metal - Metal Hole Saw Kit)

  • General Purpose Bi-Metal Hole Saw Set This professional-grade hole saw kit for construction, woodworking, plumbing, and DIY carpentry includes versatile tools for drilling or boring holes including 7 hole saws, arbors, and replacement drill bits..
  • Ultra-Sharp Steel Teeth Our metal hole saws are designed with strong, precision cobalt steel to withstand heavy-duty use on metal, wood, PVC pipes, drywall, plywood, sheet metal, aluminum, plastic, pipes, and other non-ferrous materials..
  • Optimized Hole Saw Cutting Sizes Not every job needs the same size hole which means you need a quick solution to get the job done right the first time. We included 25/32, 1, 1 , 1 9/16, 1 , 2 3/8, and 2 11/16 saws in every tool kit..
  • Low RPM to High-Torque Reliability We use long-lasting cobalt steel in our hole saws to ensure smoother drilling and boring on almost any surface. That makes them ideal for plumbers working with a variety of different metals and materials..
  • Compact, Protective Storage Case Every Ryker Hardware bi-metal hole saw set comes with a rugged storage case to help keep your tools neatly organized and protect them from weather and dirt on the jobsite. A smart choice for home or construction use..
Check Stock

KEILEOHO 2 Inch 51 MM Black Hole Saw with Heavy Duty Arbor, Drill Bit and Hex Wrench for Cornhole Boards, Plywood, Iron Board, Acrylic, Ducts, Ceiling Lights, Cinder Wall

  • PREMIUM METAL MATERIAL - The hole saw is made of high quality and environment friendly carbon steel, which is rust-proof and wear-resistant with long service life. It is a good helper for woodworkers and welders..
  • COMPLETE HOLE SAW KIT - This is a complete hole saw kit that includes everything you need for cutting of corhole boards, drywall, acrylic-board, thin metals, etc. A set of hole saw kit includes 1pcs HSS Bi-Metal hole saw, 3pcs hex shank drill bit adapter and 1pcs M4 Hex wrench..
  • WIDE APPLICATION - Upgraded with ultra sharp blades for faster and cleaner cutting, which is ideal for opening holes on softwood, plastic plate, plasterboard, metal board, acrylic board, and thin PVC board. Perfect for installing locks, knobs in doors and cabinets or drilling larger, diameter holes through desks or bench, air ducts, ceiling lights, speakers and more..
  • IMPROVE WORK EFFICIENCY - Our hole saws have BI-metal strips and sharp teeth. It can drill holes quickly. Using it can reduce the working time and your work burden. Hole saws can be applied to drill holes in cornhole boards, plywood, iron board, acrylic, ducts, ceiling lights, cinder wall and more..
  • NO-RISK PURCHASE - From workmanship to function to anything else, we want you to be TOTALLY HAPPY–Should y....
Check Stock

ASNOMY 12Pcs M42 HSS Bi-Metal Hole Saw Set, 11/16 inches - 3 inches Large Size Hole Opener Hole Saw Cutter Tool for Drilling Cornhole Board, Plastic, Pipe, Wood, Fiberboard, Soft Metal

  • 12PCS Bi-Metal Hole Saw Kit: Include 11/16″(18mm) , 13/16″(20mm), 15/16"(24mm), 1-1/8"(28mm), 1-3/16"(30mm), 1-3/8"(35mm), 1-1/2"(38mm), 1-3/4"(45mm), 2"(50mm),2-3/16"(55mm),2-9/16"(65mm), 3"(75)mm,a variety of sizes can meet your different needs,the cutting depth is 1-3/16"(30mm). Each hole saw has a arbor with drill bit..
  • Top Quality: This Hole saw set made from M42 HSS and Bi-Metal,make it have higher hardness (≥64HRC) and higher toughness than standard hole saw, better cutting performance, so that it can cut ceiling tiles and gypsum board smoothly.
  • Cutting is more efficient and clean: The hole cutter made of heavy-duty bimetal and unique sharp HSS has sharper teeth, and has four chip evacuation holes, which has more powerful chip evacuation capability. Make it possible to quickly remove the cutting material, and the cutting edge is smoother.
  • Wide Application: This 4 hole Saw blade perfect for drilling metal sheet, drywall, plastic pipe, wood, PVC, fiberboard, grommet hole, recessed light and can light hole Drilling..
  • Satisfaction: ASNOMY aims to provide high-grade products and customer service to all customers. Any problems, just contact us and our after-sale team will solve your problems ASAP..
Check Stock

MIKMAYTOO 1 Inch Carbide Hole Cutter, 25.4mm Hole Saw Metal, 1 inch Drill Hole Cutter for Thick Metal, Stainless Steel, Iron Pipes and Hard Material, Shank 3/8 inch Depth 1 inch

  • 【 Extremely Long Life 】25.4mm tungsten carbide hole saw is Industrial grade hole cutter, extremely durability for any tough material with over 10x times longer life than bi-metal and HSS hole cutters..
  • 【 Fast & Precise Cuts 】1 hole saw metal drill bit is carbide technology and optimized tooth geometry make hole saws provide superior lifetime and fast cutting in the most demanding applications..
  • 【 Applications 】1 carbide metal hole saw bit for metal provide fast and precise cuts into 3/4-inch thickness material such as : stainless steel, mild steel, alloy steel, aluminum, FRP, and plastic..
  • 【 Perfect Cutting Surface 】1 inch metal drill bit can precisely cut very high quality and smooth holes due to the excellent control of the concentricity rate..
  • 【 Double the cutting depth than other products 】1 inch metal hole saw bit cutting depth : 1 inch(25mm) ,but the other cutting depth is only 1/2 inch, so MIKMAYTOO hole saw bit for metal almost meets all metal material hole cutting..
Check Stock