Top Bench Vise For Woodworking Reviews

Work Bench Vise with 2 Packs Magnetic Vise Jaw Pads, Metal Table Vise with Swivel Base and Anvil, Heavy Duty Bench Vice for Home Workbench Woodworking Tool, 4.5 Inches, Blue

  • 4.5 Inches Bench Vise Set: the package includes 1 piece blue bench vise and 2 pieces of magnetic vise pads, ready to install and use, no need to spend time looking for the right accessories.
  • Proper Size: machinist bench vise measures approx. 4.5 inches wide, opening size is up to 4.5 inches, magnetic vise pads measure about 4.5 inches long, matching size for simple operation and use.
  • Multi Functional Uses: our small bench vises are suitable for small parts processing and watch repair, such as woodworking, metalworking, sawing woodworking, drilling and bonding auxiliary installation.
  • The magnetic vise pad features a non slip design on the back, which is magnetic and difficult to separate when using.
  • Convenient to Use: the swivel vise is a lightweight tool that requires very little effort to get the job done and can be easily secured to the workbench for more convenience in your daily work.
  • Sturdy and Firm: the vice clamp adopts aluminum alloy material, and the magnetic vise pad is made of silicone and magnet, featuring a smooth surface and clear detail texture, which can apply for a long term use.
Check Stock

SWANLAKE 4.5 Inch Vise Jaw Pads Covers Protectors 1 Multi-Grooved & 1 Standard Set

  • These soft jaws for bench vise are made of Thermoplastic polyurethane rubber which is sturdy enough to hold your workpiece firmly in place and protect it from your metal bench vise..
  • Each vise pad set has 4 strong, rare earth magnets to ensure that they will stay firmly in place once attached to your table vise..
  • This 2 pack set with both standard & multi-groove jaw pads 4.5″ will work with a 4 inch to 5 inch bench vise..
  • This vise jaw covers feature groove sizes: 90 Degree angles: 1/16″, 1/8″, 1/4″, 3/4″. 60 Degree angle: 13/32″..
  • These vise jaws are ideal for woodworking, jewelry making, and more delicate type work..
Check Stock

Yost Vises M10WW Rapid Action Woodworking Vise | Quick Release Lever for Quick Adjustments | 10 Inch Jaw Width | Made with Heavy-Duty Cast Iron | Blue

  • WOODWORKING VISE: The Yost Vises M10WW 10-inch Rapid Action Woodworking Vise is made from 30,000 PSI cast iron with chrome plated steel sliding T-bar handle and steel guide rails. Has a rapid action lever for quick adjustments..
  • TECHNICAL SPECS: Jaw Width 10.5" (26.67 cm), Jaw Opening 14.875" (37.7825 cm), Throat Depth 4" (10.16 cm)..
  • HOW TO USE: To open the vise turn the vise handle counterclockwise. This will move the front jaw away from the stationary jaw to close turn the vise handle counterclockwise. To use the quick release feature of this vise, move the lever toward the vise handle. This will disengage the nut and allow you to quickly open or close the vise. The bench dog can be moved in position by loosening the finger bolt on the front of the vise..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high stan....
Check Stock

Murray Mallee 10 Pack Anchor Wire Vise Grape Trellis Kit - 8,9,10,11 Gauge Wire One Way Trellis Vise with 20 Screws

  • WOODWORKING VISE: The Yost Vises M10WW 10-inch Rapid Action Woodworking Vise is made from 30,000 PSI cast iron with chrome plated steel sliding T-bar handle and steel guide rails. Has a rapid action lever for quick adjustments..
  • TECHNICAL SPECS: Jaw Width 10.5" (26.67 cm), Jaw Opening 14.875" (37.7825 cm), Throat Depth 4" (10.16 cm)..
  • HOW TO USE: To open the vise turn the vise handle counterclockwise. This will move the front jaw away from the stationary jaw to close turn the vise handle counterclockwise. To use the quick release feature of this vise, move the lever toward the vise handle. This will disengage the nut and allow you to quickly open or close the vise. The bench dog can be moved in position by loosening the finger bolt on the front of the vise..
  • YOST VISES QUALITY: Every Yost Vises tool is engineered to have high stan....
Check Stock

Bench Vise, Portable Work Bench Clamp Vise with Tilts Rotate 360°, 3" Home Table Vise Clamp-On for Woodworking, Drilling, Sawing, Jewelry Making

