Top Bendable Aluminum Sheet Metal Reviews

#8 x 1/2\ Phillips Modified Truss Head Self-Drilling Tek Screw, Zinc-Plated Steel for Sheet Metal Attaches Wire Lath to Metal Studs - Box of 100

HIGH QUALITY ZINC-PLATED STEEL: Phillips Modified Truss Head Sheet Metal Screw made of 100% high quality durable steel with hard Zinc Plating, built to last years with no wear and tear.
RUST RESISTANT: Zinc Plating provides an excellent corrosion resistant shell for a long lasting cost effective fastener.
CONVENIENCE: Phillips Modified Truss Head Sheet Metal Screws are known to be convenient and versatile. Great to have while working with sheet metal environment. Suitable for indoor and outdoor applications.
For use in Sheet Metal Steel, Attaches Wire Lath to Metal Studs or Metal or Aluminum to Metal or Aluminum. Installed with #2 Phillips Driver.
Amazon Protected Money-Back Satisfaction Guaranteed.

Check Stock

XINPUGUANG 100W 12V Flexible Solar Panel Monocrystalline Charger Lightweight Charging for Camping RV Boat Caravan Cabin Tent Car(100W-1)…

★Monocrystalline Solar Cell:Class A solar monocrystalline cell ，Top ranked PTC rating，up to 20% Conversion efficiency，fast and inexpensive.
★Bendable Panel: The plastic back sheet can be curved to a maximum 30 degree arc and mounted on an RV, boat, cabin, tent, car, trucks, trailers or any other irregular surface.
★Thin and Lightweight:weight 1.9kg（4.19），Thickness 3mm，this flexible solar panel weighs only a quarter of its traditional 100W counterpart，For installations with low endurance, it is best choice..
★Nice Details: The water resistant semi-flexible solar XINPUGUANG panel is far more durable than traditional glass and aluminum models.
The junction box is sealed and waterproof..
What you get: 100W bendable monocrystalline solar panel, instruction manual, 18-month guarantee and friendly customer service.

Check Stock

HOZEON 2 Pack 6061 Aluminum Sheet 12 x 12 x 1/4 Inches, Sturdy and Durable Aluminum Plate, Heavy Duty Metal Aluminum Sheet for Construction, Elevator, Transportation, Electronics, Aviation

HIGH-QUALITY ALUMINUM SHEET - The aluminum sheet is made of high-quality aluminum alloy material produced by heat treatment and pre-stretching process. It has excellent processing performance, good corrosion resistance, and excellent oxidation effect. It is very suitable for construction, elevator, transportation, electronics and other industries..
PROFESSIONAL CUTTING AND PROTECTION - The aluminum plate is precisely cut by a professional cutting machine. The surface of cut is straight and flat, without burrs, strong and durable, which can meet your needs. It is protected by a double-sided film to ensure that you receive a perfect and crack-free metal aluminum sheet..
EXQUISITE APPEARANCE - The surface of the aluminum sheet is smooth, without burrs, and has an amazing and perfect appearance. In addition, aluminum sheet 12 x12 inches has the characteristics of high hardness, stable performance, and easy cutting and processing. It is the high-quality aluminum sheet you have been looking for..
MULTIFUNCTIONAL ALUMINUM SHEET - The aluminum sheet 1/4 inch has unlimited uses, which is very suitable for aviation, ship, automobile, construction, elevator, transportation, electronics and other industries. Don't hesitate, take it home quickly!.

Check Stock

540 Feet Aluminum Wire, Anezus Bendable Craft Metal Wire 18 Gauge Flexible Beading Wire for Wreath Making Jewelry Making Floral (Silver, 1mm)

【ALUMINUM WIRE VALUE PACK】Anezus aluminum wire comes with a roll of 540 feet metal craft wire. The metal wire can be bent smoothly and hold the shape well.
【DURABLE ALUMINUM WIRE】This flexible craft wire is made of solid aluminum with features of rusting proof, tarnish free, bendable and flexible. It has good strength and is pretty easy to manipulate.
【METAL WIRE SIZE】The armature wire with thickness of 18 gauge (1mm).
Length 540 feet (about 165m). With nice long length, extremely flexible and very durable, enough for various craft projects.
【WIRE for Crafts】The flexible wire is strong and soft enough for variety of art and craft projects such as wreath making, jewelry making, sculpturing, wire weaving, doll making supplies, stone wrapping, decorating, crafting, beading, florist arranging, gardening and more.
【CONVENIENT SPOOL PACKAGE】This aluminum wire is packaged with a sturdy spool which is convenient to take the metal craft wire out and keep them organized without messy.

