Top Benz 38 Pin Breakout Reviews

Creator OBD2 Scanner for Mercedes Benz ABS SRS Transmission Full System Diagnostic Scan Tool Professional Automotive Code Reader - Creator C502 [2022 Version]

  • 【Full system diagnosis for Mercedes-Benz】Works on most Mercedes-Benz A, B, C, E, S, CLS Class and other models produced between 2001 and 2018. Support code retrieval, clearing and real-time live data of all systems, including Drive, Chassis, Body, AirBag, Seats and doors, E-call, Driver assistance system, ABS and so on..
  • 【Purchase Notes】NOTE: Some models manufactured before 2000 may use a 38-pin diagnostic connector. For these cars, the 502 does not work with them. If you are uneasy about the scope of application, please tell us your vehicle model and production year (if you have VIN, it is better).
  • 【Oil Light Reset】When you replace or service your oil, or replace the oil pump or oil sensor, you may need to reset oil light. Creator 502 can reset the oil lamp on the dashboard after your service is completed. Note: Only applicable to Benz cars.
  • 【Universal OBD2 Scanner】Also supports full OBD-II service for other car make, such as read/erase code, live data, freeze frame, Mode 6, I/M Readiness, VIN info and so on. It can diagnose Emission-Related Diagnostic Trouble Codes and check engine light. It works on most vehicles with OBD-II diagnostic interface and is applicable to all OBD-II protocols (KWP2000, ISO9141, J1850 VPW, J1850 PWM, and CAN....
Check Stock

UMLIFE 5pcs NRF24L01+PA+LNA RF Transceiver Module with SMA Antenna 2.4 GHz 1100m + 5pcs NRF24L01 Wireless Module with Breakout Adapter On-Board 3.3V Regulator for Arduino

  • It can be wildly used to wireless remote control, somatosensory devices, RFID, NFC, smart grid, smart home, wireless audio etc..
  • 5PCS NRF24L01 8 Pin Socket Breakout Adapter Board: On-board AMS1117-3.3 chip, a simple socket breakout board which is for 8-Pin NRF24L01 wireless module.
  • 5PCS NRF24L01+PA+LNA RF Transceiver Module with SMA Antenna: Built-in 2.4Ghz antenna: available software to set the address, only received local address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers.
  • RF24L01+ Breakout Adapter: Small power on SMD LED indicator, On-board 3.3V voltage regulator, which accepts +5V power supply input and provides 3.3V for the attached "nRF24L01+" module..
  • The packing list includes: 5 * NRF24L01+PA+LNA Wireless Transceiver RF Transceiver Module.
Check Stock

uxcell 38 Pin to 16 Pin OBDII OBD2 Diagnostic Adapter Connector Cable Tool for Reading Diagnostics Info from Scanner for Mercedes-Benz

  • [Fitment] For Mercedes-Benz 38 Pin male to 16 Pin OBD2 female connector..
  • [Function] The function of the cable is connected to OBD diagnostic scanner, it can read real time engine data, such as speed, RPM, temperature, O2 sensor data, emissions, voltage, etc. That is convenient for your car driving..
  • [Feature] This is a brand new data link cable, used specifically for connecting your OBD2 scanner. Attention: this item is just an adapter, not a scanner..
  • [Easy installation] Durable and waterproof, convenient to use, plug and play..
  • [Durable Material] The cable adapter is made of plastic and metal, corrosion resistant, heat resistant and long service life..
Check Stock

OBD-II Breakout Diagnostic Box, OBD2 Pinout Tester Detector

  • The OBD-II breakout box with male and female header connectors, so that this breakout box can be placed between the vehicle and the diagnosis tool. Very handy if you want to measure CAN bus signals..
  • To provide quick access to all 16 pin connections during repair and diagnosis of the vehicle..
  • OBD-II breakout header cable length 420mm/16", to facilitate plugging in equipment..
  • Standard 4mm banana sockets. The five color sockets correspond to different pinouts, which is convenient for you to identify pinouts with different functions..
Check Stock

GeeekPi Raspberry Pi Pico Breakout HAT Board, Raspberry Pi GPIO Expansion Board Breakout HAT Module for Raspberry Pi Pico, Support Raspberry Pi HAT Board with 40Pin Pin Header

