Top Belt Disc Sander Reviews

WORKPRO Belt Disc Sander, 4 in. x 36 in. Belt & 6 in. Disc Sander with 6pcs Sandpapers, Cast Iron Base for Sanding Woodworking, DIY Decoration

2 in 1 sander: This sanding machine includes a 4 x 36-inch belt sander and a 6-inch sanding disc with extra 3*belt and 3*disc, which meets your different applications, like wood. Woodworking will get a lot easier with the WORKPRO Belt/Disc Sander..
Horizontal & Vertical: The benchtop sanding belt can be adjusted from horizontal to vertical providing different position for sanding work pieces of different shapes and size. Using the hex key loosing the positioning bolt and then adjust the position. Good helper for woodworking and all your DIY needs..
Multi-Angle Sanding: The worktable can be tilted from 0°-45° for bevel sanding. A miter gauge increases accuracy , which is recommended for sanding small end surfaces on the sanding disc..
Powerful Motor: This sander is powerful with 4.3 Amps 1/2 HP motor, providing 1900 SFM of belt speed and 3600 r/min.(RPM) of disc speed, which is more professional than other sanding machine..
Good Design: The tension quick release lever helps you switch and replace sandpaper. Dust port allows a dust-free operation when connecting with a dust collector. Sturdy base can be well fixed on the workbench, ensuring the sander stays stable while you're sanding..

Check Stock

BUCKTOOL BD4801 Bench Belt Sander 4 in. x 36 in Belt and 8 in. Disc Sander with 3/4HP Direct-drive Motor

POWERFUL MOTOR: The belt and disc sander is directly driven by the motor shaft, 3/4 HP High Power Motor and 3450 RPM Disc Speed provide efficient and stable output.
FLEXIBLE BELT: This belt of the benchtop belt sander is 4x36-inch and 80-grit, and it can be placed horizontally or vertically to meet various needs, the cast aluminum worktable can be tilted 0-45 degrees, this makes this machine better suitable for all kinds of woodworking jobs.
STABLE DISC: The diameter of the disk is 8-inch, a heavy steel cover is added to prevent the disc from shaking. There is a miter gauge appliable for fixing the angle of the wood, and the cast aluminum work table also can be adjusted.
PROFESSIONAL DESING: Combining decades of woodworking experience, we have created a machine that is more suitable for users. 2 work tables for both disc and belt, 2 dust ports allows a dustfree operation when connecting with a dust collector, and sturdy cast aluminum base with rubber foot prevents vibrations.
MAINTENANCE FREE: This sander use no belt, no gear, so you don't have to adjust the cog belt tension, change damage cog belt like before, but if you want to sharpen metal, change the sanding belt/disc then you will be good to go.

Check Stock

BILT HARD 4.3A Belt Disc Sander Combo, 6 Inch Disc and 4 x 36 Inch Belt Sander for Woodworking, with 6 Pcs Sanding Paper Kit

2 in 1 Combination: The belt disc sander combination made up of a 4 x 36-inch belt and 6 x 6-inch disc which a great addition to any do-it-yourselfer tool kit or woodworker's garage. Additional 4 x sanding disc: Grit 60# *1, 80#*1, #120*1, #240*1 and 2 x sanding belt: 80# *1, 120# *1. Product Weight: ~ 24.5lb..
Plenty of Power: This belt disc sander powered by a 4.3A motor, provides 3,580 RPM (Disc) and 1,732RPM (Belt), enough to process end grain work, shape subtle round corners quickly large amounts of material..
Easy Adjustment: The 4 x 36-inch belt platform not only raises and lowers from 0-90° to sand smoothly almost any project but also can simple and tool-free and fast To change belts..
Sturdy Base: The cast-iron base can dampen heavy vibration, and the 8 x 5-1/4 inch table tilts to 45° for use with a disc sander. 1-1/4in dust collection port to help minimize dust and debris around the workspace..
WARRANTY - We guarantee this product to be free from defects in materials and workmanship 30 days from the date of purchase. Our support team is on standby for YOU..

Check Stock

Woodskil 4.3A 3/4HP Belt Sander 4 x 36 in. Belt & 6 in. Disc Sander with 2Pcs Sandpapers Steel Base & Aluminum Work Table, Induction Motor Provides Up to 3600 RPM, Double Dust Exhaust Port Included

Upgraded 3/4HP Powerful Motor: Unlike other belt sanders of the same type in the market which only have a 1/2 HP motor, our benchtop belt sander use a 3/4 HP high power motor that provides up to 3600 rpm and 1800 fpm..
Adjustable Sanding Belt: 2-in-1 belt disc sander includes both a 4×36" belt and a 6×6" disc. Position Adjustable Sanding Belt from 0-90 degrees,tilt the bench sander belt from horizontal to vertical position depending on the needs of your project. Adjustable work table 0-45 degrees with the miter gauge..
Double Dust Exhaust Port and Double Safety Switch: this belt sanders for woodworking has 2 dust exhaust ports, disc and belt separate dust exhaust. Removing the safety lock when not in use ensures safety. Sturdy cast iron base to prevent heavy vibration..
Long Belt Life: multi wedge belt drive mechanism extend the belt’s use life, high speed, high sanding efficiency. The table sander belt tension adjustment device prevents the belt from losing. A transparent PC guard helps users easily checking the condition of the belt..
Easily Belt Replacement and Tracking: firstly loose bench belt sander one screw to remove the dust exhaust, then pull the tension lever, release the tension for replacement. Fast track the belt to keep it running in t....