Check Stock

Eagle 1 Painted Aluminum Flashing Rolls-75 FT x 11.75 and 15 -.027 Heavy Duty Aluminum-Many Colors-Includes 100 Matching Sheet Metal Screws Bit Driver and Free Gloves 11.75 Wide Black

Easily cuts with normal tin snips. Bendable to the shape you need..
Great for roof flashings, fascia coverings, concrete barriers, and many more do-it-yourself projects.
Includes 100 matching sheet metal screws, 1/4" Hex bit, and gloves.
Eagle 1 is a full service sheet metal shop. Feel free to call or text about your project. (256) 566-0012.

Check Stock

Dirnatel Ts3 New Electric Drill Plate Cutter,Metal Nibbler Drill Attachment with Adapter, Variable Speed Swivel Head Electric Metal Cutter Shear

[Strong Cutting Ability] Dirnatel TS3 Metal cutter tool has a faster cutting speed than other sheet metal cutting tools, powerful than ordinary scissors and knives..
[Usable range]: Sheet metal nibbler With a high hardness cutting head,this nibbler attachment can handle iron sheet(0.1-1mm),steel sheet(0.1-0.8mm),copper sheet(0.2-1.2mm),aluminum sheet(0.2-1.2mm)..
[Easy to Use]: Metal cutter attachment quickly transforms your drill into an electric shear that fits perfectly on the chuck of your drill. with an adapter handle, adapt to a variety of different electric drills..
[Matters need attention] The metal nibbler drill attachment board cutting machine is suitable for cutting flat sheet metal less than 1mm. Do not cut with angular, special shape, welding sheet metal and non-metallic materials.If it is stuck, set the drill bit to reverse to automatically exit..
[After-sales service] : After purchasing Dirntel brand products, we will provide you with up to 2 years of after-sales service, if you have any questions, please contact us. Thank you very much!.

Check Stock

12 Pcs Metal Shim Stock 316 Stainless Steel Sheet Shim Flat Sheets of Metal for Kitchen DIY Craft Making Marine Application 0.001 0.0015 0.002 0.003 0.004 0.005 Inch Thick 6 x 12 Inch

316 Stainless Steel: this 316 stainless steel shim stock is made of 316 stainless steel material, which has corrosion resistance, rust resistance, high temperature resistance performance.
Wide Applications: this stainless steel sheet shim is bendable that can be machined or cut into various parts, such as metal shims, washers, spacers and more, and you can DIY crafts as well.
Proper Sizes: this stainless steel sheet metal is approx. 30.48 x 15.24 cm/ 12 x 6 inches (length and width), with various thickness, including 0.001 inch, 0.0015 inch, 0.002 inch, 0.003 inch, 0.004 inch, 0.005 inch, which can meet your different uses.
Sufficient Quantity: please be careful not to cut your fingers and open the package carefully.
There are 12 pieces of stainless steel metal sheets in the package, enough for your various uses and replacements, 6 different thicknesses, 2 pieces each.
Practical Gifts: you can give this set of sheet of stainless steel to your family, colleagues and friends, and they will be very happy to receive such a practical and useful gift.

Check Stock

Moroso 97340 Valve Cover Breather Grommets, Pair

Designed to work with Fabricated Sheet Metal and Cast Aluminum Valve Covers, without logo, that have a 1.220" diameter hole.
Replacement Valve Cover Grommets for breathers and oil filler caps two per pack.
Designed to work with Fabricated Sheet Metal and Cast Aluminum Valve Covers, without logo, that have a 1. 220" diameter hole Replacement Valve Cover Grommets for breathers and oil filler caps two per pack.

Check Stock

Muzata 15PACK 3.3FT/1M Flexible LED Channel with Milky White Cover Lens,Bendable Aluminum Profile Housing for Strip Tape Light Anodized Flush Corner Mount U106 1M WW,LB1

These flexible LED channel housing is 0.5"(12mm) wide,fits 3528, 5050,5630 LED strip light,Philips Hue light strip 1st generation.Search for "MUZATA....
Muzata bendable u-shaped aluminum LED channel/profile is anodized extruded and better heat dissipation.Frosted diffuser cover works well to help....
These bendable LED channel aluminum extrusions can be bended to the right shape at will,this flexible ultra thin U-shape anodized silver aluminum....
These bendable LED channels are designed for recessed/surface mounting to tie-in furniture,under cabinet,shelves,drywall,wooden partitions.
PACKING INCLUDED :This 15 pack U-shape aluminum bendable LED channels/extrusions/profiles come with 15pcs milky white plastic cover, 30pcs end caps,....