  • Application: This breakout HAT board, which is specially customized for Raspberry Pi Pico..
  • Convenient: Solve the problem that the Raspberry Pi Pico silk screen is covered, and providing pin header pins, which is convenient for users to build their own DIY circuits..
  • Features: Support Raspberry Pi HAT board with 40Pin Pin Header.
  • For example: GeeekPi DockerPi series HAT board, 4-channel relay HAT board, SensorHub board, etc. It Provides a good bearing platform.
  • Package Includes: 1 x Breakout HAT Board For Raspberry Pi Pico.
Check Stock

S-Union [8PCS] New 16AWG 6Pin PCI-E to 8 6+2 pin Cable 27.5 Inch 70CM Length PCI 6Pin Male to Male Cable for GPU/PSU Breakout Board GPU Ethereum ETH Mining Power Supply with 5 Nylon Cable Ties

  • 【Item】PCI-E 6Pin to 8 (6+2) pin Male to Male Cable.
  • 【Safety】This item is 16 AWG wire，Able to withstand greater current and high power appliances.
  • 【Feature】The line is 27.5 inch (70CM) long, easy to use and connect.
  • 【Compatibility】This item is Compatible with Graphics Video Card, GPU breakout board,GPU Mining Power Supply, for GPU breakout board Search:....
  • 【What You Get And Shipping】8 x PCIe 6Pin to 6+2 Pin Male to Male Cable & 5x Nylon Cable Ties. SHIPPED FROM THE U.S. Delivery time takes about 2-5....
Check Stock

DORHEA 5Pcs ESP32 Development Board GPIO Breakout Board 30Pin Type-C Micro USB Dual Interface ESP32 Shield 30P Ultra-Low Power Dual Core ESP32-DevKitC-32 ESP-WROOM-32 ESP-32 ESP-32S Expansion Board

  • ESP32 shield 30P expansion board, supports two power supply : DC 6.5-16v and USB 5V.
  • The GVS output power supply can be 5V or 3.3V, which is more convenient to match the external 5V electronic module sensor..
  • The breakout board is only fit for 30PIN ESP32. Please confirm your esp32 board pins width is coincide with the pin width of the breakout board.
  • ESP32 breakout board GPIO 1 into 2 only can compatible with 30 pins ESP32S ESP32 , just for ref asin: B086MJGFVV B086MLNH7N B086MGH7JV.
  • This module is safe, reliable, and scalable to a variety of applications. Stable and highly reliable.Great contact and stable signal transmission for your esp32 board.
Check Stock

Programming The Raspberry Pi Pico In C

  • Compatible with Raspberry Pi Model 4/3B/Zero 1.3/2B/B+/A+ GPIO.
  • Use your RPi 4/3/Zero/2/B+/A+ with prototypes consisting of a 40-pin breakout.
  • 8"(20cm) cable length, dark grey color, NELTRON cable.
Check Stock

Treedix Prototype Breakout Breadboard Adapter Expansion Board for BBC Micro:bit

  • This is a connector that fits directly to the edge contacts of a BBC micro:bit. The connector has 80 pins, but because of the different widths of the micro:bit edge contacts, some of the micro:bit contacts will map to more than one of this connector's pins. Also, the back half of the pins are not used at all..
  • The edge connector gives access to all the important pins on the bottom edge of the micro:bit. Check the datasheet for the pin spacing and orientation. This connector is best used with a custom PCB..
  • This breakout board for edge connectors allows intermediate and advanced users to connect micro:bit to breadboards and other sensors, motors, LEDs, etc..
  • We can use it in many ways, it is highly recommended to use our breakout board.
  • Through the breakout board, we broke through all 21 GPIO, power and ground pins in the form of 0.1"..
Check Stock

3-Pack ESP8266 Development Board, Aideepen ESP8266 Breakout Board GPIO 1 into 2 for ESP8266 ESP-12E NODEMCU V2