Check Stock

POWERTEC BD4600 Belt Disc Sander For Woodworking | 4 In. x 36 in. Belt Sander with 6 In. Sanding Disc

Includes: heavy duty belt and disc sander combination flaunts a 4”x36” sanding belt, 6” sanding disc, A belt with 0° -90° tilt including a work support, a disc work table with 0° - 45° tilt, a heavy duty miter gauge, and a dust port.
Features: a 6-1/2 x 8-3/4 inch cast aluminum table that provides exceptional work support and tilts up to 45 degrees, precision tracking system, a safety key switch, and a quick release belt change.
sturdy cast iron base and mounting hole prevent wobbling and walking.
2-1 design: sanding machine is equipped with both, an abrasive Belt and disc Combo, large enough and perfectly sized to handle an assortment of sanding and woodworking applications.
Power: enhanced with a quiet but powerful 120V, 60 Hz, 1/2 HP (peak), 4. 3 amp induction motor delivers 1900 FPM For the belt and 3600 RPM for disc speed.
Dust pickup: This belt and disc sander Combo includes one 2-1/4” dust port which provides a tidy and effective dust collection.

Check Stock

Woodskil 4.5-Amp Belt Disc Sander Combo, 4 x 36 in. Belt and 6 in. Disc Sander with 3/4HP Motor, Belt Sander for Woodworking with Base, Bench Sander Upgraded Model

Upgraded 4.5Amp 3/4HP Powerful Motor: The belt and disc sander is directly driven by a 3/4HP 4.5Amp high power motor with 3590 RPM disc speed and 1900 SFPM belt speed to provide efficient and stable output, power belt sanders Weight: 18kg/39.6lb.
Horizontal and Vertical: The sanding belt work table can tilt from 0 to 90 degrees, providing different positions and angles for sanding different shapes and sizes of workpieces. Use the hex key to loosen the positioning bolt and then adjust the position.
Adjustable Table: Work table with miter gauge can be tilted from 0°-45°for bevel grindin, which can be used on both sanding disc and belt. The miter gauge can improve accuracy and the sanding disc is suitable for sanding small end surfaces.
Sturdy Base: This table sander meets CSA standards,2 work tables with both disc and belt, sturdy cast aluminum base and rubber feet for effective protection against vibration, dust port for dust-free operation when connected to dust collector. Removing the safety lock when not in use ensures safety.
Easily Belt Replacement: Firstly loose benchtop belt sander the screw to remove the dust exhaust, then pull the tension lever, release the tension for replacement. Fast track the belt to keep it running in the middle,upgrade th....

Check Stock

POWERTEC BD1502 Belt Disc Sander for Woodworking | 1 in. x 30 in. Belt Sander with 5 in. Sanding Disc

Includes: heavy duty belt and disc sander combination flaunts a 1”x30” sanding belt, 5” sanding disc, 2 work tables with 0° - 45° tilt, heavy duty miter gauge, belt guard, and 2 Dust ports.
Features: 2 cast aluminum tables provide exceptional work support and tilts up to 45 degrees, precision tracking system.
cast iron base prevents machine from wobbling and walking in use.
2-1 design: sanding machine is equipped with both an abrasive Belt and disc Combo, large enough and perfectly sized to handle an assortment of sanding and woodworking applications and can sand hard to reach places easily.
Power: enhanced with a quiet but powerful 120 V, 60 Hz, 1/3 HP (peak), 2. 3 amp induction motor delivers 3160 FPM For the belt and 3450 RPM for disc speed.
Dust pickup: This belt and disc sander Combo includes two 1-3/4 O. D. Dust ports providing a tidy and effective dust collection.

Check Stock

XtremepowerUS 1\ X 30\ Belt / 5\ Disc Sander Polish Grinder Sanding Machine Work Station

?Multifunctional Use - With a powerful motor, it can be used for small & large sanding operations on various materials. It can intricate contour sanding and shaping to fast stock removal.
?High Quality Material Tool - Disc sander is made of heavy duty steel. Durable and can be used for a long time. There is also a strong base on the disc sander, which can prevent any heavy vibrations when you operate. It provides extra stability and safety.
?Convenient and Simple Design - Both belt & disc sanding tables can tilt 45 degrees. It is also equipped with the quick-release belt tension lever, which is easy & quick for you to change the belt. It makes your work more convenient.
?Dust Collection Port - Our disc sander is equipped with a dust collection port, which can minimize clean-up of saw dust and debris. It can keep your work environment more clean.
?Easy to Assemble - All assembly hardware is included in the package. Clear & brief instruction make it much easier to put together. And no professional tools are needed, which can save much time for you.

