Top Bending Arc Machine Reviews

165Amps Mig Welder, Dual Voltage Mig Welding Machine, Mig/Stick/MMA/Lift TIG Welder Machine, Gas Gasless Flux Wire Core Welder (MTS-165D)

  • [Multiple welding mode]: MTS165D adopts dual-voltage(110/220V) design, which can automatically read and indicate after power-on. Using IGBT inverter technology, it has high output efficiency, good dynamic performance and good load adaptability. The welding machine is an integrated design welding machine for Stick/MMA/ARC Welding/Lift TIG/2T/4T..
  • [Synergic Function]: One intelligence control system automatic compensate and adjust current/voltage.10 levels precise adjustment from -5V to +5V, Coordinate control mig wire feeder’s speed and current, which makes the machine easy to heat arc and instantaneous Increase the current convenient for striking the arc..
  • [Smooth Arc]: This MIG welding machine can work in conjunction with hot arc and arc forces and achieve smooth arc. Internal pre - set splash less and anti - adhesion, makeing a better arc starting effect. Very friendly for green hand and DIY users..
  • [Automatic Protection Function]: Automatic voltage and current control, built-in energy-saving fan automatically regulates the temperature and prevents overheating and dust enter.VRD against electric shock design makes welding workers safer..
  • [Easy to Use]：Friendly operation interface, front panel detailed identification with precise digital display. Fr....
Check Stock

Amico ARC-160 Professional 160-Amp Stick Arc Lift-TIG Welding Machine 80% Duty Cycle 100-250V Wide Voltage Welder

  • ARC-160 is a professional Stick Arc and Lift-TIG combo welding machine with an industrial level design. It is compatible with all electrodes: E6010,....
  • Automatic selection feature detects input voltage automatically, allowing you to easily switch between 100~250V/50~60Hz input power. Almost all of the....
  • Incorporates advanced IGBT inverter technology with superior arc characteristics and has excellent arc stability. 80% duty cycle at 160 amps ensures....
  • ARC-160 has very powerful functions, making it easy to start and use. The machine has a built-in hot start function, anti-stick function, thrust....
  • ARC-160 Stick Arc with Lift-TIG can achieve the perfect weld. It is a welding machine of the highest level.
  • the strength of its components makes it a....
Check Stock

Amico ARC-200, 5-200 Amp Stick Arc Lift-TIG Combo Welder, 100-250V Wide Voltage Welding, 80% Duty Cycle, Compatible with all Electrodes: E6010 E6011 E6013 E7014 E7018 etc.

  • ARC-200 is a professional Stick Arc and Lift-TIG combo welding machine with an industrial level design. It is compatible with all electrodes: E6010, E6011, E6013, E7014, E7018, etc. The machine has an excellent Lift-TIG arc welding function.
  • 5-200A comfortably welds thin stainless steel and other various metals..
  • Automatic selection feature detects input voltage automatically, allowing you to easily switch between 100~250V/50~60Hz input power. Almost all of the voltages and frequencies can be used. Adjustable arc force settings allow you to meet your custom welding needs..
  • Incorporates advanced IGBT inverter technology with superior arc characteristics and has excellent arc stability. 80% duty cycle at 200 amps ensures long time welding and the machine can still work normally with an extended power cord up to 700 feet. The power cord can resist power fluctuations and cable attenuation at any length..
  • ARC-200 has very powerful functions, making it easy to start and use. The machine has a built-in hot start function, anti-stick function, thrust adjustment function, current-intensity control function, and automatic compensation for voltage fluctuations: over-voltage protection, under-voltage protection, over-current protection, and over-load protection..
Check Stock

Reboot Plasma Cutter IGBT Inverter 40 Amps RBC-4000 AC 110V Air 1/2 Cutting Plasma Cutting High Frequency Duty Cycle for Aluminum Stainless Mild Steel Copper Iron Chrome-Blue

  • Pilot Arc Function,Plasma cutter pilot arc 50Amps with pilot arc function,Very easy to cut Rust/Dust/painted metal. It is made of high quality....
  • Pilot arc Plasma Cutting machine 60% Duty cycle in 50Amps, 100% duty cycle in 40Amps under 240v, 18mm max cutting thickness, 12mm quality cutting....
  • Machine with current display, Also with air post time adjust function, the adjustment range is 2-15 seconds ,this function allow user adjust the time....
  • Accessories come with machine, 4M Pilot arc AG60P cutting torch, Earth clamp with 2.5M cable, 5 pcs tips, 5 pcs electrodes, 2 meters air hose, 4 pcs....
  • Two years warranty for this machine, the buyer can get free service within two years if machine have any problems.
Check Stock

Amico ARC-200 200-Amp Stick Arc & Lift-TIG Combo Welder 100-250V Wide Voltage 80% Duty Cycle Compatible with all Electrodes E6010 E6011 E6013 E7014 E7018 etc.