  • 【ESP8266 ESP-12E】This esp8266 breakout board can fully compatible with ESP8266 ESP-12E..
  • 【Expansion Board】This expansion board can expand one GPIO pin of ESP8266 development board to two, which is convenient for users to reuse all pins in smart home projects. Nice breadboard alternative..
  • 【Ease to Use】Needn't welding components.These boards fit your ESP8266 ESP-12E perfectly,can be inserted into the sockets with minor effort by hand..
  • 【Good quality】This ESP8266 Breakout Board is design with double-layer that One pin is wired on both sides. Great contact and stable signal transmission to your ESP8266 board..
  • 【Why choose us】Aideepen specializes in various electronic components,We have always cared about the customer experience and improve the product function details,please feel free to contact us..
Check Stock

Autel MaxiSys MSOBD2KIT Non-OBDII 11 Multi-brand Adapters Kit for Diagnostics on Old Cars Made in 1996 to 2002 without OBD2 Port, Work with Autel MaxiSys Ultra, MS919, MS909, Elite II, MX808, MK808

  • 【11 Adapters Kit】 Unlike other brand’s kit which only packs 9 or even fewer non-obd2 adapters, Autel MSOBD2KIT thoughtfully puts the complete 11 multi-brand adapters into the package for professional use: Nissan-14, VW/Audi-2+2, Chrysler-16, Mitsubishi/Hyundai 12+16, Mazda-17, Benz-14, Kia-20, Fiat-3, BMW-20, Benz-38, and PSA-2..
  • 【User Oriented】 1) OE-compliant with multi car brands.
  • designed for available diagnostics on specific vehicles made in 1996-2002 without the standard OBD2 pin configuration.
  • 2) made from rigid reinforced plastic for daily busy use.
  • 3) the blow-molded carrying case keeps the adapters in place for convenient use..
  • 【Genuine Autel Product】This Non-OBD2 adapter kit is officially-authorized by Autel offering 3-month unconditional return & replacement and 1-year product quality backup. We are here at your service 24/7 for any technical issues..
Check Stock

KONNWEI KW360 Full System OBD2 Diagnostic Scanner for Mercedes Benz Code Reader Automotive Check Engine Light EPB ABS SRS OBDII Scan Tool Oil Throttle Position Adaption Brake Pad Reset Tool

  • EXCLUSIVE FOR Mercedes Benz: except the professional engine system OBD2 functions for all cars, KW360 also supports all systems diagnosis for Mercedes Benz including car engine light, ABS, Transmission, SAS, ESP, TPMS and other systems. Equipped with particular function like reset the oil. The KW360 can work on 16 pin Mercedes-Benz and Smart..
  • WIDE COMPATIBILITY: Accurately read and erase engine error codes on most OBD2 protocol vehicles with a 16 PIN interface (KWP2000, ISO9141, J1850 VPW, J1850 PWM and CAN). (NOTE: Except for Engine system, other systems diagnosis is only compatible with Mercedes-Benz. The compatibility is up to the chassis and system, please confirm before purchase. ).
  • 10 MODES OBD2 SERVICES: KW360 OBDII code reader covers a complete OBDII/EOBD diagnostic function for car engine system. In addition to the basic function of enabling car owners to quickly read and clear DTC (Engine Trouble Code), this automatic code scanner also supports full OBD2 functions to show live data stream, On-Board monitor test(mode 6), EVAP test (mode 8), O2 sensor test and etc..
  • EXCELLENT HARDWARE: KW360 car diagnostic tool has a 2.4-inch TFT LCD display, allows you to easily read the test data. With the silicone keyboard, you can quickly operate the scanne....
Check Stock

MakerSpot Prototyping Board for Raspberry Pi 2 Pi 3 A+ B+ Pi4 v2.2 Soldered with Female Connectors with Pin Header Set in Extra Long & Short Length

  • 348 holes of prototyping area, Full breakout of the 40-pin Pi Header.
  • Holes are connected in row and column groups.
  • Silkscreen marking for 40-pin Pi Header reference.
  • High quality HASL PCB finishing, D0.9mm drill holes and D1.9mm pad size.
  • Pin Headers set: 1 x extra long 40-pin (length: 12mm) stacking header, 1 x short 40-pin (length: 6mm) stacking header.
Check Stock