Check Stock

BUCKTOOL Combo 1' x 42' Belt Sander 8' Disc sander, Knife Sharpener with Large Work Table, Professional Bench Belt Disc Sander with 3/4HP Direct-drive 5.0A Brushless Motor for metalworking, BD1801

POWERFUL DIRECT DRIVE MOTOR: 3/4HP 5.0A brushless TEFC motor provides up to 3150 FPM for the belt and 3450 RPM for the disc, faster removing and polishing metal.
MAINTENANCE FREE & EASY ASSEMBLE: The direct drive motor doesn't need maintenance like other belt-drive motors, and you only need to assemble the 2 worktables to set up this benchtop belt disc sander.
MADE FOR METALWORKING: Belt table was made of cast iron with smooth grinding surface, no damage over years. Also, the main parts of this sander are made of metal, solid and strong. Cast iron base, aluminum belt frame, and all the handles are made of metal The aluminum sanding belt dust outlet can prevent melting when sanding.
EASY DISC & BELT REPLACING: Quick belt changing system helps you change belt in seconds.
Hook and loop disc paper makes change disc not a pain anymore.
MULTI-ANGLE SANDING: The spacious sanding disc work table can adjust from 0 to 45 degrees to meet your different angle needs.

Check Stock

BUCKTOOL Dual Speed 1" x 42" Belt Disc Sander Combo, Bench Knife Sharpener with Large Work Table, Professional Benchtop Belt Sander with Direct-drive 4.8A Brushless Motor for Metalworking, BD1801DS

DUAL SPEED DIRECT DRIVEN MOTOR: 4.8A brushless induction motor can provide 1750 & 3450 RPM speeds for your different needs, 25% more sanding efficiency than belt-driven motor.
MAINTAINANCE FREE & EASY ASSEMBLE: Unlike other belt-driven motors that need yearly belt change, the brushless induction motor do not need maintenance, and you only need to install 2 work tables, then the bench belt sander will be ready to work.
MADE FOR METALWORKING: From work tables to the machine base, and even the belt frame and dust ports are made of metal, this benchtop belt disc sander is just born for metalworking like knife making and all metal polishing.
EASY BELT DISC CHANGE: The easy-remove belt cover and quick belt release system makes belt changes ever fast. Hoop & loop design sanding disc makes disc replacement super easy and does not need to use glue anymore.
MULTI-ANGLE SANDING: the work table for sanding disc can be adjusted from 0-45 degrees for your different angles sanding needs.

Check Stock

RIKON 50-114 4" x 36" Belt / 8" Disc Combo Sander

The belt frame adjusts in any position from horizontal to vertical to meet your sanding needs. Both the disc and belt support fences tilt 0-45 degrees for angled work.
The precision die-cast metal base offers a sturdy platform while the quick release belt lever and large 8″ diameter PSA sanding disc make changes simple and fast. Both the belt and disc functions include tilting tables for sanding fine, detail and angled work..
Includes Belt/Disc Sander, miter gauge, 80 grit PSA sanding disc and 80 grit sanding belt..

Check Stock

Mini Electric Belt Sander 4 in 1 w/ 1'x21' Belt 4' Disc Sander and 4' Alloy Saw Blade for Crafts, 120W Small Wood Cutting Table Saw, DIY Cutting Grinding Drilling Polishing Craft Tool

【Mini table saw belt sander 4 in 1】Adding chuck, flexible shaft and cutting saw kit to the platform of the abrasive belt machine can respectively realize functions such as grinding, polishing, drilling, and cutting, etc..
【Mini belt disc sander】This 1″x21″ belt and 4″ disc sander machine can realize wood, acrylic, metal, aluminum plate sanding and grinding..
【Miniature table saw】Our product can also be assembled into a small table saw to achieve wood, bamboo, acrylic, plastic, aluminum plate cutting, etc. 1.18inch saw blade height cannot be adjusted, 0.39-0.79inch cutting depth..
【Customized 795 motor】This 120W multifunctional abrasive belt sanding machine adopts 795 DC high-temperature resistant motor, with 7-grades regulation speed power supply, with large torque, low noise and long service life..
【Aluminum alloy worktable】The cutting table is made of aluminum alloy, laser engraving black scale, with better precision, clarity and durability. The table push groove adopts T-shaped groove to prevent the material from running out when pushing, and the cutting is better controlled..

Check Stock

Rikon 50-161VS Power Tools 1 x 30 Inch Belt, 6 Inch Disc Variable Speed Sander

Create beautiful small crafts with this 1 by 30-inch belt, 6-inch disc variable speed sander.
Motor is built for efficiency in driving the belt and disc which provides quick stock removal.
Variable speed feature lets you dial-in the best belt or disc speed for sanding performance.
Frame and base are made of sturdy cast metal for extra rigidity.
Tracking knobs allow correct positioning of belts on frames.

Check Stock