  • ARC-200 is a professional Stick Arc and Lift-TIG combo welding machine with an industrial level design. It is compatible with all electrodes: E6010,....
  • Automatic selection feature detects input voltage automatically, allowing you to easily switch between 100~250V/50~60Hz input power. Almost all of the....
  • Incorporates advanced IGBT inverter technology with superior arc characteristics and has excellent arc stability. 80% duty cycle at 200 amps ensures....
  • ARC-200 has very powerful functions, making it easy to start and use. The machine has a built-in hot start function, anti-stick function, thrust....
  • ARC-200 Stick Arc with Lift-TIG can achieve the perfect weld. It is a welding machine of the highest level.
  • the strength of its components makes it a....
Check Stock

Amico ARC-180DC 180-Amp Stick Arc & Lift-TIG Combo Welder 100-250V Wide Voltage 80% Duty Cycle Compatible with all Electrodes E6010 E6011 E6013 E7014 E7018 etc.

  • ARC-180DC is a professional Stick Arc and Lift-TIG combo welding machine with an industrial level design. It is compatible with all electrodes: E6010,....
  • Automatic selection feature detects input voltage automatically, allowing you to easily switch between 100-250V/50-60Hz input powers. Almost all of....
  • Incorporates advanced IGBT inverter technology with superior arc characteristics and has excellent arc stability. 80% duty cycle at 180 amps ensures....
  • ARC-180DC has very powerful functions, making it easy to start and use. The machine has a built-in hot start function, anti-stick function, thrust....
  • ARC-180DC Stick Arc with Lift-TIG can achieve the perfect weld. It is a welding machine of the highest level.
  • the strength of its components makes it....
Check Stock

T TOVIA Welding Electrode Holder ARC Stick Manual Screw Twist Type Head, 300 Amp

  • Fully insulated head mechanically holds the stick electrode tight for easy bending & better arc control eliminating arc out problems.
  • Firmly holds electrodes up to 5/32" (4mm) diameter in 45° or 90° positions to accommodate a variety of welding applications.
  • Round DMC head provides increased visibility, and allows rod to be burnt to the end.
  • Insulated rubber handle with copper core for both high conductivity and improved cable connections.
  • The base of the handle has a rubber that surrounds the wire preventing debris and water to some extent from entering the handle.
Check Stock

VEVOR Hydraulic Rebar Bender, 3000W, Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine For Bending Rebar, Steel Bar, Steel

  • 6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1-1/4" #10 Grade 60(6 to 32 mm) within 6 to 7 seconds. Bending Angle: 0-180°,Bending Radius: 1.97'' / 50 mm, Max. Rebar Hardness: HRC30..
  • 3000W Pure Copper Coil Motor: This portable rebar bender features a 3000W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 26A, Noise: 105 dB(A)..
  • Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When operating under point 2, fix angle of point 2 same as or no larger than point 1 of 5 degree, to ensure that under the condition when exterior shock attacks the machine itself will not move to left and right to operate the machine..
  • Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel ....
Check Stock

VEVOR Hydraulic Rebar Bender, 3000 Wattage Electric Rebar Bender, 1-1/4'' / 32 mm #10 Grade 60 Max Rebar Diameter, Rebar Steel Bender Machine, Bending Machine for Bending Rebar, Steel Bar, Steel Rod

  • 6-7S Ultra-Fast Bending Speed: This electric rebar bender is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1-1/4" #10 Grade 60(6 to 32 mm) within 6 to 7 seconds. Bending Angle: 0-180°,Bending Radius: 1.97'' / 50 mm, Max. Rebar Hardness: HRC30..
  • 3000W Pure Copper Coil Motor: This portable rebar bender features a 3000W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this electric rebar machine's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 26A, Noise: 105 dB(A)..
  • Angle Adjustment Knobs: This rebar bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When operating under point 2, fix angle of point 2 same as or no larger than point 1 of 5 degree, to ensure that under the condition when exterior shock attacks the machine itself will not move to left and right to operate the machine..
  • Sturdy Machine Body: The electric bender machine adopts a sturdy iron machine body and durable Idler Wheel. φ78 / 109 Fixed Idler Wheel ....
Check Stock