  • 【Universal Table Vise】This 3-inch universal bench vise has a jaw width of 3 inches/79mm and an opening of 2 inches/51mm. Clamps to surfaces up to 2 inches thick..
  • 【Sturdy Material】The portable bench vise is made of heavy-duty aluminum, this table vise offers incredible strength for gripping objects with ultra durability..
  • 【Multifunctional Use】The adjustable vise is suitable for woodworking, jewelry, hobby, model making, electronics and other fields to fix small parts..
  • 【Rotatable Design】Universal bench vise head rotates 360 degrees and tilts 45 degrees to hold securely at any angle..
  • 【Easy to Install】The oval base can be easily and quickly mounted on the desk without any tools..
Check Stock

VEVOR Woodworking Vise, 9 Inch Woodworking Bench Vise Heavy-Duty Cast Iron Wood Working Vise, Quick Release Woodworker's Vise 10' Jaw Opening, Front Screw Vise for Woodworking, Cutting, and Drilling

  • 9 Inch Professional Use: Jaw width: 9"/230 mm. Jaw opening: 10". Throat depth: 4". Weight: 35.0 lbs. Our professional-grade woodworking vise is built to exact specifications for optimal performance. Get ample holding power and increase your cutting accuracy with half the effort..
  • Superior Iron Structure: Our heavy-duty woodworking bench vise is constructed out of cast iron and has polished guide rods designed for rugged use and extended life. The end stop prevents the vise from being opened too far..
  • Convenient Operation: The quick-release mechanism enables you to utilize this woodworker's vise quickly and efficiently. Pull up on the handle and hold.
  • this will cause the vise nut to disengage. Adjust the jaws to the appropriate opening and let go of the handle. A simple turn of the main handle will engage the screw and tighten the vise on the product..
  • Simplified Installation: This wood working vise comes with pre-drilled holes in the baseplate for quick mounting to your workbench or machine table. The jaws are also pre-bored to enable the installation and attachment of custom non-marring jaw faces to secure workpiece materials..
  • Widely Applied: The woodworking front vise is suitable for home, woodworking studios, teaching equipment, and fixed for process....
Check Stock

Bench Vise 3' Cross Slide Vise Flat Vise Bench clamp Drill Press Vise Clamp Metal Milling Vise Cross Sliding Vise Benchtop Vise

  • 【Size】Maximum jaw is 2.73in, that is 80mm, and vise specification is 3in, which is very convenient.The handwheel has 0.1 mm increments marked by the machine for maximum accuracy. X direction adjustment is 80 mm. Y direction adjustment is 67mm..
  • 【Industrial Strength】With durable high-density aluminum alloy structure, the bench vise is very durable and sturdy.With high-strength accuracy screw, the bench vise is not easy to slip or deform..
  • 【Hand Tool with Rotating Handle 】2 rotatable handles can adjust vise front and back, bolt fixing slot can be fixed..
  • 【Silicone Protection】The gripper is equipped with a removable silicone pad, which can better protect the workpiece during operation..
  • 【Easy to Use】The vise can be used with drill stand and bench drill, etc. Vise is suitable for woodworking and metal processing..
Check Stock

Mophorn Woodworking Bench Vise 10.5 Inch,Heavy-Duty Steel and Cast Iron Structure Woodworking Front Vise,Easy-to-operate Workbench Vise,Durable Woodworking Vise for Home, Woodworking Studios

  • 【PREMIUM IRON STRUCTURE】 - The wood vise has an all-iron structure with paint coating, resistant to wear, corrosion, and rust. At the same time, it is solid to use..
  • 【CONVENIENT DESIGN】 - You can easily mount this woodworking vise to your workbench. The 10.5-inch guide bar makes it easy to work and holds things more firmly. Two screws are added to the connecting rod to prevent the anti-stripping..
  • 【SIMPLE TO USE & 10.5 INCH JAW】 - This woodworking bench vise is easy to use. Adjust the jaws to the appropriate opening and let go of the handle. A simple turn of the main handle will engage the screw and tighten the vise on the product. Jaw Width: 262 mm/10.5"..
  • 【LONG SERVICE LIFE】 - This woodworking vise for workbench features a simple and solid frame, durable for long-term use. It is compact and lightweight for easy carry, use, and storage..
  • 【WIDE APPLICATION】 - The professional-grade woodworking vise is designed for the home craftsman. These vises are built to exact specifications for optimal performance..
Check Stock

Nuovoware Heavy Duty Bench Vise 4.5 Inch, 240° Swivel Locking Base Bench Clamp with 125mm Vise Jaw, Clamp-on Home Merchanic Vice Desktop Clamp for Woodworking, Drilling, Cutting Conduit - Black&Blue