Check Stock

Aluminum Craft Making Wire 18 Gauge 394 Feet Bendable Craft Making Wire Floral Jewelry Beading Wire for Jewelry Making Beading Floral, Silver, 1 mm

Nice combination: you will receive 1 roll of aluminum craft making wire and 1 piece wire cutter, 394 feet aluminum craft making wire is enough for your most kinds of hand crafts works, bring you much convenience.
Bendable material: 18 gauge 394 feet bendable metal craft making wire is made of flexible yet durable aluminum with features of rusting-proof.
The wire is durable but still bends smoothly and hold the shape well.
Wire cutter tool: to facilitate your crafting, this jewelry making charms set also contains a multi-purpose cutter, this wire cutter is ideal for cutting tool or other wire, practical and useful for you.
Jewelry making wire: floral jewelry beading wire is strong and flexible, suitable for jewelry making such as wrapped around pendants or made into bracelets, necklaces, rings, hair crafts and more, enough for your most kinds of hand jewelry making.
Wide application: this jewelry beading wire can not only fit for jewelry making but also use for crafts making projects, making frames, wire weaving, sculpture projects, wrapping, crafts bike, you can enjoy DIY time with your family.

Check Stock

New Metal Nibbler Drill Attachment, Electric Sheet Metal Cutter, Electric Drill Plate Cutter, Electric Drill Shears Attachment Cutter Nibbler

...orrosion resistant, not easy to break and deform, can be used for a long time..
【Cutting Range】The metal nibbler drill attachment is suitable for cutting flat sheet metal less than 1mm. This nibbler attachment can handle iron sheet(0.2-1mm), white sheet (0.3-1mm), steel sheet(0.2-0.8mm), copper sheet(0.3-1.2mm), aluminum sheet(0.3-1.2mm)..
【Wide Compatibility】The Electric Drill Shears has a wide range of application and is compatible with most of the hand drills, lithium drills and impact drills in the market. It can be used to cut all kinds of metal plates, such as aluminum, steel, iron, copper and other alloy materials..
【Warm Remind】 We do not recommend cutting stainless steel and special high hardness alloy material, otherwise it will damage the machine. If stainless steel must be cut, the thickness of stainless steel must not exceed 0.5 mm..
【Package Contents】 The package includes 1 electric drill plate cutter (drill not included), 1 large wrench, 1 small angle wrench, 1 L-shaped wrench and 1 instruction manual. The blade is very sharp, so please be careful when using it..

Check Stock

Ziqi 6061 T6 Aluminium Metal Sheet 12 x 12 x 1/8 Inch Thickness Flat Plain Plate Panel Aluminium Metal Sheets Plate Finely Polished and Deburred

【6061-T6 Aluminum Metal Sheet】Corrosion-resistant aluminium alloy, good processability and weldability, medium strength, 1/8 Inch Thickness.
【Overview of 6061】 6061 metal sheet has excellent processing performance, excellent welding and electroplating characteristics, good corrosion resistance, high toughness and no deformation after processing, dense materials without defects and easy polishing, easy to color film, excellent oxidation effect and other excellent characteristics.
【Forging】6061 aluminum sheets can be forged at temperatures in the range of 750°F to 900°F. Hot working may be done in the temperature range of 500°F to 700°F.
【Cutting flat】12x12 Aluminum sheet use professional cutting machine cutting, saw smooth smooth, no burrs on the edge. The normal tolerance is 1-3mm.
【Widely used】6061 Aluminum plate used in decoration, packaging, construction, transportation, electronics, aerospace,and other industries, Use indoors or outdoors.

Check Stock

Eastwood 12 in. Box and Pan Sheet Metal Brake Easy Adjustment Box with 5 Adjustable Fingers

The Eastwood 12 Inch Box And Pan Sheet Metal Brake Is The Perfect Size For A Small Shop Or Home Use..
Bends Sheet Metal Up To 12 in. And Makes Bends Up To 135 Degreess.
Metal Gauge: Up To 20 Gauge Steel, 16 Gauge Aluminum Or 24 Gauge Stainless.
Mounting Area Dimensions: 14 in. X 10.75 in..
Overall Dimensions: 16.5 in. Wide X 10.75 in. Deep X 14.25 in. Tall.
Removable Fingers To Create Pans Or Boxes.
Bends Up To 20 Gauge Steel, 16 Gauge Aluminum Or 24 Gauge Stainless Steel.

Check Stock