VEVOR Hydraulic Rebar Bender, 1700W, Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

VEVOR Hydraulic Rebar Bender 1700 Wattage Electric Rebar Bender and Cutter, 1''/25 mm Max Rebar Diameter, Rebar Steel Bender and Cutter Machine, Bending Machine For Bending Rebar, Steel Bar, Steel Rod

  • Ultra-Fast Working Speed: This rebar bender and cutter machine is designed with excellent performance. It helps save valuable person-hours by bending rebar 1/4'' #2 to 1" #8 Grade 60(6 to 25 mm) within 6 to 7 seconds. It can also cut rebar within 5-6 seconds. Bending Angle: 0-180°. Bending Radius: 1.57'' / 40 mm, Max. Rebar Hardness: HRC30, Hydraulic Oil Type: VG46..
  • 1700W Pure Copper Coil Motor: This rebar cutter and bender features a 1700W pure copper motor, which can run quietly with low noise and significantly improve your working efficiency, reducing unnecessary wear. Besides, a copper motor can extend this rebar bender cutter's operating life to a large extent. Voltage: 110V, Frequency: 60 Hz, Amps: 14A, Noise: 92 dB(A)..
  • Angle Adjustment Knobs: This rod bending machine has two slide-type angle selectors, which can help you accurately bend any angle from 0-180 degrees. Preset angle locks are designed for repeating the same angle bending. When bending processing, the angle of point 1 must be bigger than point 2. Otherwise, the machine can not operate normally..
  • Sturdy Machine Body: The bar bender machine adopts a sturdy iron machine body and durable Idler Wheel. Ø78 iron Gyre Idler Wheel and Ø94 Fixed Idler Wheel are stronger and not easy t....
Check Stock

T TOVIA Stick Welding Electrode Holder ARC Stick Manual Screw Twist Type Head, 200 Amp

  • 【Insulated head for better control】Fully insulated head mechanically holds the stick electrode tight for easy bending & better arc control eliminating arc out problems..
  • 【 a variety of welding applications】Firmly holds electrodes up to 5/32" (4mm) diameter in 45° or 90° positions to accommodate a variety of welding applications..
  • 【Visible, burnable electrode to the end】Round DMC head provides increased visibility, and allows rod to be burnt to the end..
  • 【Insulated rubber handle】Insulated rubber handle with copper core for both high conductivity and improved cable connections..
  • 【Bottom protection handle】The base of the handle has a rubber that surrounds the wire preventing debris and water to some extent from entering the handle..
Check Stock

250Amp MMA Welder, TEWLEN ARC Welding Machine Kit, Portable 110V IGBT Digital Display LCD Hot Start Welder Electric Welder Machine with Electrode Holder,Earth Clamp,Mask,Brush,Welding Rods,Gloves

  • 【Intelligent IGBT Inverter Welder】Arc welder machine adopt advanced IGBT inverter technology, superior arc welding performance,good arc stability, can reduce copper and iron damage, improve the efficiency and reliability of the welder, less spatter, and smooth weld, achieve perfect welding. The welding machine supports the use of 3/32'' -1/8'' (2.5mm-3.2mm)welding rods, suitable for welding various metals such as welding carbon steel,welding mild steel,weld steel, stainless steel and cast iron..
  • 【Safety and Durability Welding】250Amp stick welder features with anti-sticking device, hot start, arc force over protection, and built in fan helps to dissipate heat. It can prevent overheating, overcurrent, and overload, pure copper core cable, makes the current output stable to ensure safe operation. Durable MMA welding machine, stable and reliable, light weight, energy-saving, no electromagnetic noise, and can be widely used for home general repair work and fitment of inside or outside..
  • 【Simple Operation】Electric welding machine with LCD display and full-digital control system makes easy to read and use, novices can use it for practice. Any welding work can be easily started,the current adjustment range is 20A to 250A,it can be adjusted accordin....
Check Stock