  • ...stallation and offload for any other metal bench vise, make your projects efficiently..
  • 【Wide Application】: The smooth and dependable action bench vise is ideal for professional use, home, workshop, educational institution use, providing clamping for light applications, such as cutting conduit, drilling, gluing, woodworking, metalworking, sanding or planing, sawing and so on..
Check Stock

VEVOR Woodworking Vise 7 Inch Woodworking Bench Vise Heavy-Duty Cast Iron Wood Working Vise Quick Release Woodworker s Vise 8 Jaw Opening Front Screw Vise for Woodworking Cutting and Drilling

  • 7 Inch Professional Use: Jaw width: 7"/180 mm. Jaw opening: 8.1"/205 mm. Throat depth: 2.8"/70 mm. Weight: 21.2 lbs. Our professional-grade....
  • Superior Iron Structure: Our heavy-duty woodworking bench vise is constructed out of cast iron and has polished guide rods designed for rugged use and....
  • Convenient Operation: The quick-release mechanism enables you to utilize this woodworker's vise quickly and efficiently. Pull up on the handle and....
  • Simplified Installation: This wood working vise comes with pre-drilled holes in the baseplate for quick mounting to your workbench or machine table.....
  • Widely Applied: The woodworking front vise is suitable for home, woodworking studios, teaching equipment, and fixed for processing wood. Compact vise....
Check Stock

FRICTIONWORKS Vise Jaws. Made In USA Pro Grade SH80 Hard Non-Scratch Polymer. 4 Inch Magnetic Bench Vise Covers. N48 Magnets. Fits 3 4 5 Inch Vises and Blocks

  • ...ilure point of all soft jaw pads for metal vises leading to the toughest vise jaws made..
  • ENHANCED MATERIAL – Our proprietary fiber-reinforced polymer composite, shore hardness 80-D, provides an incredibly tough jaw face and works great and is recommended if you really want to clamp down hard. Use for gunsmithing, woodworking, jewelry working, , muzzle device installation, 80/20 Extrusions, plumbing, maching, as a golf club vise, and more. For mid-torque bench vise clamping applications see or SH60 grey medium density vise pads..
  • PROTECTIVE SURFACE – While incredibly tough, our 4″ vise soft jaws specially textured surface won’t mar, scratch or discolor delicate surfaces. Tested safe for clamping on cerakote, chrome, aluminum, wood, plastic, painted surfaces, and more..
  • AWARD WINNING DESIGN – Winner of the 2022 Pro Tool Innovation Award for Clamping Accessories..
Check Stock

Mophorn Wood Vise 9 Inch Woodworking Vise, Heavy-Duty Steel and Cast Iron Workbench Vise, Easy-to-operate Front Vise, Durable Woodworking Bench Vise for Home, Woodworking Studios, Teaching Equipment

  • Professional Use & 9 Inch: This woodworking bench vise is easy to operate. Adjust the jaws to the appropriate opening and turn the handle. A simple turn of the main handle will engage the screw and tighten the vise on the product. Jaw Width: 226 mm/9"..
  • Convenient Design: You can easily mount this woodworking vise to your workbench. The 9-inch guide bar makes it easy to work and holds things more firmly. Two screws are added to the connecting rod to avoid the non stripping..
  • Solid Construction: The woodwork vise has an iron and steel structure with paint coating. The connecting rod is cruder and longer, and the lead screw and the connecting rod are chrome-plated, rust-proof, and corrosion proof..
  • Long Service Life: This wood vice for workbench features a solid frame, durable for long-term use. It is designed with an non off retaining ring. The wood front vise is compact and lightweight for easy carry, use, and storage..
  • Wide Application: The professional-grade woodworking face vise is designed for medium-duty home, shop, or professional use. These end vises are built to exact specifications for optimal performance..
Check Stock

ATLIN Vise Jaws 6' - Nylon, Non Marring Soft Jaws - Multi-Purpose Design for Woodworking, Jewelry Making, Plumbing

  • Non-marring – The vise jaws are made from a tough, but soft nylon. ATLIN 6in vise jaw pads will never mar or damage any of your project materials.
  • Easy Install – The soft jaws attach to your vise with 3 neodymium magnets.
  • Grooved Design – The 6 inch vise inserts feature a multi-purpose design which is ideal for, woodworking, jewelry making, threaded items, pipe, tubing, AN fittings.
  • Universal Compatibility – ATLIN vice jaws are compatible with any 6" milling vise, machine vise, drill press vise, bench vise.
  • Sizing & Specs – vise jaws measure 6" in length, Groove sizes: 3/8" @ 60° angle | vertical grooves: 1/4", 1/8", 1/16" 5/8" | horizontal groove: 1/4" – See second photo for further details.
Check Stock